Where is the Hongqi H5 produced?

1 Answers
MacElliana
07/29/25 10:08pm
The Hongqi H5 is produced at the FAW factory in Changchun. Below are the relevant details: 1. Interior: The car features a three-spoke flat-bottom steering wheel and a floating LCD display. The control area near the gear lever is equipped with a relatively rare virtual screen to replace the cluttered physical buttons, and it is decorated with black lacquer. The door panels and center console armrest are wrapped in genuine leather. 2. Features: In addition to common configurations such as electric memory seats, multifunction steering wheel, large-size LCD screen, one-key start, electronic handbrake, auto hold, automatic parking, and electric trunk lid, the Hongqi H5 also comes with voice control and an APP remote control system. For driving safety, the Hongqi H5 is equipped with a blind-spot monitoring system, ACC adaptive cruise control, active braking system, and intelligent headlight control system. 3. The Hongqi H5 is powered by a 1.8T turbocharged engine with automatic start-stop function, paired with a 6-speed automatic transmission, delivering a maximum power of 132kW and a peak torque of 250Nm.
Was this review help?
7
1
Share
More Forum Discussions

At what level of tire aging should they be replaced?

Tires should be replaced when they reach the following conditions: 1. The tread is flush with the wear indicator; 2. Cracks appear due to aging; 3. The cords inside the tire break, causing bulges; 4. Frequent tire repairs. The functions of tires are: 1. To directly contact the road surface and work with the vehicle's suspension to absorb shocks during driving; 2. To ensure good ride comfort and smooth driving; 3. To maintain good adhesion between the wheels and the road, improving traction, braking, and off-road capability; 4. To bear the weight of the vehicle. Methods for tire maintenance include: 1. Regularly removing debris from the tread grooves; 2. Periodically checking tire pressure; 3. Inspecting tire wear and replacing them in a timely manner.
9
3
Share

What is the replacement cycle for coolant in the new Lavida?

The replacement cycle for coolant in the new Lavida is 2 years or 40,000 kilometers. Coolant is a special additive-containing liquid primarily used in liquid-cooled engine cooling systems, offering excellent properties such as freeze protection in winter, boil-over prevention in summer, and year-round anti-scaling and anti-corrosion. Different brands of coolant use varying metal corrosion inhibitors, so it is advisable to use the same brand of coolant. The Lavida is an A-class car launched by Shanghai Volkswagen, with dimensions of 4605mm in length, 1765mm in width, and 1460mm in height, and a wheelbase of 2610mm. The car's onboard navigation system combines touch screen and rotary knob controls, and includes MP3 playback capability, supporting USB, AUX, and SD card expansion slots.
17
0
Share

Where is the starter motor located on the BYD F3?

BYD F3 starter motor is located at the lower right rear of the engine. As a crucial component of the generator, the starter motor generally doesn't malfunction easily. However, to ensure long-term use, it's important to pay attention to starter maintenance during daily operation. The BYD F3 is an A+ class passenger vehicle under BYD Auto. In terms of power, the 1.5L BYD F3 delivers maximum power of 97KW at 5,800 rpm, with peak torque of 144NM at 4,800 rpm. Regarding body dimensions, the BYD F3 measures 4,533mm in length, 1,705mm in width, and 1,490mm in height.
17
5
Share

What kind of engine oil should be used for Volvo S60?

Volvo S60's original factory oil uses Castrol 0W20 or 0W30. For later maintenance, fully synthetic oil is the best choice. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperature conditions. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W represents the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Volvo S60 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until the flow stops completely. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to ensure the engine oil level is within the standard range.
12
5
Share

Does the RX5 have headlight cleaning function?

RX5 does not have a headlight cleaning function, as the entire series of this vehicle is not equipped with devices for cleaning headlights. Headlight cleaning refers to a water outlet located below the headlights, which can be used to clean dust and dirt from the headlights at any time. During nighttime or low-light driving, rain and dust can severely affect the driver's visibility, and the headlight cleaning device provides a simple and effective solution to this problem. The RX5 is an internet SUV under SAIC Roewe, with dimensions of 4545mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2700mm. The vehicle's Internet Car Intelligent System 2.0 allows the car and passengers to operate some in-car functions via voice commands, including the sunroof, navigation, air conditioning, etc.
14
5
Share

What is the ground clearance of the Buick Verano?

The ground clearance of the Buick Verano is approximately 13cm, which is relatively low among vehicles. Therefore, drivers should try to avoid rough roads to prevent damage to the vehicle. The car chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the power from the engine to make the car move and ensuring normal driving. The Buick Verano is equipped with a 1.0T turbocharged engine based on a small engine architecture, with a maximum power of 85kw and a maximum torque of 170nm.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.