Where is the jack placed in Wuling Hongguang?

3 Answers
LaArianna
07/29/25 3:07am
Wuling Hongguang's jack is placed at a position 20 centimeters away from the front and rear wheels, where there will be a small protrusion or indentation. The indentation at the top of the jack should be aligned with the protruding beam, while the base support must be perpendicular to the support point to avoid displacement that could cause harm. Wuling Hongguang is a microvan under SAIC-GM-Wuling. Taking the 2020 Wuling Hongguang as an example, its body dimensions are: length 4390mm, width 1660mm, height 1750mm, wheelbase 2720mm, and fuel tank capacity 50L. The 2020 Wuling Hongguang is equipped with a 1.2L naturally aspirated engine, with a maximum power of 56kW and a maximum torque of 110Nm.
Was this review help?
18
5
Share
OEverly
08/12/25 1:27pm
I've been driving the Wuling Hongguang for quite some time. The jack is secured under the trunk floor—just lift the trunk mat, and you'll see a dedicated compartment housing the jack and its matching wrench. This design is quite ingenious, as it doesn't take up extra space and remains easily accessible. When putting it back, make sure it's tightly secured to avoid rattling while driving. Before using it, always park on level ground, engage the handbrake, and position the jack at the designated reinforced points under the car. During routine maintenance, remember to check the jack for rust or wear—it would be troublesome if it fails when needed. Avoid storing it in hot or humid places, as prolonged exposure can shorten its lifespan. Safety first—always ensure no one is around when operating it.
Was this review help?
8
1
Share
Expand All
OIan
10/02/25 5:22am
I remember when I first bought my Wuling Hongguang, I had a hard time finding the jack. Later, I discovered it was tightly clipped by a plastic holder on the left side of the trunk. After opening the trunk, it's near the spare tire—just give it a gentle pull to remove it. When putting it back, align it with the slot and push firmly into place. It's advisable not to use the jack on rough roads, as uneven ground can lead to accidents. Keep the tools well-maintained to prevent rust, so they're ready in case of a flat tire. It's good to move them occasionally to ensure smooth operation. The storage spot is quite safe, preventing them from moving around and damaging other items. If you can't find it, don't panic—it's probably hidden under the carpet.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

Is it necessary to turn off the engine when parking for three or four minutes?

It is better to turn off the engine when parking for three or four minutes, as this saves fuel and contributes to environmental protection. Disadvantages of not turning off the engine when parked: Increased fuel consumption: When the engine speed is very low, the intake vortex weakens, leading to poor fuel atomization and incomplete combustion. Additionally, at low engine speeds, valve leakage and piston ring leakage increase. Furthermore, the prolonged contact time between combustion gases and the cylinder walls increases heat loss, resulting in higher fuel consumption. Correct method for turning off the engine when parked: First, press the brake pedal. When the speed decreases to nearly a stop, press the clutch pedal, then firmly press the brake pedal to bring the vehicle to a complete stop.
1
5
Share

Is it safe to leave the car at a 4S shop for repair for several days?

It is very safe to leave your car at a 4S shop for repair, as long as you take away your valuables. Characteristics of 4S shops: Automobile 4S stores are invested and constructed by dealers according to the standards set by automobile manufacturers. They feature unified design both inside and outside the store, with huge investments often exceeding tens of millions, offering a luxurious, grand, and comfortable environment. They can only sell a single brand of cars specially authorized by the manufacturer, providing customers with lower prices, more professional technical support, and more in-depth after-sales services. Unique advantages of 4S shops: Since most 4S shops deal with car brands that have good brand effects, strong competitiveness, and relatively large market shares, brand advantage is their main competitive edge, which is incomparable to other automobile sales models.
14
2
Share

What is the ideal thickness for a paint protection film?

Paint protection film thickness in the range of 6-10mil will not affect the installation or the performance of the film itself. Introduction to paint protection film: Paint protection film is a high-performance, environmentally friendly new type of film widely used in the automotive film beauty and maintenance industry. It is commonly known as a transparent paint protection film, a type of polyurethane film that contains UV-resistant polymers, is resistant to yellowing, and has super toughness and wear resistance. It does not yellow, is easy to apply, resists collisions, and isolates the car's paint from the air after application, protecting against acid rain, oxidation, and scratches, providing long-lasting paint protection. Varying quality: Nowadays, there are many inferior products on the market, mixed in with good ones, sold under the guise of paint protection film at cheap prices. As a result, within six months, the paint starts to bubble.
16
2
Share

Is the 'Lost Car Compensation Agreement' for Mortgaged Vehicles Valid?

Mortgaged vehicle lost car compensation agreement is valid. The parties involved have the corresponding civil capacity and civil conduct capacity, and are entitled to voluntarily enter into contracts according to law. If the content of the contract does not violate legal provisions, the contract is legally valid. Introduction to lost car compensation for mortgaged vehicles: Mortgage refers to the situation where the debtor or a third party does not transfer the possession of the property (i.e., the car) but uses the property as a guarantee for the creditor's rights. If the debtor fails to fulfill the debt, the creditor has the right to preferentially obtain compensation by converting the property into money or by auctioning or selling the property according to the provisions of this law. Principle of mortgaged vehicle compensation: In simple terms, it means that Party A's car is mortgaged to Party B as a form of guarantee. When a car is used as collateral, it is referred to as a mortgaged vehicle.
16
1
Share

Can New Energy Vehicles Be Charged with Household Electricity?

New energy electric vehicles can be charged at home. There are mainly two methods for charging new energy vehicles at home: one is using a household AC charging pile, and the other is directly using a household portable charging gun. Household AC Charging Pile: These are further divided into pole-mounted charging piles and wall-mounted charging piles. The most fundamental difference between the two lies in their installation and usage scenarios. Pole-mounted charging piles are mostly installed in outdoor parking lots, occupying a relatively large area but offering strong applicability. Wall-mounted charging piles are usually installed in indoor parking spaces against walls, taking up less space but requiring more specific usage conditions. Household Portable Charging Gun: It can be directly plugged into a 220V 16A household electrical outlet. After passing the automatic safety inspection of the charging gun, it can be inserted into the electric vehicle for charging. This method does not require the installation of an additional charging pile, making the entire charging process very simple and convenient.
13
5
Share

Why does the Xun Shark have a Honda logo?

Because the Xun Shark is a motorcycle produced by Honda, hence it bears the Honda logo. Introduction to automobile logos: Automobile logos refer to the brand emblems of various car manufacturers, which often serve as representatives of automotive enterprises. These logos include: trademarks or factory marks, product labels, engine models and serial numbers, vehicle model numbers and serial numbers, as well as vehicle identification codes. Functions of car logos: Their purpose is to facilitate sellers, users, maintenance personnel, and traffic management departments in identifying the 'identity' of vehicles. According to national regulations, these logos must be inspected during new vehicle registration and annual inspections.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.