Where is the jack located for spare tire replacement on the Vision X3?

1 Answers
SanCassandra
07/25/25 8:51am
The jack for spare tire replacement on the Vision X3 is located under the front passenger seat, easily visible from the rear door. There is a black package attached to the carpet, which contains the jack tool kit. The Vision X3 is Geely's sincere effort to enter the AO-class compact SUV market. The dimensions of this vehicle are 4005mm in length, 1760mm in width, and 1575mm in height, with a wheelbase of 2480mm. The Vision X3 is equipped with a 5-speed manual transmission, and its engine delivers a maximum horsepower of 109 HP and a maximum torque of 142 Nm. The trunk capacity is 400L. In terms of active safety, the vehicle features a 39-meter braking distance from 100 km/h, independent tire pressure monitoring for all four wheels, and the Bosch 9.1 version ESP electronic stability program.
Was this review help?
14
0
Share
More Forum Discussions

Where is the USB port in the Buick GL8?

The USB port in the Buick GL8 is located inside the central storage box. Taking the 2021 Buick GL8 as an example, it is an MPV with body dimensions of 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm and a body weight of 1880kg. The 2021 Buick GL8 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237PS, a maximum torque of 350Nm, and a maximum power of 174kW, paired with a 9-speed automatic transmission.
19
2
Share

Does the Engine Compartment Get Wet During Car Washing?

Does the engine compartment get wet during car washing? The correct sequence for cleaning the engine compartment: 1. Open the engine compartment for heat dissipation until the surface is not too hot to touch. Do not rinse with cold water when the compartment is at high temperature, as sudden cooling can cause damage; 2. Seal the computer board, air intake, and other parts of the car body that do not require cleaning. Water entering the air intake can prevent the engine from starting, and water on the computer board poses a risk of short-circuiting; 3. Use professional tools such as steam cleaners for cleaning; 4. After cleaning, use an air gun and a towel to dry all parts of the engine compartment; 5. Apply a care solution to the plastic parts of the engine compartment to complete the cleaning.
6
3
Share

Where is the rearview mirror heating switch on the 2021 Emgrand?

The rearview mirror heating switch on the Emgrand is located to the left of the A/C button on the air conditioning panel. Function of rearview mirror heating: The rearview mirror heating function refers to the ability of the rearview mirror to be heated via heating wires embedded behind the mirror surface when driving in rainy, snowy, or foggy weather, ensuring clear visibility on the mirror surface. Working principle of rearview mirror heating: The working principle of electrically heated rearview mirrors is very simple and not highly costly. It involves installing a heating element (heating film) inside the mirror panels on both sides. During rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element quickly warms up to a set temperature (typically between 35-60°C) within minutes, thereby heating the mirror surface to remove fog and frost.
12
4
Share

Where is the trunk switch of BYD S6?

The trunk switch of BYD S6 is located under the driver's seat. Pull the trunk switch under the driver's seat, and then you can manually open the trunk. In addition, the trunk can also be opened with the remote control and the key. Small storage compartments of BYD S6: The small storage compartments inside the S6 are excellent, with places to store personal items almost everywhere, and the locations are obvious. The rear armrest has a good texture and can also serve as a cup holder. Storage space of BYD S6: In terms of storage space, the BYD S6 first takes advantage of its own space advantage, so there is no need to sacrifice corresponding storage space due to space limitations. Moreover, more user-friendly adjustments have been made in the details, and it can be said that everything that should be there is there.
18
5
Share

Where is the battery located for jump-starting an Audi Q5?

Audi Q5's battery is jump-started at the positive and negative terminals. Jump-starting method: First, open the engine hood of your car. There is a switch under the steering wheel. Then, locate the battery position inside the front engine compartment and identify the positive and negative terminals. Connect the red cable to the positive terminal of the dead battery first, then to the positive terminal of the rescue vehicle. Connect the negative terminal of the rescue vehicle to the negative terminal of the dead battery. After starting the rescue vehicle's engine, start the dead vehicle's engine. Remove the positive cable first, then the negative cable. Let the rescued vehicle's engine run for some time to ensure the battery gets sufficient charge. Jump-starting precautions: Jump-starting cables are used for emergencies when the vehicle cannot start. You can call a passing car for a jump-start. The method involves connecting your vehicle's battery positive terminal to another vehicle's positive terminal and the negative to negative, then starting your vehicle. This is an emergency measure.
17
4
Share

Where is the automotive urea added in the car?

Automotive urea is added into the urea storage tank located near the fuel tank of the vehicle. The impacts of not using urea in vehicles include: 1. Exceeding emission standards, causing environmental pollution; 2. Oxidation of chemicals in the automotive system, leading to clogged urea nozzles and rendering the entire system inoperable; 3. Decreased vehicle power. The functions of urea are: treating exhaust gases to reduce pollutants in the emissions, optimizing engine performance and fuel consumption. Reasons for urea warning light activation include: 1. Urea pressure too low, high urea consumption; 2. Insufficient power, urea consumption too high or too low; 3. Instrument panel malfunction. Methods to eliminate urea warning light alerts are: 1. Replace urea solution; 2. Replace water heating valve; 3. Replace urea pump and power supply module plug.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.