Where is the KAMIQ engine produced?

What is the reference value for tire pressure?

Generally, a tire pressure value between 2.3 and 2.5 is considered normal. If the car is fully occupied (5 people), adjusting the tire pressure to around 2.5 is more suitable; for two people, a tire pressure value of 2.3 is also normal. The relevant content about tire pressure is as follows: Definition of tire pressure: Strictly speaking, it refers to the air pressure inside the tire. Generally, a tire pressure value between 2.3 and 2.5 is considered normal. Standard air pressure can usually be found in the following places: the vehicle user manual, the label near the driver's door (B-pillar), the drawer next to the driver's seat, or the fuel tank cap door. Tire pressure varies under different conditions: In winter, it is advisable to slightly increase the tire pressure by about 0.2 bar based on the standard tire pressure. In summer, if the car is parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to prevent blowouts due to high temperatures. When the car is unloaded or half-loaded, the lower limit of the standard tire pressure can be used (the tire pressure indicated on the vehicle's label can serve as a reference for the minimum tire pressure). When the car is fully loaded, the upper limit of the standard tire pressure should be used (the maximum tire pressure value indicated on the tire can serve as a reference for the theoretical maximum tire pressure).

1

Share

What to Do When the Inspection Validity Period on a New Vehicle's License Expires?

When the inspection validity period on a vehicle's license expires, you should promptly take the vehicle to an inspection station for the annual inspection. According to the "Regulations on the Registration of Motor Vehicles" (Order No. 102 of the Ministry of Public Security), the owner of a motor vehicle can apply for inspection at the local vehicle management office up to three months before the expiration of the inspection validity period. Below are the relevant details: 1. Annual Inspection Date: The validity period on the license indicates the vehicle's annual inspection date. Although the supplementary page of the vehicle license typically includes a reminder for the annual inspection date, some owners may overlook it and forget the inspection time, leading to overdue inspections. The consequences of an overdue inspection include fines for failing to provide a valid vehicle inspection certificate and potential issues with insurance claims in the event of an accident. Therefore, it is essential to have the vehicle inspected before the validity period expires. 2. Rights During the Inspection Period: Under normal circumstances, the annual vehicle inspection should be conducted before the inspection validity period indicated on the supplementary page of the license, while the insurance is still valid. If a vehicle damage incident occurs during this time (e.g., a scratch or collision at the inspection site), the insurance will cover the damages. However, if the vehicle exceeds the inspection deadline without undergoing inspection and an accident occurs, the insurance company has the right to deny the claim.

19

4

Share

What is the difference between aluminum alloy T5 and T6?

Here are the differences between aluminum alloy T5 and T6: Different definitions: T6 treatment: A state achieved after solution heat treatment followed by artificial aging. T5 treatment: A state achieved by cooling from a high-temperature forming process, followed by artificial aging. Different applications: T6 treatment: Suitable for products that undergo solution heat treatment without subsequent cold working (straightening or flattening is allowed, provided it does not affect the mechanical properties), followed by artificial aging. T5 treatment: Suitable for products cooled from a high-temperature forming process without cold working (straightening or flattening is allowed, provided it does not affect the mechanical properties), followed by artificial aging. Different hardness: T6 treatment: Hardness is HB90-95. T5 treatment: Hardness is HB95.

9

2

Share

What Shape of Headrest is the Most Comfortable?

For adults, the length of a pillow should be between 40~60cm, while those over 70cm provide more noticeable and comfortable side support for the head. The width should preferably not be less than 30cm to ensure that both the head and neck are properly supported during sleep, providing adequate support for the cervical spine. Below is relevant information about headrests: Introduction to Headrests: Automotive seat headrests, also known as neck rests, are auxiliary devices designed to enhance the comfort and safety of car passengers. Classification of Headrests: Seat headrests are categorized into fixed and adjustable types. In high-back seats, the headrest is integrated with the seatback and is non-detachable. These high-back seats are primarily used in buses, such as coaches. In low-back seats, the headrest is separate from the seatback and is attached using single or double pins inserted into sockets on the seatback. These low-back seats are commonly found in passenger vehicles, such as sedans. Low-back seat headrests can be either adjustable or fixed, with adjustable types further divided into manual or electric adjustments for height and angle. Most passenger vehicle headrests are adjustable to better fit the neck and back shape of the occupant, improving safety. Some luxury sedans feature front-row headrests with electric four-way adjustments (up, down, forward, backward). In economy models, headrests are typically manually adjustable or fixed, with manual adjustments often limited to height. From a safety perspective, adjustable headrests are preferable to accommodate passengers of different heights.

10

5

Share

Is a Mercedes with 100,000 kilometers considered old?

A Mercedes with 100,000 kilometers is not considered an old car. Below is relevant information about Mercedes-Benz: Meaning of the name: "Mercedes" means happiness, signifying that the cars produced by Daimler will bring happiness to their owners. Mercedes-Benz, a German automobile brand, is regarded as one of the world's most successful premium car brands, renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models. Noble products: Currently, it mainly produces C-Class cars (mid-range sedans and sports cars), E-Class cars (high-end sedans and sports cars), S-Class cars (luxury sedans and sports cars), and G-Class vehicles (SUV off-road vehicles).

7

1

Share

Does Changsha restrict vehicles with non-local license plates?

Changsha city restricts cargo trucks with non-local license plates on certain road sections, while other vehicles are not subject to restrictions. The following is an introduction about license plates: Introduction: License plates, commonly known as vehicle plates, are panels respectively hung on the front and rear of a vehicle. Material: The materials commonly used are aluminum, iron sheet, plastic, or paper, on which the vehicle's registration number, registration region, or other relevant information are engraved. Function: License plates serve as the numbering and information registration for each vehicle. Their main purpose is to identify the region to which the vehicle belongs through the license plate, and the owner of the vehicle as well as its registration information can be traced based on the license plate.

4

5

Share

Where is the KAMIQ engine produced?

What is the reference value for tire pressure?

What to Do When the Inspection Validity Period on a New Vehicle's License Expires?

What is the difference between aluminum alloy T5 and T6?

What Shape of Headrest is the Most Comfortable?

Is a Mercedes with 100,000 kilometers considered old?

Does Changsha restrict vehicles with non-local license plates?

Why is the tire pressure warning light still on after inflating the tires?

What Amperage Should the Charger Be Set to When Charging a Car Battery?

Does High Temperature in the Car Affect Cigarettes Left Inside?

What are the standard values for vehicle exhaust emission testing?