Where is the hazard warning light of Baojun 510?

What is the approximate temperature for 60% oil heat?

During normal vehicle operation, the engine's standard working temperature for oil is approximately between 90~110 degrees Celsius. Therefore, 60% oil heat should be in the range of 70-90 degrees Celsius. Before reaching normal temperature: The engine's standard working temperature is around 90~110 degrees Celsius. Before reaching this temperature, the fuel supply system remains cold, making it difficult to fully vaporize gasoline efficiently. Under such conditions, combustion is less effective for engine startup. During this phase, the engine relies on the choke valve to restrict some air from entering the cylinders, increasing the fuel-air mixture ratio and raising the engine speed to prevent stalling. After reaching normal temperature: Once normal operating temperature is achieved, the automatic choke valve returns to its standard position through mechanical action. Hence, for vehicles that have been idle for extended periods, it is advisable not to drive within the first minute after startup. Instead, let the engine idle for about a minute to warm up.

12

0

Share

What are the consequences of driving 20 kilometers without engine oil?

When a car continues to drive without engine oil, the lubrication effect becomes very poor. In severe cases, the lack of lubrication can cause the engine to seize. The less oil there is, the more severe the consequences will be. When the engine is started again, dry or semi-dry friction may occur between the cylinder and piston, accelerating the wear of parts and significantly increasing the resistance during startup, making it difficult to start. Functions of engine oil: Lubrication: The primary function of engine oil is to provide proper lubrication to the engine's pistons, bearings, and other components; Sealing: During the "power" stroke of the engine, it prevents high-temperature and high-pressure gases in the combustion chamber from leaking into the crankcase through the gap between the piston and cylinder. Symptoms of a car without engine oil: The oil light on the dashboard will illuminate. Therefore, when the oil light comes on, engine oil should be added immediately; Elevated water temperature and valve noise; There may also be knocking sounds in the engine.

13

1

Share

What Are the Must-Know Tips for Passing the Subject One Exam?

The essential tips for passing the Subject One exam include overtaking taboos, right-of-way rules, and warning sign placement distances. Overtaking Taboos: Do not overtake ambulances, fire trucks, police cars on emergency duty, or engineering rescue vehicles; also avoid overtaking on pedestrian crossings, narrow roads, curves, narrow bridges, railway crossings, or tunnels. Right-of-Way Rules: Turning vehicles yield to straight-moving ones; right-turning vehicles yield to left-turning ones; downhill vehicles yield to uphill ones (unless the downhill vehicle is already halfway, then it proceeds first). All other vehicles must yield to buses, school buses, police cars, ambulances, or fire trucks. Warning Sign Placement Distances: 50-100 meters on regular roads; over 150 meters on highways.

2

4

Share

What causes the C4L 1.8 to burn engine oil?

The reasons for the C4L 1.8 burning engine oil include excessive carbon deposits, corrosion and aging of valve stem seals, and damage to seal components. Excessive carbon deposits: Excessive carbon deposits accumulate in the piston grooves, causing the piston rings to stick together and become jammed, preventing them from sealing completely. The 'stuck' piston rings significantly reduce their oil-scraping and sealing capabilities. This also exacerbates wear between the pistons and cylinder walls, creating excessive clearance that allows engine oil to enter the combustion chamber. Corrosion and aging of valve stem seals: Corrosion and aging of valve stem seals result in poor sealing. Valve stem seals are vulnerable components prone to aging. Aging of crankshaft seals: Aging of front and rear crankshaft seals occurs as they are continuously exposed to large areas of oil. The impurities in the oil and temperature fluctuations within the engine gradually weaken their sealing effectiveness, leading to oil seepage or leakage.

20

0

Share

Does the black roof wrap AC pillars exceed 30%?

Applying a black roof wrap to AC pillars does not exceed 30%. Generally, the area of the car roof does not exceed 30% of the entire vehicle body, so only applying a roof wrap does not require filing for approval. If the roof area of your car is large and you are unsure whether it exceeds the standard, it is recommended to first call the vehicle management office for clarification before making a decision. Vehicle color change: It is worth mentioning that not all color combinations are permitted. The body color change cannot mimic the styles of police cars, taxis, fire and ambulance vehicles, or chrome-plated body wraps. Additionally, the color change should not exceed three colors. Therefore, it is best to consult the vehicle management office with a color chart before proceeding with the color change. Black roof wrap can pass annual inspection: Because applying a black roof wrap does not constitute illegal modification, and current laws and regulations do not explicitly prohibit vehicle color changes. However, when applying the wrap, it is advisable to avoid unconventional colors such as electro-optic film or chameleon colors, as they may not pass the annual inspection later and could also affect traffic safety to some extent.

10

3

Share

Where does the Hangzhou-Changxing Expressway run from and to?

The Hangzhou-Changxing Expressway runs from the Hangzhou Ring Road to Sian, Changxing. The expressway starts from the Hangzhou Ring Road in the south and extends to the Sian Interchange in Changxing in the north, connecting to the Shanghai-Suzhou-Zhejiang-Anhui Expressway, with a total length of approximately 86 kilometers. It features four lanes in both directions and a design speed of 120 kilometers per hour. There are six interchanges along the route: Pingyao, Jingshan, Huanghu, Baizhang, Anji, and Anji North, with two service areas at Jingshan and Anji. The Hangzhou Bay area, being close to Shanghai and adjacent to Jiangsu, enjoys significant geographical advantages with access to rivers and the sea. The construction of the Hangzhou-Changxing Expressway has established a convenient and rapid corridor between northern Zhejiang, particularly Huzhou, Changxing, and Anji, and Shanghai, providing strong support for the development of the Hangzhou Bay industrial belt. Additionally, it has further enhanced Hangzhou's role as the central hub of Zhejiang's highway transportation network, strengthening its aggregation and radiation effects.

8

3

Share

Where is the hazard warning light of Baojun 510?

What is the approximate temperature for 60% oil heat?

What are the consequences of driving 20 kilometers without engine oil?

What Are the Must-Know Tips for Passing the Subject One Exam?

What causes the C4L 1.8 to burn engine oil?

Does the black roof wrap AC pillars exceed 30%?

Where does the Hangzhou-Changxing Expressway run from and to?

What to Do When a Car Won't Start?

Do the speed display screens on highways take photos?

Which car models feature suicide doors?

Is it safe to drive on the highway with a tire pressure of 2.9 bar?