···
Log in / Register

Where is the jack located on the RAV4?

4 Answers
AngeloLee
07/29/25 11:45pm

In the trunk. Here is some relevant information about the RAV4: 1. Introduction: The Toyota RAV4 is the basic model in Toyota's compact multi-purpose off-road vehicle family. Its name comes from the abbreviation of "Recreational Active Vehicle with 4-wheel drive," meaning "four-wheel drive recreational sports vehicle." 2. Model: It adopts a completely new exterior and interior design style, with the overall shape further evolving towards an urban SUV, while the off-road style gradually fades from this model. 3. Positioning: The RAV4 combines high quality and performance with driving comfort and excellent off-road capability, allowing it to adapt freely to both ON ROAD and OFF ROAD conditions, meeting the needs of diverse lifestyles.

Was this review help?
5
0
Share
DiHaven
08/16/25 3:04am

As a RAV4 owner, I once needed to change a tire and researched the correct jacking points. They are usually located on the sill beams on both sides of the vehicle, just below the doors near the wheels, where there are reinforced points or small notches marked. Never place the jack on plastic covers or body panels. I tried changing a tire roadside in an emergency and initially placed the jack incorrectly, almost damaging the car. Later, I checked the manual to find the exact spot. When using the jack, ensure the vehicle is on level ground, the parking brake is engaged, and the transmission is in Park. Position the jack correctly and raise it slowly until the tire is just off the ground. A safety tip: avoid operating on slopes and wear gloves to prevent slipping. Proper positioning protects the body from deformation or accidents—very practical.

Was this review help?
17
3
Share
Expand All
LeBryce
10/19/25 3:57am

I work at an auto shop and have handled numerous RAV4 repairs. The jacking points are located at reinforced areas underneath the vehicle, primarily along the side rails or rocker panels—look for markings or V-shaped notches. These spots feature robust metal structures that securely hold the jack without slipping. Always ensure the ground is firm and use supplementary jack stands for added safety. Misplacement risks damaging the body or causing jack failure. Note that jack points may vary slightly across different RAV4 model years, so owners should familiarize themselves beforehand or snap a photo of the manual’s reference diagram. Before lifting, remove heavy items from the car and avoid rapid jacking—raise gradually while confirming stability. Precise positioning saves time, enhances safety, and minimizes risks.

Was this review help?
18
3
Share
Expand All
HectorAnn
12/02/25 4:33am

I often go on self-driving trips with my RAV4, so I'm quite familiar with how to use the jack. The jacking point is located on the body's sill beam, right next to the tire. Just feel for a solid metal point and align the jack there. Make sure the vehicle is parked on level ground; when changing tires, work quickly after lifting. For safety, never go under the car or use ramps. Positioning it correctly ensures both vehicle safety and peace of mind.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

Do You Need to Press the Brake When Shifting to N Gear in an Automatic Car?

Shifting to N gear in an automatic car does not require pressing the brake. If you encounter a long red light while waiting, you should shift to N gear without pressing the brake and directly engage the handbrake. However, on uphill sections, it is recommended to press the brake for safety to prevent the car from rolling back. Below is some related information about automatic transmission cars: 1. Transmission Types: There are mainly two types of automatic transmissions used in cars. One is the stepped automatic transmission, and the other is the continuously variable transmission (CVT). The most commonly used in passenger cars is the mechanical continuously variable transmission, which uses a V-shaped metal belt or chain to transmit torque between the driving and driven pulleys. This type of transmission is usually used in smaller vehicles. 2. Operational Characteristics: In modern automatic cars, the driver only needs to control the accelerator pedal. The computer analyzes signals from sensors that detect the engine throttle opening and vehicle speed, automatically controlling the gear shifts or engaging different gears. Generally, automatic transmissions may result in some loss of engine power.
14
1
Share

What are the differences between National IV and National V standards?

National IV and National V standards differ in the following aspects: 1. Different emission standards: Compared to National IV, National V has stricter emission standards, resulting in fewer pollutants emitted and being more environmentally friendly. 2. Different control systems: National V mainly features more complex emission control systems compared to National IV, leading to increased costs. 3. Different pollution levels: To further reduce photochemical pollution caused by gasoline evaporation emissions and decrease deposits in car engine intake systems, the olefin content has been reduced from 28% in the fourth stage to 24%. 4. Different evaporation properties: The saturated vapor pressure of National IV gasoline ranges from 42 to 85, while that of National V gasoline ranges from 45 to 85.
13
0
Share

What are the penalties for overtaking over double yellow lines in a car?

Normally, a fine of 200 yuan and penalty points will be imposed. The specific penalties should be determined based on on-site photos and the judgment of the traffic police department. Below is a detailed introduction regarding overtaking over double yellow lines in a car: 1. Overview: Double yellow lines are a common traffic marking on roads, consisting of two parallel solid yellow lines. Double yellow lines are usually placed in the middle of roads without a central divider, separating opposite traffic directions and dividing inbound and outbound vehicles with ground markings. 2. Crossing the line: Under normal circumstances, civilian vehicles are not allowed to cross this line. Some roads with only simple small guardrails may also have double yellow lines. When the double yellow lines are broken, vehicles can turn or make a U-turn at the break in the double yellow lines, provided other traffic signs permit.
8
4
Share

What is the Difference Between Full-Speed Adaptive Cruise Control and Regular Cruise Control?

Adaptive cruise control, compared to regular cruise control, offers a higher level of automation and better adaptability to road conditions. Adaptive cruise control is also known as active cruise control. The system mainly includes radar sensors, an ECU, and its execution module. When in use, the driver only needs to set the desired speed, and the system will then use radar and infrared beams to determine the position of the vehicle ahead, ultimately sending signals to the engine to execute braking or acceleration. Adaptive cruise control has a wide range of applications, including urban congested roads and highways. Below is a related introduction: The function of regular cruise control is to allow the driver to maintain a set speed without needing to press the accelerator pedal to adjust the speed, enabling the car to move forward at the predetermined speed. During the operation of regular cruise control, regardless of changes in road slope or wind resistance, the car's speed remains unchanged. Its main application scenarios are highways and closed roads. It is not very suitable for stop-and-go urban traffic conditions. Similarly, it is not suitable for rainy or snowy weather.
12
3
Share

What does a wrench symbol in the car light indicate?

The "small wrench" warning light reminds the owner to perform scheduled maintenance based on mileage requirements, as it's part of the maintenance reminder function setup. Relevant knowledge is as follows: 1. Concept: Car maintenance refers to the periodic preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain components of the vehicle. 2. Maintenance scope: Modern vehicle maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose: The objectives of car maintenance are to maintain vehicle cleanliness, ensure normal technical conditions, eliminate potential hazards, prevent failures, slow down deterioration processes, and extend the service life.
15
0
Share

Can You Ride a Motorcycle on the Highway?

Highway riding is permitted for motorcycles, as their speed generally exceeds 70 kilometers per hour. However, specific policies depend on local traffic regulations, as traffic conditions vary across different provinces and cities in China, requiring case-by-case analysis. Here are some precautions for highway motorcycle riding: 1. Obey traffic laws: Adhere to highway regulations, avoid speeding, and refrain from unnecessary lane changes. 2. Maintain safe distance: Motorcycles inherently have weaker braking capabilities than cars, so it's crucial to keep a safe distance from the vehicle ahead. 3. Check vehicle condition: Before entering the highway, inspect your motorcycle to ensure the braking system functions properly, tire pressure is correct, and tires maintain sufficient traction.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.