Where is the heater switch of GAC Trumpchi GS4?
4 Answers
The heater switch of GAC Trumpchi GS4 is located below the center control screen and above the gear shift lever. Specific location: First, find the position of the center control, which is the position of the screen. Continue downward, and you will reach the car's air conditioning control area. Method to turn on the air conditioning: Start the vehicle and locate the air conditioning button on the center control; Press the AC button to turn on the air conditioning system; Use the middle fan speed button to increase the air conditioning fan speed by turning it upward; Use the left temp button to increase the temperature by turning it upward; Press the internal circulation button to enhance the heating effect, and turn it off after the temperature rises. If the front row has already turned on the heater, and you want to turn on the heater in the rear row as well, simply turn the indicated knob upward to open the rear air vents.
When driving the GAC Trumpchi GS4, the heater switch is actually located in the air conditioning control area on the center console. Simply look for the temperature adjustment knob. Turn it to the red zone for heating and the blue zone for cooling. The car's design is quite user-friendly. Remember to let the engine warm up for a few minutes after starting it. If you turn on the fan before the engine is warm, you'll just get cold air, which is a waste of effort. I often warm up the car before heading out in winter, then adjust the temperature, and the interior becomes cozy instantly. For long-term use, regularly clean the vents to prevent dust buildup from affecting airflow, otherwise, the heating will weaken if the vents are blocked. Don’t forget to turn it off when parking to save fuel. Always be careful not to accidentally press other buttons while operating it—safety first when driving!
I remember the heating control for the GAC Trumpchi GS4 is on the air conditioning panel, usually the big knob in the middle adjusts the temperature. I've done it myself—just turn it to the high-temperature end, and warm air comes out. The operation is very simple, but you need to make sure the air conditioning system is turned on, either by pressing the AUTO button or using manual mode. The key is to regularly check the cabin air filter; if it's dirty, it can affect heating efficiency. I usually replace it once a year. Don’t overuse the heating function—avoid keeping it on for too long in tightly enclosed spaces, as poor ventilation can easily cause fogging. If you feel cold while driving, just turn the knob—it’s convenient and practical. No heating issues with the car? Just get a maintenance check before the season changes, and you’ll be good to go.
When operating the GAC Trumpchi GS4, the heater switch is basically located on the air conditioning control module on the center console. Look for the temperature adjustment knob. Turn it clockwise for hot air and counterclockwise for cold air—it's very simple. Before turning on the heater, it's best to ensure the engine temperature is normal; otherwise, the airflow may be weak and ineffective. Regularly check to prevent the knob from getting stuck or too dirty, and clean the panel periodically. The heater is an essential feature in the car, especially for safe warmth during high-speed winter driving. If the heater stops producing hot air after prolonged use, it could be due to a clogged cabin air filter or an electrical issue. Avoid disassembling it yourself and consult a professional for inspection. Just keep up with regular maintenance.
