Where is the jack placement location for the Mercedes-Benz B200?

Can the old annual inspection sticker be removed?

Can the old annual inspection sticker be removed? The old annual inspection sticker can be removed, provided that the new annual inspection sticker has already been obtained. The annual inspection sticker is a label issued after the vehicle passes the annual safety inspection based on the technical requirements for motor vehicle operation. For new vehicles, the annual inspection sticker can be printed at the vehicle management office when the license plate is issued. For private cars older than six years, the annual inspection sticker must be obtained annually after passing the inspection at a vehicle inspection center. Methods to avoid leaving adhesive residue when removing the old annual inspection sticker: 1. Place a towel on the dashboard, then spray adhesive remover directly onto the annual inspection sticker, ensuring the entire sticker is soaked. Let it sit for two minutes, then peel off the sticker by hand and wipe away any remaining adhesive with the towel; 2. Use a hairdryer to evenly heat the entire annual inspection sticker, then slowly peel it off by hand while continuing to apply heat during the removal process.

6

3

Share

How to Maintain a Turbocharged Engine?

Turbocharged engine maintenance methods: 1. Avoid driving without warming up the engine. After starting the engine, let it idle for a while to allow the lubricating oil to fully lubricate the bearings before the turbocharger rotor operates at high speed; 2. Do not shut down the engine immediately. After prolonged high-speed operation, let the engine idle for three to five minutes before turning it off. Sudden shutdown in a hot engine state can cause the retained oil in the turbocharger to overheat, damaging the bearings and shaft; 3. Keep it clean. Regularly clean the air filter to prevent dust and other impurities from entering the high-speed rotating compressor impeller, which can cause unstable speed or accelerated wear of the shaft sleeve and seals.

8

5

Share

How to Conduct Annual Inspection for China VI Vehicles?

For China VI vehicles, the annual inspection must be conducted within three months before the expiration of the motor vehicle inspection validity period. You need to directly bring the vehicle license, vehicle and vessel tax or tax exemption certificate, and compulsory traffic insurance to the designated processing points to apply for the inspection compliance mark. Inspection stations will no longer handle inspection services for vehicles eligible for exemption. Vehicle annual inspection refers to the annual examination conducted in accordance with relevant regulations for vehicles that have already obtained formal license plates and vehicle licenses. The purpose of the annual inspection is to check the main technical conditions of the vehicle, urge the strengthening of vehicle maintenance, keep the vehicle in good condition, and ensure driving safety. Vehicles with any of the following conditions must be processed according to relevant regulations before inspection: 1. Vehicle conditions do not match those recorded in the vehicle license or archives; 2. License plates or vehicle licenses are damaged, incomplete, illegible, or self-replicated; 3. Vehicle modifications, model changes, or technical transformations have not undergone approval and change procedures; 4. Failure to spray the unit name and enlarged license plate characters as required; 5. Failure to install alarms or indicator lights as required; 6. Failure to pay road maintenance fees and insurance as required.

4

0

Share

What Type of Fire Extinguisher Should Be Used for a Car Fire?

For car fires, use a dry powder fire extinguisher or a water-based fire extinguisher. The main component of a water-based fire extinguisher is RO purified water, which features no dust, suffocation prevention, effective fire suppression, and non-toxic environmental protection. It can spray fire suppressant to evaporate heat from the fire scene, rapidly lower the temperature, and inhibit thermal radiation. Surfactants quickly form a water film on the surface of combustibles, isolating oxygen and providing both cooling and isolation effects, while also participating in fire suppression. This achieves the goal of rapid fire extinguishing without re-ignition. Precautions for using water-based fire extinguishers: 1. Water-based foam fire extinguishers are not suitable for electrical fires. When dealing with electrical fires, the power must first be cut off, and live operation is strictly prohibited to avoid electric shock. 2. When performing maintenance and refilling of the fire extinguisher, it must be done according to its requirements and recommendations.

8

1

Share

Which Cars Use Rotary Engines?

Mazda's models utilize rotary engines, such as the Mazda RX7 and Mazda RX8. The rotary engine eliminates the reciprocating motion effect of pistons in traditional engine cylinders, directly converting the combustion expansion force of fuel and mixed gases into driving torque. Therefore, in terms of size, the rotary engine is smaller than traditional engines, while also featuring a low center of gravity and lightweight characteristics, which to some extent can enhance the car's handling. The Mazda RX8 is a sports car under Mazda, with dimensions of 4460mm in length, 1770mm in width, and 1340mm in height, and a wheelbase of 2700mm. The Mazda RX8's engine has a maximum power of 170 kilowatts and a maximum torque of 211 Newton-meters. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block.

8

3

Share

What tire models are used on the Trumpchi GS4?

Trumpchi GS4 uses two tire models: 215/60R17 and 215/55R18. The tire size specifications are written on the sidewall of the tire. For example, 215/55R18 means the width is 215 millimeters, the aspect ratio is 55, R stands for radial tire, and 18 indicates it can be mounted on 18-inch rims. The GS4 is a compact SUV under the Trumpchi brand, with a wheelbase of 2680 millimeters, and its length, width, and height are 4545 millimeters, 1856 millimeters, and 1668 millimeters respectively. The Trumpchi GS4 is equipped with a 1.5-liter turbocharged engine, which has a maximum power of 124 kilowatts at 5000 rpm, and a maximum torque of 265 Newton-meters. This engine features DCVVT technology and direct fuel injection, and uses an aluminum cylinder head and cast iron cylinder block.

10

2

Share

Where is the jack placement location for the Mercedes-Benz B200?

Can the old annual inspection sticker be removed?

How to Maintain a Turbocharged Engine?

How to Conduct Annual Inspection for China VI Vehicles?

What Type of Fire Extinguisher Should Be Used for a Car Fire?

Which Cars Use Rotary Engines?

What tire models are used on the Trumpchi GS4?

How to Turn Off the Auto Start-Stop Function on the New X-Trail?

Is the Tacqua from FAW-Volkswagen or SAIC Volkswagen?

How to adjust the headlights of Baojun 730?

Where is the radiator cap located on a Prado?