Where is the Honda CR-V trunk switch located?

2 Answers
SarahLynn
07/28/25 9:33pm
The Honda CR-V trunk switch is located on the left side of the driver's compartment, and there is also a switch on the electric tailgate. Below is some relevant information about the Honda CR-V: 1. Exterior: The new CR-V Plug-in Hybrid version further combines Honda's advanced driving performance, intelligent quality, dynamic design, and cutting-edge technology. The exterior of the new car has been upgraded and comes in four body colors: Starry Night Blue, Crystal Black, Crystal White, and Elegant Gold. The CR-V Sharp Hybrid e+ features blackened headlights connected by a horizontal chrome strip, creating a strong sense of layering. 2. Powertrain: Hybrid Mode: When strong acceleration is needed, the engine power is used for generating electricity, working together with the battery to drive the motor, producing powerful performance. This enables instant acceleration while achieving seamless and smooth power delivery.
Was this review help?
5
3
Share
SanThomas
08/12/25 2:11am
I often drive a Honda CR-V for trips, and the trunk switch is mainly located in two places: there's a square button on the remote key fob, pressing it unlocks the trunk door; inside the car, it's usually located on the door panel to the left of the driver's seat or near the center console, indicated by a small car icon. I find this design quite practical, especially when you're carrying heavy items—no need to walk around to the back of the car to open it, just press the button. If the signal is weak or the key fob battery is dead, the switch might not work, and you'll have to go to the rear of the car to use the manual lever to open it. I remember once parking at a shopping center with lots of items—pressing the key button unlocked it instantly, saving a lot of time. I recommend car owners regularly check the remote battery status to avoid unexpected issues.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

How to Adjust the Rearview Mirror on a BMW 5 Series?

To adjust the rearview mirror on a BMW 5 Series, simply toggle the mirror adjustment switch to the left or right. Taking the 2021 BMW 525li as an example, it is a mid-to-large-sized 4-door 5-seater sedan with the following dimensions: length 5106mm, width 1868mm, height 1500mm, and a wheelbase of 3105mm. The 2021 BMW 525li is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 Nm. It features a rear-wheel-drive layout, with a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
8
4
Share

Under What Conditions Should Spark Plugs Be Replaced?

Spark plugs should be replaced under the following conditions: 1. After driving 40,000 to 60,000 kilometers; 2. Abnormal engine shaking during acceleration; 3. Vehicle idling with noticeable vibration; 4. Difficulty starting the engine; 5. Sudden engine stalling. The procedure for replacing spark plugs is: 1. Turn off the engine and remove the spark plug cap; 2. Unscrew the old spark plug counterclockwise; 3. Screw in the new spark plug clockwise; 4. Reattach the spark plug cap; 5. Verify proper installation and test start the engine. Causes of spark plug damage include: 1. Insufficient spark energy during ignition; 2. High air-fuel ratio in the fuel mixture; 3. Engine overheating; 4. Excessively dirty air filter; 5. Excessively high idle speed; 6. Severe carbon buildup and use of low-quality gasoline; 7. Damaged valve oil seals or crankcase ventilation valve failure.
17
0
Share

Which generation does the 2019 Golf belong to?

2019 Golf belongs to the 7th generation. The 2019 Golf is a compact 5-door, 5-seat hatchback with body dimensions of 4259mm in length, 1799mm in width, and 1452mm in height, a wheelbase of 2637mm, and a fuel tank capacity of 50 liters. The 2019 Golf is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 81 kW and a maximum torque of 155 N·m. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using torsion beam non-independent suspension.
9
1
Share

What to Do If You Forget to Close the Sunroof and It Rains Inside?

The methods to handle water entering the car due to forgetting to close the sunroof in the rain are: 1. Open the car doors to drain most of the accumulated water; 2. Park the car under the sun to dry it out; 3. Use dry towels or newspapers to wipe the damp areas; 4. Take out the car mats and seat covers to dry them outside. The maintenance methods for the sunroof include: 1. Clean the sunroof drainage channel promptly and regularly wipe the sunroof rails with a wet sponge; 2. Apply silicone oil to the sunroof sealing strips after washing the car to effectively prevent the rubber strips from aging. The functions of the sunroof are: 1. Effectively ventilate the car interior and allow fresh air to enter; 2. Meet the needs for a broader view and the requirements of mobile photography and videography.
17
4
Share

How Long After a Hot Engine Stops Can You Add Coolant?

Typically, you can add coolant half an hour after the engine has stopped to prevent damage to engine components caused by adding coolant when the engine temperature is too high. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipes, with a focus on the five-way hose. Coolant is distributed to different parts of the car through the five-way hose to function. If there is any leakage of coolant in this part, replace the hose or re-secure the connection as needed. Drain the old coolant, then flush the fluid channels with clean water. Add clean water to the coolant reservoir, then continue to pour water into the reservoir to allow it to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will have a faint pink color. Continue adding clean water until the water coming out is clear. Note: Don’t forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add new coolant through the radiator hose. Then, add another container of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as some air is expelled from the cooling system. Add more coolant until it reaches the maximum mark "MAXT" on the reservoir.
14
2
Share

What is the function of a strut bar?

The functions of a strut bar are: 1. Enhancing the rigidity of the engine compartment and the front part of the body; 2. Reducing the deformation of the frame caused by lateral torque during steering; 3. Decreasing the roll amplitude of the vehicle chassis; 4. Improving the cornering performance of the vehicle. A strut bar is a connecting rod at the top of the front shock absorber and is a commonly used stabilizer bar in car modifications. The classifications of strut bars include: 1. Front lower arm stabilizer bar; 2. Toe-in stabilizer bar; 3. Front shock absorber tower top stabilizer bar; 4. Front crossmember stabilizer bar; 5. Rear shock absorber tower top stabilizer bar; 6. Rear suspension reinforcement stabilizer bar; 7. Chassis reinforcement stabilizer bar.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.