Where is the horn located on the Roewe 550?

1 Answers
Howard
07/28/25 10:43pm
Roewe 550's horn is located behind the front bumper. Relevant introduction about Roewe is as follows: 1. Exterior: The new Roewe 550 continues the highly praised styling design of the classic model, with further sharpened local lines. It employs more curves and softer treatments, making the overall appearance more fluid and natural, while the matte chrome plating significantly enhances visual pleasure. 2. Safety: The vehicle comes standard with iso-fix child safety seat anchors, and the VSC+TCS system has been newly upgraded. The comprehensive application of HAS hill start assist system and EPB electronic parking brake completely eliminates rollback. The second-generation all-time digital sedan Roewe 550 perfectly integrates the Start-Stop digital intelligent energy-saving system, Torrento high-efficiency intelligent engine, and TST-6-speed oil-cooled dual-clutch automatic transmission system. The application of front active safety headrests, automatic xenon headlight cleaning function, automatic headlight leveling adjustment, and LED light guide taillights all enhance road driving safety.
Was this review help?
1
1
Share
More Forum Discussions

Can You Mix Different Engine Oils in a Car?

It is not advisable to mix different engine oils in a car. The reasons why engine oils should not be mixed include reduced performance when new and old oils are mixed, and the formation of turbidity when different oils are combined. Below are the detailed explanations: Mixing new and old oils reduces performance: New and old engine oils should not be mixed. Old oil contains a large amount of oxidative substances. When new oil is mixed with old oil, the oxidation rate of the new oil increases, thereby reducing its effectiveness and service life. Tests have shown that when the old oil in a diesel engine is completely replaced with new oil, the oil's service life can reach up to 1,500 hours. However, if half of the new oil is mixed with half of the old oil, the service life of the oil is reduced to only 200 hours, significantly shortening its usability. Mixing different oils causes turbidity: Engine oils of different brands and grades should not be mixed. Since the chemical additives in oils of different brands and grades vary, these additives can sometimes react with each other, reducing lubrication effectiveness and producing acidic or alkaline compounds that accelerate the corrosion of engine components. Most modern engine oils use sulfonates as dispersant detergents, while some oils use salicylates instead. Salicylates are incompatible with the sulfonates used in other lubricants. If these two types of lubricants are mixed, phenomena such as layering, turbidity, and deterioration of cleaning ability may occur.
11
4
Share

Is a tire pressure of 2.8 normal in summer?

Summer tire pressure of 2.8 is not normal. According to the provisions and requirements of the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5bar. A pressure of 2.8bar exceeds the maximum value of the standard tire pressure, so it is not normal. Generally, the lower limit of the standard tire pressure for car tires is sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates the local wear of the tread pattern in the center of the tire, reducing the tire's lifespan; The vibration of the car body increases, indirectly affecting the lifespan of other components; It causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load the car bears while driving; Puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, and the impact can cause internal cracks and explosions, leading to a blowout.
14
2
Share

What is the principle of car steering?

The principle of car steering mainly involves the steering wheel driving the steering gear, which in turn activates the rack and pinion steering mechanism. This causes the front tie rod to swing left and right, changing the angle of the front wheels to achieve the steering effect. The car steering system is used to maintain or change the direction of the vehicle's movement, whether moving forward or backward. The car steering system is crucial for driving safety, which is why its components are referred to as safety-critical parts. Both the steering system and the braking system are essential safety systems that must be given high priority in vehicles. Structure of car steering mechanisms: In terms of widespread usage, there are four main types of steering mechanisms: worm and peg type (WP), worm and roller type (WR), recirculating ball type (BS), and rack and pinion type (RP). These four types of steering mechanisms have been widely used in automobiles. Among them, the recirculating ball steering mechanism and the rack and pinion steering mechanism have become the two primary steering systems in modern vehicles worldwide. Meanwhile, the worm-type steering mechanisms are gradually being phased out or retaining a minor role. Due to its various advantages, the rack and pinion steering mechanism has seen rapid development in small vehicles (including passenger cars, light trucks, and multi-purpose vehicles). On the other hand, larger vehicles primarily use the recirculating ball steering mechanism as their main structure.
18
4
Share

What is the heating symbol for a sedan?

The heating symbol in a car is typically a rotary knob. To increase the interior temperature, turn on the air conditioning and rotate the knob to the red zone. The heating switch symbol usually has red and blue markings on both sides, with the cold air setting on the left and the heating setting on the right. Turning the knob to the left lowers the car's temperature, while turning it to the right raises it. Some models also feature an automatic air conditioning system; pressing the AUTO button will allow the system to adjust the temperature automatically based on the interior conditions. Before turning on the heating, it's necessary to wait for the engine coolant temperature to rise. When the car is cold-started, the coolant temperature is at 0 degrees. Only after driving for some time will the temperature noticeably increase. Once the coolant temperature reaches around 90 degrees, the car's heating system will become effective. It's important to note that the A/C button should be turned off when using the heating. This is because the heating system utilizes the heat generated by the engine. Activating the air conditioning compressor can reduce the heating efficiency and increase fuel consumption. Driving with the heating on can lead to fatigue. It's advisable to adjust the air vents to avoid blowing directly at the head for extended periods, as this can cause drowsiness and affect driving safety. Periodically opening the windows to allow fresh air circulation is also recommended to maintain a comfortable and safe driving environment.
1
2
Share

How many points are deducted for driving or parking in violation of regulations?

When driving through an intersection without following the prescribed driving or parking rules, 2 points will be deducted. Below is a detailed introduction about vehicle violations: 1. Overview: Vehicle violations refer to motor vehicles violating the Road Traffic Safety Law and traffic management regulations. Penalties for vehicle violations include warnings, fines (vehicle impoundment), temporary suspension of driver's license, revocation of driver's license, cancellation of driver's license, administrative detention, and criminal liability for acts constituting a crime. 2. Basis for Penalties: According to the 'Road Traffic Safety Law of the People's Republic of China,' public security traffic management departments and their traffic police should promptly correct road traffic safety violations. Penalties for road traffic safety violations should be imposed based on facts and relevant provisions of this law.
19
3
Share

How Many Centimeters Should You Park from the Curb?

Parking within 30 centimeters from the curb is a requirement in the Subject 2 driving test, and the Subject 3 test also requires parking within 30 cm from the curb. Exceeding 30 cm will result in point deductions. For daily parking, it is also advisable to maintain a distance of no more than 30 cm from the curb. Article 56 of the 'Road Traffic Safety Law of the People's Republic of China' stipulates that motor vehicles shall be parked in designated areas. Parking on sidewalks is prohibited, except in parking spaces marked according to this law. When parking a motor vehicle on the roadside, the correct method for choosing a parking spot is as follows: When parking a motor vehicle, it must be parked in designated areas. If parking on the roadside is necessary, choose to park within marked parking spaces. When temporarily parking on the road, do not obstruct the passage of other vehicles and pedestrians. On roads without marked parking spaces, park as close as possible to the right side of the road, in the direction of traffic, with the vehicle body no more than 30 cm from the road edge. The driver must not leave the vehicle and must depart immediately after passengers alight or items are loaded/unloaded. In case of vehicle breakdown or an accident where the vehicle is difficult to move, turn on the hazard warning lights. At night, additionally turn on the hazard warning lights, position lights, and rear lights.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.