Where is the hood switch for the Volvo S60?

4 Answers
VanGabriel
07/28/25 4:38pm
First, open the driver's side door of the Volvo S60. Generally, there is a marked pattern either near the left leg area or on the door. Pull up the handbrake of the Volvo S60 to prevent the car from rolling. Pull the hood release switch located on the left side of the driver's leg area in the Volvo S60. Reach inside to feel for a safety latch mechanism, flip it, and the hood will open. Lift the engine hood of the Volvo S60 upward. Use the support rod to prop up the hood of the Volvo S60, ensuring it is securely supported.
Was this review help?
2
2
Share
VanDerek
08/11/25 8:51pm
I remember looking for the hood release lever in the Volvo S60—it's usually tucked away near the floor on the driver's side. Bend down and feel around the foot pedal area to locate a small yellow or black lever; pull it, and you'll hear a distinct 'click' indicating the hood is unlatched. But that's just step one. You'll then need to exit the car, walk to the front, and feel under the leading edge of the hood for a hidden secondary latch. Gently push or pull this to fully release the hood. For first-timers, I'd recommend practicing a few times to memorize the locations—it saves fumbling in emergencies. Also, regularly clean the latch mechanism to prevent jamming, and inspect components under the hood periodically to catch minor issues (like oil leaks or battery aging) before they escalate.
Was this review help?
20
2
Share
Expand All
StJack
08/11/25 8:52pm
When I drove the S60, I found the hood release quite hidden—it's located near the driver's lower leg area, on the side closest to the door, with a small lever. Pulling it slightly pops the hood open. Then, you must step out to handle the secondary release mechanism under the front of the car, which is just a plastic latch that needs a press. The whole process feels like a treasure hunt, which is quite fun. But if you can't find it the first time, don't worry—recall if the salesperson demonstrated it during purchase or check the user manual for its location. For safety, always ensure the hood release operates smoothly before driving to prevent any mishaps.
Was this review help?
11
0
Share
Expand All
McSimon
09/29/25 7:27am
I understand that the hood release lever of the S60 is located in an easily overlooked corner on the left front side of the driver's footwell. It features a fixed lever that's simple to operate—just pull it to unlock the hood, then exit the vehicle to manually lift it. This two-step design prioritizes safety by preventing accidental opening while driving. After operation, remember to check if the lever rebounds smoothly to avoid jamming, which could affect the switch's lifespan. The entire process should feel intuitive once you're familiar with it.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

What kind of oil should be added to the transfer case?

The transfer case should be filled with ATF (Automatic Transmission Fluid). Below is relevant information about transfer cases: 1. Judging from the gear lever of the transfer case, it more closely resembles a traditional part-time four-wheel drive system. The difference is that it is equipped with a center differential. When 4H is engaged, it can not only drive at high speeds on gravel roads but also achieve the function of four-wheel drive on regular highways. The 4HLC and 4LLC options it provides are four-wheel drive modes with the center differential lock engaged. At this point, its functions are the same as the 4H and 4L of a part-time four-wheel drive system. 2. The transfer case is a device that distributes the engine's power, directing it to the rear axle or simultaneously to both the front and rear axles.
4
0
Share

Where is the auxiliary fuel tank switch of the Land Cruiser?

The auxiliary fuel tank switch of the Land Cruiser is located at the lower left side of the driver's dashboard. The specific introduction of the Toyota Land Cruiser is as follows: 1. Vehicle positioning: The Toyota Land Cruiser is an imported ORV off-road vehicle produced by Toyota, featuring four-wheel drive with a wheelbase of 2850 mm. 2. Configuration: The Land Cruiser is equipped with the Crawl-Control low-speed cruise driving assistance system, KDSS kinetic dynamic suspension system, HAC hill-start assist control system, and VVT-i system. Additionally, the LAND-CRUISER 200 Land Cruiser adds a 4.0L model based on the original 4.7L model.
16
3
Share

Where is the Excelle anti-theft control box located?

The Buick Excelle anti-theft control box is located at the lower left corner of the steering wheel. The key induction coil on the steering column is the anti-theft module. Introduction to car anti-theft devices: Car anti-theft devices are high-tech security products that integrate GSM network digital mobile communication technology and GPS satellite positioning technology. They represent a new generation of vehicle security products following one-way and two-way anti-theft devices. Functions of car anti-theft devices: By utilizing mobile communication networks, they completely solve the distance limitations and vulnerability issues that conventional anti-theft devices cannot address. In addition to standard anti-theft functions, they also feature mobile phone control, SMS positioning, remote monitoring, remote alarm, and full voice prompt operation capabilities.
10
3
Share

What does a vehicle's first-level maintenance include?

Vehicle first-level maintenance refers to the most basic routine inspection and maintenance of a car. It primarily involves tasks such as changing the engine oil and coolant, checking the tires, water pump, and power steering pump tightness, with the goal of eliminating potential safety hazards and maintaining the vehicle's various performance aspects. The main items of a vehicle's first-level maintenance include the following: 1. Changing the engine oil, oil filter, fuel filter, and air filter. Typically, engine oil should be changed every 5,000 KM, and the fuel filter should be changed every 20,000 KM. 2. Checking whether the coolant level meets the specified requirements. Generally, the coolant should be replaced every two years. 3. Checking the brake and clutch fluid levels. Typically, the brake and clutch fluids should be replaced every 30,000 km or every two years. 4. Checking whether the power steering fluid reservoir level meets the specified requirements and inspecting all system oil pipe connections for leaks. 5. Checking the battery fluid level and windshield washer fluid level. If the levels are too low or insufficient, they should be topped up or replaced. 6. Checking the tension and condition of the generator, air conditioning, water pump, and power steering pump belts for signs of aging. If any abnormalities are found, they should be replaced promptly. 7. Checking whether all front and rear lights are functional (including headlights, width marker lights, turn signals, brake lights, reverse lights, and fog lights) and ensuring their brightness and beam angles meet standards. 8. Checking the tire pressure and wear condition, tightening the tire bolts to the specified torque, inflating the tires to the manufacturer-recommended pressure, and rotating the tires based on wear patterns.
3
3
Share

What is the reason for the sudden stop of the Excelle wiper?

There are two main reasons why the Excelle wiper suddenly stops working: 1. Fuse blown: The wiper may stop working because the fuse (which prevents circuit overload) has blown, causing the wiper to malfunction. In this case, you need to open the fuse box and check whether the corresponding fuse (refer to the manual on the cover) is blown. 2. Motor burned out: The probability of the motor burning out is actually very low, but it could also be due to quality control issues. Turn the car's ignition switch to the power-on position, then open the front hood and activate the wiper. If it's not broken, you should hear the sound of the motor running, and the sound is quite noticeable.
5
1
Share

Where is the starter located on the Buick Excelle?

Buick Excelle's starter is located under the hood, inside the engine compartment, at the middle position of the small coolant tank in the lower left part of the engine. Below is more information about automobile starters: 1. Function: The starter converts the battery's electrical energy into mechanical energy to drive the engine flywheel rotation for engine starting. Before operating under its own power, the engine must rely on external force for rotation. The process where the engine transitions from a stationary state to self-sustained operation with external assistance is called engine starting. 2. Working Principle: Its operating principle is based on the energy conversion process involving Ampere's Law as taught in junior high physics, where a current-carrying conductor experiences force in a magnetic field. The motor includes essential components such as armature, commutator, magnetic poles, brushes, bearings, and housing.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.