Where is the jack in a Mercedes-Benz?

1 Answers
KinsleyRose
07/30/25 3:09am
Mercedes-Benz's jack is located under the trunk. You can see it by removing the floor panel of the trunk. Precautions for using the jack: During operation, the oil level in the tank should always be kept on the center line of the oil gauge to prevent the oil pump from running dry. When refueling, use a 120-mesh oil filter to remove impurities from the oil. For frequent use, clean the oil filter every 2 months and the oil tank every 6 months, and replace the oil at the same time. Types of car jacks: Currently, the common types of car jacks on the market include rack jacks, screw (mechanical) jacks, hydraulic (oil) jacks, and pneumatic (inflatable) jacks. For small cars, the hydraulic type is suitable, but for large vehicles, the choice should be based on specific conditions.
Was this review help?
18
3
Share
More Forum Discussions

How to Start and Stop a Car for Beginners

Methods for beginners to start and stop a car are as follows: 1. Starting: Sit properly in the car and start the engine, press the clutch and shift to first gear, slowly release the clutch while gently pressing the accelerator, and the car will start moving once the clutch is fully released; 2. Stopping: Check the right rear-view mirror for any vehicles behind, turn on the right indicator and slowly pull over to the right side to stop. Safe driving methods: 1. Check the vehicle condition to avoid driving with potential hazards; 2. Fasten the seatbelt to enhance safety awareness; 3. Avoid fatigued driving; 4. Never drive under the influence of alcohol; 5. Pay attention to road conditions in bad weather; 6. Handle any unexpected situations on the road properly; 7. Obey traffic rules and don't rush for time.
7
1
Share

What is the wheelbase of the Jetta VS5?

The wheelbase of the Jetta VS5 is 2630mm. The dimensions of this car are 4419mm in length, 1841mm in width, and 1616mm in height, with a fuel tank capacity of 51 liters and a trunk capacity of 482 liters. This vehicle features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The Jetta VS5 is equipped with the EA211 1.4T 110kW engine, which is also used in Volkswagen and Audi models, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It is paired with an MQ250 manual transmission or an Aisin AQ250 six-speed automatic transmission, and comes with core equipment such as ESP electronic stability system and ACC adaptive cruise control.
1
3
Share

What are the body dimensions of the Fiat Viaggio?

The Fiat Viaggio has a body length, width, and height of 4679mm, 1850mm, and 1471mm respectively, with a wheelbase of 2708mm. The Viaggio is a compact model under the Fiat Automobile Company. Its safety features include driver and passenger airbags, front side airbags, seatbelt reminder, rear child seat interface, ABS anti-lock braking system, brake force distribution, brake assist, traction control, and electronic stability control. The Viaggio is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 230 Nm, with a front-wheel drive system. In terms of suspension, it uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
5
2
Share

Where is the light switch for the Volvo XC90?

The light switch for the Volvo XC90 is located on the stalk switch below the steering wheel. Turn it to the designated position, and the corresponding exterior lights will illuminate, while the dashboard will also display the corresponding indicator. The Volvo XC90 has a length, width, and height of 4953mm, 1958mm, and 1776mm respectively, with a wheelbase of 2984mm. The front suspension of the Volvo XC90 is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 250PS, a maximum power of 184kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
4
1
Share

What are the effective ways to save fuel for cars?

Effective ways to save fuel for cars include: maintaining an appropriate speed, reducing vehicle weight, ensuring proper tire pressure, minimizing brake usage, using air conditioning sparingly, avoiding unnecessary throttle presses and sudden braking, and maintaining the correct gear. Maintaining the correct gear means shifting up in time when the speed increases or the engine reaches a certain RPM. Methods to check car fuel consumption: Most onboard computers display the average fuel consumption value on the dashboard, but this often differs from the actual fuel consumption. Fuel consumption refers to the fuel economy indicator of a car driving at a constant speed on good road conditions. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted.
18
0
Share

How many kilometers should the Mazda Atenza alternator belt be replaced?

The Mazda Atenza alternator belt should be replaced every 60,000 to 80,000 kilometers. If you frequently drive on highways, it is recommended to replace it around 60,000 kilometers. The alternator belt is one of the main belts in a car, connecting components such as the alternator, air conditioning compressor, power steering pump, idler pulley, tensioner pulley, and crankshaft pulley. The power source for the alternator belt is the crankshaft pulley, with the rotation of the crankshaft providing the necessary power. Taking the 2020 Mazda Atenza as an example, its body dimensions are 4870 mm in length, 1840 mm in width, and 1445 mm in height, with a wheelbase of 2830 mm. This model is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 116 kW and a maximum torque of 202 Nm, paired with a 6-speed automatic transmission.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.