···
Log in / Register

Where is the highest point of the left wiper?

4 Answers
LaGianna
07/30/25 2:57am

The highest point is at the far right of the front windshield. Below is relevant information: 1. Wiper function: Wipers are devices used to scrape off raindrops and dust attached to the vehicle's windshield, improving driver visibility and enhancing driving safety. 2. Maintenance: To ensure good visibility, wipers typically need replacement every six months to a year. However, some high-quality brands can last longer, such as Bosch's Aerotwin frameless series from its Belgian factory or Nippon Wiper Blade's framed series from its Japanese factory. 3. Types: There are roughly two types of wipers - traditional intermittent wipers and rain-sensing wipers.

Was this review help?
20
0
Share
AlyssaDella
08/16/25 9:19am

I often drive, and the highest point of the left wiper is usually near the upper right corner of the windshield, which is the topmost position when it swings. Cars are designed this way to allow rainwater to flow more smoothly from the driver's side, preventing blocked visibility. If you drive a sedan or SUV, the position is similar; but trucks may have it higher due to their taller bodies. During routine maintenance, I always remind my friends to clean the wiper blades regularly to avoid debris getting stuck and causing the highest point to shift, which could affect performance in the rain. Good wipers should swing smoothly to ensure clear and safe visibility.

Was this review help?
17
2
Share
Expand All
LaErin
10/22/25 2:29am

As a car enthusiast, the highest point of the left wiper mainly appears at the top right of the windshield during operation. I've noticed this is related to vehicle design, aiming to cover a larger sweeping area. Different types of cars may have slight adjustments in position: economy cars tend to position it more towards the center, while luxury cars optimize corner details. During routine car checks, I always pay attention to whether the highest point is normal; incorrect positioning can easily cause abnormal noises or water residue, affecting visibility in rainy conditions. It's important to promptly replace aging wiper blades to maintain windshield cleanliness.

Was this review help?
11
4
Share
Expand All
DiBenjamin
12/05/25 2:52am

I've studied car structures, and the highest point of the left wiper is typically located on the right side area of the windshield top. This is designed by engineers to balance driver visibility and safety, ensuring maximum rainwater clearance when the wiper reaches its peak. Modern vehicle models all use optimized curved trajectories to minimize blind spots. I've driven cars of different brands, and the positions are basically consistent; however, it's also influenced by the wiper arm and installation angle, so regular checks of spring tension are necessary during maintenance.

Was this review help?
16
1
Share
Expand All
More Forum Discussions

How Long Can the Original License Plate Be Retained After Vehicle Transfer?

According to legal regulations, vehicles can apply for transfer procedures, but license plates cannot be transferred. When transferring a vehicle, the vehicle management office will confiscate the license plate, and the transferee can only apply for a new vehicle license plate. If the original owner has held the vehicle for more than 3 years, they can apply to retain the license plate for six months when transferring the vehicle. During this period, the original owner can purchase a new vehicle and apply to use the previous license plate number. "Regulations on the Registration of Motor Vehicles": Article 18: When the ownership of a registered motor vehicle is transferred, the current owner shall apply for transfer registration with the vehicle management office at the place of registration within 30 days from the date of delivery of the motor vehicle. Before applying for transfer registration, the owner of the motor vehicle shall complete the handling of any road traffic safety violations and traffic accidents involving the vehicle. After the vehicle is transferred, if you want to keep the original license plate, you should quickly go to the relevant department to use the license plate number on your newly purchased vehicle. Only in this way can you continue to use the original license plate; otherwise, it will be automatically invalidated. "Regulations on the Registration of Motor Vehicles" Article 52: After completing the transfer registration or deregistration of a motor vehicle, the original owner can apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The documents required by the original owner for the transfer of a used vehicle include: the registration certificate, driving license, and ID card. The buyer needs to provide an ID card, and if they are from another region, they need a residence permit or temporary residence permit. Vehicle transfer first requires a vehicle evaluation. The evaluation fee is generally 1%-2% of the evaluated vehicle price, and other fees include the license plate, driving license, etc. The original vehicle's commercial insurance can be canceled (compulsory insurance cannot be canceled), or the insurance can be transferred to the buyer at the insurance company. Precautions for purchasing used vehicles: Incomplete procedures. Complete procedures for a used vehicle include: the vehicle registration certificate (or original purchase invoice), driving license, vehicle purchase tax payment certificate, road maintenance fee procedures, and compulsory insurance. If the vehicle registration certificate or driving license is missing, or if there are arrears in compulsory insurance or road maintenance fees, it will bring endless trouble to the buyer. Therefore, when purchasing a vehicle, if the seller cannot provide complete procedures, consumers should be particularly vigilant. Tampering with the odometer. Most consumers like to judge the condition of a vehicle by the odometer, and sellers often take advantage of this psychology by tampering with the odometer. In fact, the odometer is not only a record of usage intensity but also a recorder for the maintenance and replacement of other vehicle parts. If buyers perform maintenance based on the tampered odometer display, it will bring a series of potential safety hazards. New paint covering "external injuries." When consumers choose a used vehicle, if the vehicle has been repainted and there are signs of repair around the front face, rear, and A, B, and C pillars, the vehicle may have been involved in a major traffic accident. "Tuning the heart" to raise the price. Many consumers often focus too much on the "heart" of the car when buying a vehicle and neglect the health of the car body. Used vehicle sellers take advantage of this psychology by replacing engine parts to make the vehicle's "heart" appear younger, thereby raising the price.
20
2
Share

Can Gas Cylinders Be Placed in a Sedan?

Gas cylinders should not be placed in a sedan, primarily for the following reasons: Vehicle shaking and collisions pose risks: Placing gas cylinders in the car is dangerous because the cylinder walls are thin. Friction, collisions, or sudden starts can easily cause explosions. Enclosed space increases hazards: The confined interior of the car, combined with high temperatures, makes it prone to dangers such as flammability and explosions. Gas cylinders are hazardous materials: Due to their inherent safety risks, gas cylinders should be transported using special-purpose vehicles with designated routes and speed limits. Violation of laws and regulations: Unauthorized transportation of gas cylinders may result in fines for minor offenses or criminal liability for severe cases.
17
1
Share

What unit is the car tire pressure of 2.5?

The unit for tire pressure of 2.5 is bar, which converts to 2500kpa. The impact of tire pressure: The relationship between tire pressure and vehicle handling stability: Cornering stiffness is an important parameter that determines vehicle handling stability. Tires should have high cornering stiffness to ensure good handling stability. The relationship between tire pressure and power circulation: Power circulation refers to the phenomenon of tire dragging and slipping caused by different rolling radii of tires on different axles of the vehicle, resulting in power loss. Tire pressure affects tire deformation, and the degree of tire deformation influences the rolling radius, thereby affecting the travel speed. For two-axle vehicles, tire pressure must be selected based on the front and rear axle loads to ensure tires have the same rolling radius and avoid power circulation.
8
4
Share

What is the purpose of the antenna on the roof of a car?

The antenna on the roof of a car plays a crucial role in the vehicle's operation and safety. The functions of the roof antenna are as follows: Enhancing signal reception: Especially in remote areas, the roof antenna significantly improves signal reception. Adding an antenna to the roof enhances communication signals inside the car, ensuring more stable use of the radio or other communication functions. Releasing static electricity from the car body: Static electricity can easily build up on a car. If not released in time, it may cause the car to catch fire or pose a threat to gas station safety. Modern shark fin antennas have been improved to address this issue, automatically releasing static electricity from the car body without requiring any action from the driver, making it safer and more convenient to use.
6
0
Share

What Causes Engine Shaking During Vehicle Startup?

Engine shaking during vehicle startup is mostly caused by internal issues. The reasons for engine shaking during startup are as follows: Severe Engine Carbon Deposits: Dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. Unstable Fuel Pressure: Abnormal fuel supply pressure or issues with sensors like the intake pressure sensor. If the fuel pump's supply pressure is abnormal or the intake pressure sensor's values are incorrect or malfunctioning, it can cause engine shaking. Ignition System Problems: Poor performance of spark plugs, high-voltage wires, and ignition coils. Issues with the ignition system or malfunctioning spark plugs can also lead to engine shaking.
4
0
Share

How to reset the wrench light on Landwind X7?

The method to reset the wrench light on Landwind X7 is as follows: 1. Briefly press the button on the wiper stalk to bring up the trip meter interface. 2. Long press the same button until "X000" appears to reset it. More information about Landwind X7: 1. The interior of Landwind X7 features considerable original design, with a three-color scheme for the dashboard that creates a strong sense of layering, along with a large LCD screen. 2. Landwind X7 is equipped with features such as engine start-stop button, snow driving mode, sport mode, front radar, electronic parking brake, automatic air conditioning, Bluetooth phone, and navigation system.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.