···
Log in / Register

Where is the Jaguar XF engine number located?

3 Answers
LaRebecca
08/26/25 4:45am
Open the engine hood, and you can see it next to the engine oil filler port. Below is the relevant introduction: Positioning: The new generation Jaguar XFL is positioned as a mid-to-large-sized sedan, with tire dimensions of 245/40R19. Here, 245 represents the tire width of 245mm, 40 indicates the tire aspect ratio of 40%, R stands for radial tires, and 19 denotes the wheel size of 19 inches. Engine: The Jaguar XFL is equipped with an Ingenium engine. It features a 2.0T four-cylinder turbocharged engine with a maximum power output of 221 kW, maximum horsepower of 300 HP, and maximum torque of 400 Nm. In terms of the transmission system, it is paired with an 8-speed automatic transmission.
Was this review help?
17
3
Share
McGiselle
09/08/25 6:21am
As a technician who frequently works on Jaguars, let me tell you that the engine number location on the Jaguar XF is quite common. Generally, it's found in the engine compartment. After opening the hood, you can locate it on the front of the engine block, specifically the stamped number on that metal component. To be precise, most XF models have a label near the cylinder head, closer to the intake/exhaust side. If you can't find it, it might be obscured by dirt - I recommend wiping it clean with a cloth or using a small flashlight. I discovered this detail during my first XF inspection, and it's crucial because this number is required for both repairs and ownership transfers to confirm the engine model. Remember, don't randomly touch screws - safety first. If it's truly difficult to locate, check the vehicle manual or visit a Jaguar dealership directly for guidance.
Was this review help?
12
1
Share
Expand All
CarlosFitz
10/22/25 6:26am
I'm a car enthusiast and have been driving a Jaguar XF for several years. I've personally located the engine number, which is in the top area of the engine under the hood. I remember my XF had a plate near the air filter with the number clearly engraved. Beginners might find it a bit confusing, so take your time searching and don't rush to close the hood. Here's a little tip I'd like to share: when I was selling my car, the buyer asked for this number, and I simply took a photo and sent it to him—very convenient. During regular maintenance, technicians also check this, so knowing its location is beneficial for keeping maintenance records. By the way, it's a good reminder to frequently check spark plugs or oil levels to avoid major issues.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

How early can the vehicle annual inspection sticker be obtained?

Vehicle annual inspection stickers can be obtained 3 months in advance. Below is relevant information about vehicle annual inspections: Introduction to vehicle annual inspection: The timing of vehicle annual inspections is not calculated based on specific dates, but rather by month. If a vehicle's annual inspection is due on September 10th, the inspection can be conducted in advance during July, August, or September. Important notes: Vehicles that fail to undergo annual inspection on time and continue to be driven will be subject to fines and 3 penalty points, and the vehicle may be impounded. If the annual inspection is overdue, previously purchased vehicle insurance will not be valid. In case of any traffic accidents during this period, the insurance company will not provide compensation.
13
3
Share

How to Reset the Tire Pressure Monitoring Light on the Outlander?

The method to reset the Outlander's tire pressure light is as follows: When the warning light comes on, locate the tire pressure reset button below the left side of the steering wheel. Press and hold it for a few seconds until the tire pressure warning light turns off, indicating a successful reset. If manual reset fails, professional technicians should be consulted to clear the fault code. The steps to reset the Outlander's tire pressure warning light are detailed below: 1. Drive slowly to a safe location and park. Turn off the engine, wait for 1-2 minutes, and then restart the vehicle. After the vehicle stabilizes, check the tire pressure values displayed on the dashboard. 2. Both underinflation and overinflation can trigger the tire pressure light. Drive slowly to a car repair shop or auto beauty shop to adjust the tire pressure. If you have a personal inflation device, you can adjust the tire pressure on the spot. 3. While inflating or deflating the tires, observe the tire pressure light on the dashboard. Stop inflating once the light turns off. If overinflated, release the excess air. 4. If the tire pressure light remains on after adjustment, a manual reset may be required. Locate the settings button on the vehicle's central console, typically labeled 'SET,' to reset the tire pressure. 5. If the vehicle does not support manual operation, ensure the tire pressure is normal and have a technician use a specialized diagnostic tool to clear the fault code.
14
0
Share

Is Power Steering Fluid the Same as Transmission Fluid?

Power steering fluid and transmission fluid are not the same. Transmission fluid can be used as power steering fluid in cars, but power steering fluid cannot be used as transmission fluid. The main component of transmission fluid is lubricating oil, and the additives used in transmission fluid and power steering fluid are different. Transmission fluid and power steering fluid are absolutely not interchangeable. The main function of transmission fluid is to keep the gear system clean, lubricate the car's transmission device, and extend its service life. Power steering fluid is mainly used to increase driving comfort, automatically providing steering force when the driver is operating the vehicle, making the driving process easier and reducing steering fatigue for the driver.
5
1
Share

What are the symptoms of a broken transmission mount pad?

Transmission mount pad failure symptoms: The car will vibrate when starting, and the stability of the car will be reduced during driving. After the transmission mount pad is damaged, it needs to be replaced immediately. If the transmission mount completely breaks during driving, the support force of the transmission will lose balance. Whether it's an automatic or manual transmission model, the gear shifting will become abnormal during operation. A damaged transmission mount can also cause jerking during transmission operation. The reason for this phenomenon is that the transmission oil temperature is too high, and impurities have appeared inside the transmission oil, leading to jerking during operation.
6
4
Share

Will there be any impact after resetting the transmission?

Resetting the transmission may have some impact, such as increased fuel consumption and gear shifting jerks, but these issues will resolve after some time because the transmission's computer has a learning function. There are three common types of automatic transmissions in vehicles: dual-clutch transmission (DCT), automatic transmission (AT), and continuously variable transmission (CVT). The dual-clutch transmission simply adds an extra set of clutch and shift control mechanism compared to a manual transmission. One set of clutches controls the odd-numbered gears, while the other controls the even-numbered gears. The CVT transmission offers relatively smoother gear shifting. The AT transmission is an automatic transmission with a complex structure and mature technology.
11
5
Share

Where is the OBD interface of Peugeot 3008?

The OBD interface of Peugeot 3008 is located under the steering wheel, specifically at the place where the driver's left knee touches. Inside is the OBD interface. The OBD interface is also called the computer interface, which is translated into Chinese as the on-board diagnostic system. This system constantly monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once a problem is detected, it will record and store the issue. The Peugeot 3008 features a rounded front end, with the engine hood, full front bumper, fenders, and A-pillar all exhibiting a plump and smooth design. This car also offers eight color options for consumers to choose from: Pearl Black, Deep Sea Blue, Neptune Gray, Rainforest Brown, Babylon Red, Mist Gray, Crystal Silver, and Ivory White.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.