Where is the key sensing area of Dongfeng Fengshen AX7?

1 Answers
LandonMarie
07/30/25 10:43am
Dongfeng Fengshen AX7's key sensing area is located at the lock block. Here is some related information: 1. Exterior: The Dongfeng Fengshen AX7-PRO adopts the Interactive Geometry 2.0 design concept, featuring a new track logo, equipped with a luxury matrix full-LED headlight system, IHBC intelligent high beam control system, Wind Wing independent LED daytime running lights, full-LED continuous family-style taillight strip, 19-inch wind-cutting alloy wheels matched with Pirelli tires, capable of handling various complex road conditions with ease. 2. Interior: The AX7-PRO JULANG version is equipped with 6 airbags, and also adds Jamo Danish audio system, wireless phone charging, etc. The AX7-PRO features a wrap-around intelligent cockpit design, using large-area multi-directional soft materials, matched with red and black color-blocked leather sports seats; paired with a 12.3-inch intelligent full LCD dynamic instrument panel, a 1.17㎡ giant-screen intelligent panoramic sunroof, with glass made of specially tempered gray glass, perfectly blocking UV rays from harming the skin.
Was this review help?
16
5
Share
More Forum Discussions

Which Generation is the 2005 Accord?

The 2005 Accord is the seventh-generation model. The Accord is a mid-size sedan under Honda, and this car has now evolved to its tenth generation. The tenth-generation Accord has fully entered the turbocharging era, with a wheelbase of 2830 mm, and dimensions of 4893 mm in length, 1862 mm in width, and 1449 mm in height. The tenth-generation Accord uses three engines in total: a 2.0-liter naturally aspirated engine, a low-power version 1.5-liter turbocharged engine, and a high-power version 1.5-liter turbocharged engine. The model equipped with the 2.0-liter naturally aspirated engine is the hybrid version, which features Honda's i-MMD hybrid technology.
13
1
Share

What is the speed range for fourth gear?

The speed range for fourth gear is typically 40-60 km/h. For most vehicles, the optimal gear shift timing occurs when the engine speed reaches 2000 rpm, preferably not exceeding 2500 rpm. Speed ranges for gears 1 through 5: First gear is for starting, with speeds generally between 0-5 km/h; second gear corresponds to 5-20 km/h; third gear to 20-40 km/h; fourth gear to 40-60 km/h; and fifth gear to 60-100 km/h. Gear shifting precautions: Do not look down at the gear lever while shifting. When shifting gears, there's a tendency to instinctively look down at the gear shift. While looking down, the left hand holding the steering wheel may unconsciously apply a downward force, which can easily cause the vehicle to veer off course. If the speed is slightly high, this could potentially lead to danger. Proper clutch coordination is essential when shifting gears. Whether using the double-clutch shifting method or the single-clutch shifting method, it's important to fully depress the clutch pedal when shifting. After completing the shift but before fully releasing the clutch, gently press the accelerator, then slowly release the clutch, maintaining a semi-engaged state until the vehicle speed stabilizes before completely releasing the clutch. Control speed before shifting. Gear shifts should be determined based on vehicle speed. When upshifting, first increase the speed; when downshifting, first reduce the speed. It's worth noting that when downshifting, to prevent mechanical wear, it's best to use the double-clutch method.
8
4
Share

Is Aisin Owned by Toyota?

Aisin is a subsidiary of Toyota. The 6AT transmission manufactured by Aisin offers smooth shifting performance, along with excellent reliability and stability. Aisin's 6AT transmissions can be found in many vehicle models, and numerous automakers utilize Aisin transmissions. Aisin also produces 8AT transmissions, which feature fast shifting speeds, high transmission efficiency, and smooth gear changes. Aisin primarily specializes in AT transmissions, a mature and widely-used transmission technology known for superior reliability and stability compared to dual-clutch transmissions. A transmission, generally referring to a gearbox, is a mechanism designed to alter the speed and torque from the engine. It can maintain or change the gear ratio between the output shaft and input shaft in fixed or stepped increments.
10
0
Share

What is the fuel consumption of the Volkswagen Tango 4WD?

The combined fuel consumption of the Volkswagen Tango 4WD is 7L/100km. The above is the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for comprehensive driving conditions. The actual fuel consumption is higher than this value, at 8.0L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration and braking, early braking: While driving, press the accelerator lightly to avoid sudden increases in engine RPM and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the manufacturer's recommended level. For every 2 PSI below the recommended value (equivalent to about 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle inspection: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even engine misfires); regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage. Close windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance on the car, requiring more power and thus increasing fuel consumption.
3
5
Share

Where is the Bluetooth in the 2013 Passat?

The Bluetooth in the 2013 Passat can be found in the multimedia system on the center console. Turn on the power of the center screen, press the SETUP button on the side of the multimedia screen, select 'Media,' and then you can find the Bluetooth function in the media list. The car Bluetooth is quite similar to mobile phone Bluetooth; it is designed and developed based on wireless Bluetooth technology, serving as an in-car wireless hands-free system. While driving, connecting your phone to the car Bluetooth allows for hands-free calls, freeing the driver's hands and reducing the probability of traffic accidents. The 2013 Passat has body dimensions of 4872mm in length, 1834mm in width, and 1484mm in height, with a wheelbase of 2803mm.
17
2
Share

What is the fuel consumption per 100 kilometers for the Wuling Rongguang 1.2L?

The Wuling Rongguang 1.2 is equipped with a 99 horsepower engine, with an official fuel consumption of 6.9L per 100 kilometers. The fuel tank capacity of the Wuling Rongguang 1.2 is 45L. When the tank is full, it can travel a distance of 45/6.9*100=652km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.