···
Log in / Register

Where is the headlight switch for an automatic transmission car?

3 Answers
StAlana
07/29/25 10:15pm
Automatic transmission car headlight switch is located at the lower left side of the steering wheel. Automatic transmission means the driver does not need to manually shift gears, as the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The gears for automatic transmission are: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear; 5. S gear is the sport mode; 6. L gear is the low gear. The correct starting steps for an automatic transmission car are: 1. After the driver sits in the driver's seat, press the start button directly; 2. Press the brake and press the start button to ignite and start; 3. Release the foot brake and warm up the car in place; 4. Press the brake again and shift to D gear; 5. Release the handbrake and slowly release the foot brake to start.
Was this review help?
1
3
Share
VanColton
08/15/25 10:40pm
When I drove my friend's automatic transmission car before, I noticed that the headlight switch was on the small control stalk to the left of the steering wheel. You just twist the end of the stalk to turn on the headlights, which is very convenient to operate. Most car models are designed this way, such as Japanese cars like the Honda Civic or American cars like Ford, with similar positions. However, some high-end cars, like Teslas with automatic functions, have the light switch on the stalk where twisting it activates the lights that sense darkness and turn on automatically, which is quite hassle-free. When driving, always check the position of this switch first. Forgetting to turn on the lights in the dark or in tunnels can easily lead to accidents. Remember that other lights on the car, such as fog lights, are also toggled on the same stalk, so don't get confused. Safety comes first, and practicing a few times will make you familiar with it. Don't get distracted when looking for the switch; make sure the car is parked and stable before feeling for its position.
Was this review help?
15
3
Share
Expand All
FelixRose
10/17/25 8:37am
Having driven automatic transmission cars for over a decade, the common position for the headlight switch is that small lever on the left side of the steering wheel—just a gentle twist turns the lights on. When I was younger driving older models, the switch was on the dashboard and required turning a knob, but now most new cars integrate it into the lever, making it much simpler. This is typical in automatic transmission car designs for convenient one-handed operation while driving—models like the Toyota Corolla or Volkswagen Tiguan are no exception. Always remember to adjust your lights before driving; getting fined for forgetting to turn them on at night is minor compared to the risk of accidents. I’ve developed a habit of instinctively checking that spot before driving to ensure the lights are on. A related tip is to turn on your lights early in rainy or foggy conditions—don’t wait until it’s dark to scramble for the switch. Technology evolves, but safety awareness must keep pace.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How long after starting the car can you drive off?

For cold starts of small cars, it's advisable to wait about five minutes before driving off. Here's the relevant information: Reasons for needing to warm up the car: 1. Lack of lubrication: After the car has been parked for a long time, the engine oil flows back into the oil pan at the bottom of the engine. Therefore, when starting the engine after prolonged inactivity (such as overnight), the upper part of the engine is in a state without oil and lacks lubrication. It takes about 10 seconds after starting for the oil pump to circulate the oil to the parts of the engine that need lubrication the most, such as the pistons, connecting rods, and crankshaft. 2. Inability to effectively vaporize gasoline completely: Before the engine reaches its operating temperature (approximately between 90-110 degrees Celsius), the fuel system, due to the low temperature, cannot effectively vaporize the gasoline completely. When the gasoline is not vaporized and remains in a 'wet' liquid state, it is difficult to burn and start the engine.
19
0
Share

Do new cars need snow tires in the first year?

In the first year of a new car, it is necessary to decide whether to switch to snow tires based on the usage environment. Snow tires are specifically designed for winter driving conditions, ensuring driving safety and optimal vehicle performance in winter climates, regardless of whether the car is new or old. In China, regions like the three northeastern provinces, Inner Mongolia, Xinjiang, and Gansu replace their tires with snow tires annually. In snowy areas, the decision to use snow tires depends on specific usage conditions. Most original equipment tires on vehicles are all-season tires, which generally have mediocre winter performance and cannot guarantee good driving performance on ice and snow roads. Therefore, as long as the driving environment involves ice and snow roads, it is advisable to switch to snow tires.
18
2
Share

What is the H7/h6 fit?

H7/h6 is the tolerance fit code for mechanical components in the industry. H7 refers to the tolerance zone code for the hole it fits with, while h6 represents the tolerance zone code for the outer surface of the bearing (where the bearing acts as the shaft when fitting with the hole). The outer and inner diameter dimensions of the bearing vary, so while the tolerance zone H7/h6 is the same for different bearing sizes, the actual tolerance values differ. The numerical values of H7/h6 are related to the diameter—the larger the diameter, the larger the H7/h6 value, and vice versa. The functions of a tire are: 1. To transmit driving force, braking force, and steering force to enable vehicle operation; 2. To support the vehicle load; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging automotive components. Methods for tire maintenance include: 1. Regularly checking tire pressure; 2. Periodically inspecting tires for bulges, cracks, cuts, punctures, or abnormal wear; 3. Removing foreign objects such as stones, metal pieces, or nails from tire treads; 4. Performing wheel alignment or tire dynamic balancing.
15
5
Share

How Does a Seat Belt Work?

Seat belts work by: 1. Tightening promptly to secure the occupant in the seat at the moment of an accident; 2. Releasing moderately, once the peak impact force has passed or when the occupant is protected by the airbag, to prevent rib injuries caused by excessive tension. Advanced seat belts are equipped with pre-tensioners and force limiters. When properly fastened, they distribute most of the stopping force across the chest and pelvis—areas of the body that are relatively strong. Since seat belts span a wide area of the body, the force is not concentrated in a small region, thereby minimizing potential injuries.
3
4
Share

How to Remove and Install the Radio in Changan Yuexiang V3?

Changan Yuexiang V3 radio removal and installation method: 1. Remove the border frame; 2. After removing the border frame, you can see the screws on both sides of the radio, remove the screws to pull out the radio. The Yuexiang V3, originally codenamed Changan B501, is Changan Automobile's response to the new consumption trends in the domestic entry-level family car market. In terms of appearance, the car adopts a dolphin bionic design; in terms of power, it uses Changan Automobile's efficient and low-consumption C13 all-aluminum engine; in terms of safety configuration, it features large-sized brake pads. The Changan Yuexiang V3 has a body length, width, and height of 4180mm, 1650mm, and 1465mm respectively, with a wheelbase of 2410mm.
14
3
Share

What Causes Engine Shaking at Idle in New Cars?

The causes of engine shaking at idle in new cars are: 1. Severe engine carbon buildup. A common reason for car shaking is excessive dirt in the throttle body or carbon buildup in the fuel injectors. The solution is to clean the fuel system and check the idle air control valve for carbon deposits, which should be cleaned if necessary. 2. Ignition system issues. Poor performance of the ignition system or faulty spark plug firing can also lead to such symptoms. The solution is to check if the spark plugs have excessive carbon buildup and replace them if needed. 3. Unstable fuel pressure. If you have already cleaned the engine carbon deposits, throttle body, replaced gaskets and spark plugs, but still experience body shaking at idle, it is recommended to visit a 4S shop to check the fuel supply pressure and intake pressure sensors. Abnormal fuel pump pressure or faulty readings from the intake pressure sensor can cause body shaking. The solution is to check the fuel pressure and replace components if necessary.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.