···
Log in / Register

Where is the ignition keyhole located on the Roewe RX5?

4 Answers
Aria
07/29/25 9:42am

The ignition keyhole socket of the Roewe RX5 is hidden, located inside the position next to the driver's door handle. The Roewe RX5 is a compact SUV from SAIC Motor, featuring a 5-door, 5-seat body structure with dimensions of 4556mm in length, 1855mm in width, and 1719mm in height, and a wheelbase of 2700mm. The Roewe RX5 is equipped with a 4-cylinder 1.5T 169-horsepower turbocharged engine, paired with a 6-speed manual transmission. The suspension system consists of a MacPherson strut independent front suspension and a multi-link independent rear suspension.

Was this review help?
18
5
Share
OLondon
08/12/25 11:12am

I've been driving the Roewe RX5 for a while now, and the keyhole position is thoughtfully designed yet well-hidden. It's usually located on the lower right side of the steering wheel, near the dashboard on the driver's side. If you feel around carefully, there's a small plastic cover that you can pry open to insert the key and start the ignition. This design is mainly intended as a backup for the one-button start system—if the remote key runs out of battery or the system fails, you can manually start the car here. I remember trying to locate it a few times when the car was new, but now I'm quite familiar with it. I recommend new owners check the schematic diagram in the manual or practice finding it before driving, so they won't panic in an emergency. The location is well-chosen—it doesn’t interfere with daily operations and prevents accidental touches. In short, safe driving is crucial, so always check your car's condition regularly.

Was this review help?
6
5
Share
Expand All
StZoey
10/06/25 7:25am

As a young driver who has driven the Roewe RX5 a few times, I was initially puzzled about where the ignition keyhole was. Later, I discovered it's hidden under a discreet cover at the lower right side of the steering wheel—just flip it open, insert the key, and start the engine. The design is pretty cool; normally, the one-button start works perfectly fine, but this serves as a secure backup option. I also recommend keeping a spare key battery in the car to avoid being stranded if the battery dies. The placement is discreet yet practical, saving space while maintaining aesthetics. Over time, you’ll appreciate these thoughtful details, especially during rain or snow when key signals might weaken. In short, it’s easy to handle—just enjoy the ride.

Was this review help?
16
1
Share
Expand All
Lulu
11/20/25 2:05am

As a frequent driver, I know that the keyhole position of the Roewe RX5 is near the steering wheel base, and you just need to pry open the cover to operate. It serves as a supplement to the one-button start, ensuring that you can start the car without delay in case of a power failure. The position is easy to find yet inconspicuous, avoiding any interference with driving. It's quite important to be familiar with some daily maintenance knowledge.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

What is the difference between high-speed motors and low-speed motors?

The differences between high-speed motors and low-speed motors are as follows: 1. Different design perspectives: From a design perspective, high-speed motors have a small rotor diameter and a large length; low-speed motors have a large rotor diameter and a small length. A smaller diameter means a relatively smaller linear speed of the rotor's outer diameter, and the centrifugal force on the embedded windings during high-speed rotation is relatively small, making them suitable for high-speed operation. Here, high-speed specifically refers to tens of thousands of revolutions, while general motors operate at a few thousand revolutions, which does not reflect this design concept. 2. Different motor power: Due to the high speed, high-speed motors have a high power density, and their volume is much smaller than that of low-speed motors, effectively saving materials. 3. Different efficiency: High-speed motors are directly connected to the prime mover, eliminating the traditional speed reduction mechanism, resulting in high transmission efficiency and low noise; low-speed motors produce more noise.
9
0
Share

What Causes a Car to Stall?

Reasons for car stalling: 1. Electrical circuit failure - This may occur due to low-voltage power interruption during driving, causing the engine to stall. In this case, you should primarily check the ignition and starter switches as well as the fuse box; 2. Short circuit in low-voltage wiring causing stalling - This situation requires inspection of the low-voltage circuits; 3. Component failure - This issue is usually related to faults in the ignition coil, capacitor, or electronic ignition module; 4. Fuel system failure - Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or empty fuel tank can cause stalling, though the car may still be restarted with difficulty in such cases; 5. Ignition system failure - Problems with the engine overheating or the anti-knock system can also lead to stalling.
2
4
Share

How to Customize a License Plate Number?

License plate number customization method: 1. Enter the vehicle type, ID number, and the vehicle's VIN, then select the region; 2. Customize the license plate number in the system, which usually offers numbers and letters to choose from. After selecting a satisfactory license plate number, press confirm and proceed with other formalities. The self-service license plate customization system is installed on self-service touchscreens in the DMV service hall. The search, query, and license plate confirmation are all completed independently by the vehicle owner. Therefore, vehicle owners should follow the instructions when selecting their license plate numbers. Once the customized license plate number is confirmed by the owner, it is automatically uploaded to the DMV's vehicle registration system and cannot be changed. Vehicle owners should avoid input errors.
18
2
Share

How to reset the maintenance light on the Roewe RX3?

Method to reset the maintenance light on the Roewe RX3: 1. Turn off the ignition switch while holding down both arrow buttons simultaneously; 2. Turn on the ignition switch, and after about 3 seconds, release the two arrow buttons; 3. The reset menu will appear, asking if you want to reset—hold the SET button for more than 3 seconds; 4. Press the MODE button, then turn off the ignition switch to complete the reset. In terms of appearance, the Roewe RX3 features the brand's signature shield-shaped front grille, integrated with the headlights on both sides. The side profile boasts smooth and clean lines, with a sleek design that gives it a robust look. The dimensions of the Roewe RX3 are 4408 mm in length, 1804 mm in width, 1651 mm in height, with a wheelbase of 2625 mm.
14
2
Share

Are there cameras at highway exit ramps?

There are cameras at highway exit ramps. Here are specific details about highway ramps: 1. Introduction: Ramps are part of the highway, and reversing on highway sections is not allowed. Typically, surveillance cameras are installed at ramp entrances. If a vehicle reverses on a ramp, it will definitely be captured and subject to corresponding penalties. 2. Reversing: Stopping, making U-turns, backing up, or reversing on highways are extremely dangerous traffic behaviors. Due to the high speed, drivers have very short reaction times, making it easy to cause traffic accidents with unimaginable consequences. Highway accidents are often catastrophic, harming both oneself and others. Therefore, reversing is prohibited on highways. If discovered, the driver will have 12 points deducted from their license and may face suspension of their driving permit. 3. Precautions: When exiting the highway, drivers should pay attention to exit warning signs, change lanes in advance, and follow the instructions to enter the lane connected to the exit for deceleration. If an exit is missed, drivers must continue forward until the next exit to leave the highway. They must not reverse, drive in the opposite direction, overtake, or stop.
2
4
Share

What is the ground clearance of the Ford Mustang?

The ground clearance of the Ford Mustang is 120 millimeters. In terms of exterior design, although the side profile of the Ford Mustang still emphasizes stability, a trapezoidal indentation line runs from the front fender straight to the rear fender, showcasing the vehicle's dynamic character. The rear end also maintains a stable appearance, with vertical tail lights featuring a distinctive rectangular design. For the interior, the Ford Mustang offers optional interior color accent packages, including charcoal black leather seats with red stitching, red door panels, and red floor mats. In terms of features, the Ford Mustang comes equipped with one-touch power windows, power-adjustable mirrors, a keyless entry system, power locks, a heated rear window, and intermittent windshield wipers.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.