Where is the headlight adjustment button for the CX-4?

2 Answers
OAnna
08/29/25 7:56am
In the control area below the left side of the steering wheel. Here is some related information about the Mazda CX-4: 1. Styling: The new car features a very sporty overall design, with the front end continuing Mazda's "KODO" design philosophy. The grille adopts a shield shape, and the chrome trim below adds a touch of sharpness to the front. Additionally, the CX-4 comes standard with LED headlights across the entire lineup. 2. Design: The Mazda CX-4 largely follows the design of the Mazda KOERU concept car, achieving optimizations to the SKYACTIV technology and further evolution of the KODO design. It is a compact coupe SUV model that Mazda has developed to enhance its product lineup and market competitiveness.
Was this review help?
19
2
Share
LeMaddox
09/11/25 5:25am
As a long-term CX-4 owner for several years, the headlight adjustment button is usually located at the end of the steering column lever on the left side of the steering wheel or at the lower left corner of the dashboard, where there's a small knob or button. I often helped friends locate it—after parking, a gentle turn adjusts the height to avoid blinding pedestrians at night or having lights too low to see the road clearly. If you can't find it, don't panic; just refer to the owner's manual for the diagram. Make it a habit to check light alignment with each season change to ensure driving safety and fewer malfunctions. I always test the adjustment afterward, ensuring the beam is just right before setting off—this isn't just a driving skill but also a responsibility.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

How is the safety performance of Volvo?

Volvo has a very high safety rating. The specific analysis is as follows: Birdcage structure cabin: It adopts the design concept of a safety cabin cage frame, which was later named the birdcage structure cabin. This cabin integrates the body and chassis into a single design, ensuring they do not separate even under severe impact. Additionally, it is equipped with special laminated glass that is sturdy and shatter-resistant, providing better protection for occupants in the event of a collision. Blind spot monitoring system: During driving, drivers may face inconveniences or even accidents due to various blind spots. Many mid-to-high-end models now feature this technology, effectively giving drivers extra 'eyes' to better observe traffic conditions around the vehicle. Volvo actually introduced this technology to its models as early as 2003, although it has only become widely popular in recent years.
16
1
Share

What is the original tire model of the Toyota E'Z?

206/60R16. The following are the specific details of the Toyota E'Z: 1. Vehicle positioning: The Toyota E'Z is positioned as a compact MPV, with dimensions of 4450mm × 1790mm × 1640mm and a wheelbase of 2780mm. 2. Powertrain: It offers three engine options: 1.6L, 1.8L, and 2.0L. The 1.6L engine delivers a maximum output of 90kW and a maximum torque of 154Nm. The 1.8L engine produces a maximum output of 103kW and a maximum torque of 173Nm, while the 2.0L engine provides a maximum output of 107kW and a maximum torque of 187Nm, paired with a CVT transmission system. 3. Features: Standard equipment includes VSC (Vehicle Stability Control), TRC (Traction Control), HAC (Hill-start Assist Control), SRS front side airbags, and a driver's knee airbag.
6
3
Share

What are the reasons why the Ford Kuga's trunk cannot be opened?

The Kuga's trunk may not open due to issues with the linkage rod or the lock cylinder. Below is a partial introduction regarding the inability to open a car trunk: 1. Solutions: If you frequently use the key to open the trunk lid, the linkage rod might be damaged, and you should go to a repair shop to have it opened. For instance, if you always use the remote control to open the trunk lid, the lock cylinder might be dirty or rusted. Spraying rust remover into the lock cylinder a few times can help open it. 2. Emergency measures: Most car models have a small slot inside the trunk. You can use a key or another sharp object to pry open the outer cover. Once the cover is removed, you can see the rear trunk locking mechanism inside. Simply pull it slightly by hand to easily open the trunk door.
12
3
Share

Can You Drive with a Flat Rear Tire?

You cannot drive with a flat rear tire. At high speeds, whether it's a front or rear tire blowout, the first thing to do is to release the accelerator and steady the steering wheel. Avoid jerking the wheel or slamming on the brakes, and do not engage the handbrake. Once the vehicle's direction is stabilized, you can lightly tap the brakes to further reduce speed and gradually pull over to the side. If traffic is heavy, turn on the hazard lights to alert vehicles behind you. The car should be parked on the roadside or emergency lane, preferably on a flat surface. If the hazard lights are not already on, they should be activated immediately to warn other drivers. When changing to a spare tire, place a warning triangle 50 to 100 meters behind the vehicle, or 150 meters on highways. In rainy or foggy conditions, increase this distance appropriately to alert approaching vehicles.
19
4
Share

What Should Vehicles Do When Passing Through Mountain Road Curves?

When passing through mountain road curves, vehicles should "slow down, honk the horn, and keep to the right". The safe driving methods for mountain roads are as follows: 1. Maintain distance: Due to the rugged, narrow, and many blind spots of mountain roads, do not follow too closely when driving behind another vehicle. Instead, keep a greater distance than in urban driving to avoid rear-end collisions and allow yourself time and space to react to sudden situations. 2. Do not coast in neutral: Because mountain roads are rugged. Do not coast in neutral for convenience, as prolonged use of brakes alone may lead to brake performance degradation or even failure. 3. Signal in advance: When entering a curve, honk the horn based on road conditions and traffic signs to alert oncoming vehicles. When overtaking on mountain roads, turn on the turn signal in advance and also use the horn to alert others.
16
0
Share

BMW B48 Connecting Rod Bolt Torque?

BMW B48 connecting rod bolt torque needs to be tightened to 8-9 kg, connecting rod 5-6 kg, and crankshaft 10 kg. From the middle to both sides and then fully loosen: First, tighten from the middle to both sides, initially to 50% of the final torque, then fully loosen. From the middle to both sides: Then tighten from the middle to both sides to 50%. Tighten the cylinder head bolts: Finally, follow the method of first middle then both sides to tighten the cylinder head bolts. Do not overtighten, as this can cause excessive stress on the bolts, not only leading to stripped internal threads but also potentially breaking the bolts directly.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.