Where is the horn located on the Baojun 310?

How to Maintain the Roewe i5?

Roewe i5 is maintained at local 4S stores. Below is an introduction to the Roewe i5: Introduction: The Roewe i5 is a high-performance internet-connected mid-size sedan under the Roewe brand. Development History: On June 26, 2019, the Roewe i5 Linghao version was launched. On September 26, 2019, the upgraded Roewe i5 Linghao series was released. In March 2021, SAIC Roewe first revealed the exterior and official interior images of the fourth-generation premium family sedan, the all-new Roewe i5. On April 7, 2021, SAIC Roewe officially announced the pre-sale price of its new compact sedan—the new i5, which comes in 4 configuration variants.

9

2

Share

Where is the fuse for the Nissan Livina horn located?

The fuse for the Livina horn is located in the fuse box under the hood. Precautions for using the car horn: Avoid getting wet: When washing the car in winter, be sure to prevent the horn from getting wet. If water enters the horn, dry it with an air gun as soon as possible. Avoid prolonged pressing: Try not to press the horn for extended periods frequently, as this can cause premature burning of the horn contacts, leading to increased resistance. This weakens the current flowing through the electromagnetic coil, reducing the electromagnetic force, which may fail to attract the armature to drive the diaphragm for normal vibration, resulting in a hoarse sound or even no sound at all. Avoid frequent replacement: If the horn malfunctions, seek help from a professional repair technician instead of blindly replacing the horn, which can lead to unnecessary waste.

19

3

Share

What is the minimum ground clearance of the 4008?

The minimum ground clearance of the Peugeot 4008 is 170mm. Here are the relevant details: 1. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the road surface when the car is fully loaded. 2. The design of the minimum ground clearance must consider the passability when loading and unloading on transport platforms, as well as the possibility of avoiding scraping when the car is near the edge of a sidewalk. 3. The smaller the ground clearance, the poorer the ability to overcome obstacles. Sedans generally travel on flat urban roads, hence the smaller ground clearance. Off-road vehicles have a larger minimum ground clearance to allow for overcoming larger obstacles. A larger minimum ground clearance enhances the vehicle's ability to pass over obstacles or uneven terrain, but raises the center of gravity, reducing stability. Conversely, a smaller minimum ground clearance weakens the vehicle's ability to pass over obstacles or uneven terrain, but lowers the center of gravity, increasing stability.

14

1

Share

Where is the maintenance reset button for the 2020 Bora?

2020 Bora maintenance reset button is located below the instrument panel. Here are the specific details about the Bora: Power system: The entire lineup is equipped with Volkswagen Group's latest generation EA211 series all-aluminum engines, offering two power options: 1.5L and 1.4TSI, paired with a 5-speed manual transmission, 6-speed Tiptronic automatic transmission, or 7-speed DSG dual-clutch automatic transmission. This enhances power performance while reducing fuel consumption, achieving energy efficiency and environmental protection, meeting Euro 5 emission standards. Configuration: The Bora features a cruise control system, standard EPB electronic parking brake and Auto-hold automatic parking function across the lineup, and is equipped with a multi-function electric seat that provides 6-way electric adjustment. The luxury model also includes seat heating function.

13

5

Share

How to Reset the Maintenance Reminder on a Skoda Octavia?

Method to reset the maintenance reminder on a Skoda Octavia: 1. Turn off the ignition switch. 2. Press and hold the "0.0/SET" (reset/set) button on the instrument panel. 3. Turn on the ignition switch while keeping the "0.0/SET" (reset/set) button pressed with your left hand. 4. The instrument panel display will show "Confirm to reset the maintenance service data?" and "Confirm to reset the vehicle condition inspection service data?". 5. Release the "0.0/SET" (reset/set) button. 6. Press the "0.0/SET" (reset/set) button again to confirm. (Press once only) 7. Check if the maintenance light has been reset to zero; if not, you must start over from the beginning.

16

5

Share

What do the three wires of the Mazda 3 fan represent?

CPU fan's red, black, and yellow (or green, etc.) wires generally represent: red is the positive power supply for the fan, black is the negative power supply, following the "red positive, black negative" rule. The additional colored wire is the fan speed detection control line, which adjusts the fan speed according to CPU temperature to achieve optimal cooling. Below is extended content: The main performance of a fan is reflected in the following aspects: speed, fan blade shape, fan blade angle, and bearing system. Typically, the fan speed is specified in the radiator's manual. The radiator's cooling effect is 30% dependent on the fan speed. However, higher fan speed is not always better. The correct fan speed should be determined based on the heat generated by the CPU, and different specifications of fan speeds should be selected accordingly. The basic principle is: under the premise of generating the same air volume, the higher the fan speed, the lower the noise. Generally, speeds between 3500 and 5200 are considered conventional.

10

2

Share

Where is the horn located on the Baojun 310?

How to Maintain the Roewe i5?

Where is the fuse for the Nissan Livina horn located?

What is the minimum ground clearance of the 4008?

Where is the maintenance reset button for the 2020 Bora?

How to Reset the Maintenance Reminder on a Skoda Octavia?

What do the three wires of the Mazda 3 fan represent?

What is the gear usage instruction for the Prado?

How does the tire pressure monitoring system work in Volkswagen vehicles?

Is it okay for the engine compartment to be hot in summer?

Where to Check Hino Engine Model?