Where is the high-pressure fuel pump located?

How Many Years Can a Pure Electric Vehicle Battery Last?

The battery can last for about 6-8 years without issues. Here is some relevant information about the battery: 1. Battery: The battery, also known as a storage battery, is a device that converts chemical energy into electrical energy. It refers to a lead-acid battery, which is primarily made of lead and its oxides, with sulfuric acid solution as the electrolyte. The normal lifespan of a car battery ranges from 1 to 8 years, depending largely on the vehicle's usage. 2. Battery Replacement: If the battery is dead, it is recommended to first measure the battery voltage. If using a multimeter, measure the battery voltage during engine cranking. You can initially use a high-frequency discharger or a battery tester to measure it. Under a load current of no less than 110 amps, the minimum voltage should not be lower than 9.6 volts and should remain stable for 5 seconds. If the voltage is below 9.6 volts but can remain stable for 5 seconds, it indicates over-discharge, and the battery should be recharged promptly. If the voltage is below 9.6 volts and cannot remain stable within 5 seconds, dropping rapidly to 0 volts or close to 0 volts, it suggests a battery fault, and replacement may be necessary.

2

3

Share

What brand of tires does the Mercedes-Benz E300L use?

The Mercedes-Benz E300L uses Bridgestone's TURANZA run-flat tires, with the original tire model being 245/45R18. Below is some relevant information about the Mercedes-Benz E-Class: 1. The Mercedes-Benz E-Class is a mid-to-high-end model in the Mercedes-Benz series, designed with the new Mercedes-Benz S-Class as its inspiration, leading many owners to refer to the new E-Class as a "mini S-Class." 2. To meet the diverse needs of consumers, the Mercedes-Benz E-Class offers a sporty grille, a sedan-style grille, long-wheelbase models, and standard-wheelbase models. The long-wheelbase models, in particular, align well with Chinese consumers' preferences and aesthetic views on cars. 3. The most notable highlight of the new-generation Mercedes-Benz E-Class is its interior design. Moving away from the extensive use of straight lines in older models, the new interior presents a more three-dimensional and luxurious center console effect, which is a key reason many owners favor Mercedes-Benz vehicles. 4. In terms of powertrain, the car's previous 2.0T low-power engine (coded M274) has been replaced by a 1.5T engine with a 48V mild hybrid system. 5. For transmission, it is paired with a 9-speed automatic transmission, available in both four-wheel-drive and two-wheel-drive configurations. The engine delivers a maximum power of 135 kW and a maximum torque of 160 Nm. Thanks to the kinetic energy recovery system, it further enhances fuel efficiency and reduces fuel consumption.

17

0

Share

What type of oil does the Baojun 510 use?

The original factory oil specification for the Baojun 510 is SM/GF-4 5w-30. According to the official maintenance manual, the Baojun 510 requires SM-grade oil with a viscosity rating of 5w-30. The viscosity of engine oil changes with temperature, so it's important to pay special attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Baojun 510 is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passages to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover's oil filler port, typically filling about three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.

10

3

Share

Where is the fuse box located in the Besturn X80?

The fuse box of the Besturn X80 is located under the cover near the left foot on the driver's side. After opening the cover, you will see many fuses. Then, use needle-nose pliers to pull out the fuse and replace it with a new one. Here is more information about the Besturn X80: 1. As the first SUV model launched by FAW Besturn, the FAW Besturn X80 was highly anticipated upon its release. Officially launched in May 2013, it gained market recognition and was a genuinely popular vehicle. 2. The front grille of the FAW Besturn X80 features silver chrome trim decorations and is relatively large. The bottom guardrail also provides a strong sense of security. The headlight design is quite appealing, with L-shaped daytime running lights and round fog lights, making the front look more aggressive. 3. The interior of the Besturn X80 is very simple, with a prominent 12-inch central control screen that exudes a strong sense of technology. The dashboard also feels full of technological features. 4. In terms of dimensions, the Besturn X80 measures 4620 x 1820 x 1695 mm with a wheelbase of 2675 mm, positioning it as a compact SUV. The space is just average, but the presence of an openable panoramic sunroof makes the interior feel more spacious. 5. In terms of the powertrain, the new car is still equipped with a 1.8T and a 2.0L engine. The 2.0L engine has a maximum power of 108 kW and a peak torque of 184 N·m, while the 1.8T engine has a maximum power of 132 kW and a peak torque of 235 N·m. 6. For transmission, the engine is paired with either a 6-speed manual transmission or a 6-speed automatic transmission.

3

4

Share

Can a Temporary ID Card Be Used for the Subject 1 Test?

A temporary ID card can be used for the test. The admission ticket and other documents are handled by the driving school, which will distribute them during the test. Electronic ID cards cannot be used for the test. If you do not have an ID card, you can apply for a temporary one, which holds the same validity as a formal ID card. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 test can be taken twice on the same day. If you fail the first attempt, you can take a second free retest. If you still fail the second attempt, the Subject 1 test will be terminated, and you can only reschedule the test after ten days. The Subject 1 test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point and a total score of 100. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the session. The Subject 1 test is computer-based, with a duration of 45 minutes. Subject 1 test content includes: regulations on driver's licenses and motor vehicle management; road traffic conditions and rules; road traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: During the test, students should pay attention to their attire—no slippers are allowed. Electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. Upon entering, the identity verification area will assign a seat. Once seated, begin the test, ensuring the camera is aligned with you and adhering to test discipline. If you fail the first attempt, a same-day retest is available. If you fail again, you must pay to reschedule. After completion, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, with one retest allowed if you fail. If you do not take the retest or fail it, the test will be terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five test attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, the previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such term as Subject 4.

16

3

Share

What is the tire model of Hyundai ix25?

The tire models of Hyundai ix25 are 205/65R16 for Beijing Hyundai ix25-2020-1.5L-Manual GS Fashion and 215/60R17 for Beijing Hyundai ix25-2020-1.5L-CVT-TOP Flagship. The first numbers 205 and 215 represent the tire width in millimeters. 65 and 60 indicate the aspect ratio of the tire section, which means the section height is 65% and 60% of the width, respectively. 16 and 17 denote the rim diameter in inches, and the letter "R" in the middle stands for radial tire. Hyundai ix25 uses Maxxis brand tires from the Bravo-HPM3 series, and the spare tire is a non-full-size tire. The functions of tires are: transmitting driving force, braking force, and steering force to achieve vehicle operation; supporting vehicle loads; reducing and absorbing vibrations and impacts during driving to prevent severe vibrations from damaging vehicle components. Automotive tires can be divided into pneumatic tires and solid tires based on their structure. Most modern vehicles use pneumatic tires. Pneumatic tires can be categorized into high-pressure, low-pressure, and ultra-low-pressure tires based on internal air pressure. Low-pressure tires are commonly used in various vehicles. Pneumatic tires can also be divided into tube tires and tubeless tires based on their structure. Tubeless tires are widely used in passenger cars. Tires are one of the most important components of a vehicle, adapting to high-speed performance, reducing driving noise, and ensuring safety, handling stability, comfort, and fuel efficiency. Direct sunlight or rain exposure may cause discoloration or fine cracks. Prolonged outdoor exposure accelerates rubber aging. To prevent damage from sunlight, UV rays, rain, ozone, oil contamination, or heat, store tires in a cool, shaded place and release air pressure. Avoid direct sunlight. Vehicle tires are the only components in contact with the ground. Regularly inspect tire conditions to ensure optimal performance, which enhances vehicle dynamics, braking, and off-road capability while protecting other components. During tire use, regularly check tires and rims for hidden damage to maintain peak performance while driving. Most vehicles are equipped with tire pressure monitoring or warning systems. Regularly check tire pressure and inspect for hidden damage. Repair any damage immediately. Note: Avoid overloading the vehicle to prevent excessive tire stress. Vehicles rely on tires to support them on the road, with tire treads directly contacting the surface. Tires not only bear loads and roll but also generate friction with the road through their tread blocks, serving as the source of driving, braking, and steering forces. There are three main types of tire tread patterns: standard, off-road, and mixed. Standard tread: Suitable for hard surfaces. It includes longitudinal, transverse, and combined patterns. Off-road tread: Directional. Off-road tread tires are suitable for rough, unpaved, or soft soil roads. Mixed tread: Features narrow grooves with varying directions or primarily longitudinal patterns, offering balanced performance and adaptability. Besides the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed a tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, e.g., "Standard Rim 5.00F".

14

4

Share

Where is the high-pressure fuel pump located?

How Many Years Can a Pure Electric Vehicle Battery Last?

What brand of tires does the Mercedes-Benz E300L use?

What type of oil does the Baojun 510 use?

Where is the fuse box located in the Besturn X80?

Can a Temporary ID Card Be Used for the Subject 1 Test?

What is the tire model of Hyundai ix25?

Is the Lexus UX Imported or Domestically Produced?

What are the differences between the Baojun 360 and 730?

Is there a domestic version of the Mazda 5?

How many liters can the Mazda 6 fuel tank hold?