Where is the key induction area of Baojun 560?

1 Answers
DiEli
07/24/25 12:14am
The key induction area of Baojun 560 is located at the ignition switch. Below is the relevant information: 1. Remote transmitter location: The remote transmitter and battery are integrated into the remote key, and the wireless receiver is installed inside the vehicle. 2. Smart key system: Most cars on the market are equipped with an electronic key device, which is the keyless entry mode, also known as the smart key system. Generally, the remote control and transmitter are installed on the electronic key to sense the vehicle's startup, and the vehicle can be turned off or on via the electronic key. Some electronic keys can also control the vehicle's doors and windows. When the owner uses the electronic key to operate and sends a signal to the vehicle, the vehicle's circuit will sense the command, truly achieving a dual RF system.
Was this review help?
12
4
Share
More Forum Discussions

Does hitting the undercarriage affect the car?

Whether hitting the undercarriage affects the car mainly depends on the part that was hit: 1. If components such as the exhaust pipe or catalytic converter are hit, only the exhaust system parts will be damaged; 2. If suspension components, like the control arm, are severely hit and deformed, the car's wheel alignment parameters will be disrupted, potentially causing the vehicle to pull to one side or produce serious friction noises; 3. If the undercarriage reinforcement components are hit, scraping off the protective coating and exposing the bare metal, it can lead to severe rusting if not treated promptly. The specific impact of hitting the undercarriage can only be determined after lifting the vehicle for inspection. Targeted repair techniques should be applied based on the location and severity of the damage.
3
1
Share

Does the Buick Excelle have a one-key start function?

The Buick Excelle is equipped with a one-key start function, which utilizes radio frequency identification technology. When the owner enters the vehicle, the onboard detection system immediately recognizes the smart card in the key. After confirmation, the vehicle's computer enters the operational state. At this point, the owner only needs to gently press the start button inside the car to start the vehicle normally. The Buick Excelle has a body length of 4609mm, width of 1798mm, height of 1486mm, and a wheelbase of 2640mm. In terms of power, the vehicle is equipped with two drive combinations: a 1.3T dual-injection turbocharged engine paired with a 6-speed DSS intelligent dual-clutch transmission, and a 1.0T dual-injection turbocharged engine paired with a 6-speed DCG intelligent dual-clutch transmission.
1
2
Share

What is the original battery model for the Beijing Hyundai ix35?

Beijing Hyundai ix35's original battery model is CMF60LBCI. Below is the relevant content: ix35 dimensions: The Beijing Hyundai ix35 is a compact SUV. In terms of body dimensions, its length, width, and height are 4500mm, 1850mm, and 1715mm respectively, with a wheelbase of 2640mm. ix35 powertrain: In terms of powertrain, the Beijing Hyundai ix35 is equipped with a 1.4T 140HP L4 turbocharged engine, paired with a 7-speed dual-clutch transmission. It delivers 140 horsepower and a maximum torque of 242 Nm, with a maximum power output at 6000 rpm and maximum torque available between 1500 to 3200 rpm.
11
3
Share

What is the fuel tank capacity of the 911?

The fuel tank capacity of the Porsche 911 Carrera Cabriolet-3.0T, Carrera-3.0T, Carrera-S-3.0T, and Carrera S Cabriolet-3.0T is 64 liters, while other versions have a fuel tank capacity of 67 liters. This data is officially published, and owners of the Porsche 911 can also check it on the vehicle's configuration sheet. The recommended fuel grade for the Porsche 911 is 95 octane. The Porsche 911 Carrera Cabriolet-3.0T, Carrera-3.0T, Carrera-S-3.0T, and Carrera S Cabriolet-3.0T can travel up to 719 km on a full tank of fuel. Other versions of the Porsche 911 have a fuel consumption of 8.9L per 100 km and can travel up to 753 km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, with additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
1
0
Share

Is the handbrake of a front-wheel drive car applied to the front or rear wheels?

In front-wheel drive cars, the handbrake is applied to the rear wheels. Small cars are generally front-wheel drive, so the handbrake brakes the rear wheels while the front wheels are braked by the foot brake. For larger vehicles where the rear wheels are the driving wheels, the handbrake is applied to the front wheels. Long-term use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible and will reduce its effectiveness over time, also increasing the handbrake's travel distance. The professional term for the handbrake is auxiliary brake, which operates differently from the main brake system. It uses a steel cable connected to the rear brake shoes to apply braking force to the vehicle. In some small cars, the handbrake is located behind the transmission, where there is a brake disc connected to the driveshaft, similar to a disc brake system. The parking brake is then achieved by transmitting the pulling force through the steel cable.
16
0
Share

How to Fold Down the Rear Seat Backrest of the Volvo S90?

Method to fold down the rear seat backrest of the Volvo S90: The rear seat folding switch is located inside the trunk, with two handles positioned in the middle below the rear window. Pull the handles toward the rear of the vehicle while simultaneously pushing the seat forward to fold it down. After folding down the rear seat backrest, press firmly on the backrest to ensure it is securely and smoothly folded. The Volvo S90 is a mid-to-large-sized sedan introduced by Volvo Asia Pacific. Its body dimensions are 5090mm in length, 1879mm in width, and 1450mm in height, with a wheelbase of 3061mm. The vehicle features a double-wishbone independent front suspension and a multi-link independent rear suspension.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.