Where is the interior trunk switch for the Roewe ei6?

1 Answers
AdrianMarie
07/30/25 6:52am
The interior trunk switch for the Roewe ei6 is located below the small storage compartment on the left side of the steering wheel. As an annual facelift model, the 2019 Roewe ei6 continues the design of the 2017 model in terms of body dimensions and exterior styling, adopting the Roewe family's Rhythm design language with smooth body lines. Taking the 2019 Roewe ei6 as an example, its body dimensions are 4671mm in length, 1835mm in width, and 1460mm in height, with a wheelbase of 2715mm. In terms of power, the 2019 Roewe ei6 is equipped with a 1.5L turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 250Nm.
Was this review help?
3
4
Share
More Forum Discussions

What to Do When You Accidentally Lock Your Car Keys Inside the Car?

The solutions for accidentally locking your car keys inside the car are: 1. Use a spare key; 2. Contact a qualified and professional locksmith; 3. Call the after-sales rescue service of the 4S store; 4. Use tape to stick to the car window and forcefully pull it open; 5. Use a sharp object to remove the door seal and insert a wire through the gap to press the unlock button. The maintenance methods for car keys are: 1. Avoid frequently placing them with metal objects; 2. Do not leave the spare key in the car door; 3. Prevent the smart key from falling or being impacted; 4. Avoid exposing the smart key to high temperatures or contact with liquids; 5. Do not place the key with electronic devices.
3
0
Share

How much engine oil does the Jeep Compass 1.4T require?

The Jeep Compass 1.4T requires 4.5 liters of engine oil. Engine oil, also known as motor lubricant, serves multiple functions for the engine, including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and buffering. Taking the 2021 Jeep Compass as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4424mm in length, 1819mm in width, and 1635mm in height, with a wheelbase of 2636mm and a fuel tank capacity of 51 liters. The 2021 Jeep Compass has a maximum power output of 127kW and a maximum torque of 270Nm, paired with a 7-speed dual-clutch transmission.
5
1
Share

What causes the erratic movement of the Corolla's coolant temperature gauge?

The erratic movement of the Corolla's coolant temperature gauge is caused by poor contact in the wiring of the coolant temperature sensor. The coolant temperature gauge displays the temperature of the coolant, helping the owner understand the car's condition. The Corolla's body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm and a fuel tank capacity of 50 liters. The Corolla is equipped with a 1.2T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 85 kW and a maximum torque of 185 Nm. It features a front suspension type of MacPherson independent suspension and a rear suspension type of E-type multi-link independent suspension.
3
2
Share

Can LED headlights be used without lenses?

LED headlights can be used without lenses, but there are differences in brightness, lighting effects, and vehicle appearance between headlights with and without lenses. Lenses serve to focus the light beams. When the light shines on the road, it spreads evenly across the surface, providing optimal illumination for the vehicle. Without lenses, the light tends to scatter more, which can easily affect the vision of oncoming drivers. There are two types of lenses: single-beam and dual-beam. A single-beam lens simply means that the lens can only control one bulb, with separate high and low beams, and it only controls the low beam. A dual-beam lens, on the other hand, uses an internal shutter to control both light sources—high and low beams—allowing for seamless switching between them.
1
4
Share

How to Replace the Wiper Blades on a Sagitar?

Here is the method to replace the wiper blades on a Sagitar: 1. First, fully raise the wiper arm; 2. Adjust the angle of the wiper blade to make it as close to 90 degrees with the wiper arm as possible; 3. Once the angle is set, proceed with the removal. Use one hand to lift the rubber blade, while the other hand pulls the rubber blade horizontally. Simultaneously, press down firmly on the main bracket with another hand to separate the wiper blade from the arm. After this, the entire wiper blade can be removed. The wiper, also known as a windscreen wiper, is a device used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.
11
1
Share

Reasons for Severe Jerking During MG6 Startup

The reasons for jerking during MG6 startup include: 1. Clogged engine oil passages; 2. Dirty transmission oil clogging the oil passages; 3. Damaged transmission solenoid valve; 4. Forgetting to release the handbrake; 5. Irregular wear of the clutch; 6. Damaged solenoid valve; 7. Some engine cylinders not working; 8. Poor volatility of low-quality fuel. Solutions for jerking during car startup: 1. Check the transmission temperature and cooling system; 2. Replace the transmission oil; 3. Inspect the internal valve body of the transmission for damage and replace if necessary; 4. Check the engine valves and intake manifold for carbon buildup that needs cleaning.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.