Where is the Haval H4 transmission from?

Do all cars with auto start-stop shake?

Cars with auto start-stop systems may experience shaking, and here are the reasons for vehicle shaking: 1. Suspension system issues: Body shaking can also be related to aging suspension systems. The suspension is primarily responsible for filtering out the vibrations generated by the engine during operation. If there are problems with the suspension, these vibrations can be directly transmitted to the steering wheel and the interior of the vehicle, affecting the driving experience. 2. Throttle body issues: The most common cause of car shaking is likely a dirty throttle body and excessive carbon buildup in the fuel injectors. After driving a certain number of kilometers, a dirty throttle body can cause it to not close properly or the idle motor to stick, resulting in an excessively high engine idle speed. The carbon deposits generated by the engine during this process can also lead to vehicle shaking.

15

3

Share

How Many Turns of the Car Key Are Needed to Start the Engine?

Two turns of the car key are needed to start the engine. This is because the car key has two positions: the first is the vehicle's operating position, also known as the ON position, and the second is the starting position, referred to as the ST position. Functions of the ON and ST positions: When in the ON position, the vehicle's entire electrical system is activated, including the engine's electronic control system. At this stage, most of the vehicle's electrical devices are turned on, and all dashboard lights illuminate, indicating this position. In the ST position, the vehicle cuts off power to the body circuits to ensure the starter motor operates, retaining only the engine's electronic control system power. The starter motor then engages to start the engine. Once the engine is running, releasing the key automatically returns it to the ON position, allowing the vehicle to operate normally. Introduction to Manual Transmission Gears: 1st Gear: Used for normal starts or climbing very steep hills. Speed typically around 10 km/h; 2nd Gear: A transitional gear for acceleration after starting or for low-speed driving, speed generally around 20 km/h; 3rd Gear: Used at speeds between 20-40 km/h, commonly used in urban driving; 4th Gear: Used at speeds between 40-60 km/h; 5th Gear: Used at speeds above 60 km/h; N Gear: Neutral, used when idling or parked; R Gear: Reverse gear, engaged when the vehicle is stationary to move backward.

2

1

Share

What is the correct sequence for depressing the clutch and shifting gears?

The sequence for depressing the clutch and shifting gears is as follows: fully depress the clutch, shift to the correct gear, slowly release the clutch, and then apply the throttle. Below are some precautions for operating a manual transmission vehicle: Correct posture and method for depressing the clutch: Place the ball of your foot on the clutch pedal with your heel naturally resting on the ground. Ensure that when the clutch pedal is fully depressed, your thigh and calf form a naturally curved angle. When the vehicle speed is low, release the clutch slowly to avoid strong jerking sensations. Once the speed increases, you can release the clutch quickly with minimal jerking. When shifting between first, second, and third gears (low-speed gears), release the clutch slowly to prevent stalling and jerking. When shifting between higher gears, you can release the clutch quickly. Correct methods and precautions for gear shifting: Shift gears in a timely, accurate, decisive, and swift manner; avoid hesitation. When upshifting, first accelerate, and when downshifting, first decelerate. When changing gears, pay attention to the speed relationship between different gears and master the timing of shifting. If the vehicle trembles or is about to stall when shifting to a higher gear, firmly grip the clutch lever, downshift, and wait for the speed to increase before attempting to shift to the higher gear again. During gear shifting, always keep your eyes looking straight ahead; avoid looking down, glancing around, or being distracted.

7

3

Share

What does Audi fault code p218800 mean?

The causes of Audi fault code p218800 are as follows: It may be caused by excessive fuel pressure, faulty fuel injector, engine control module failure, coolant temperature sensor failure, etc. Below is the relevant introduction to Audi fault codes: 1. P004B: Turbo/supercharger boost control B circuit range/performance malfunction. 2. P1629: Controller Area Network (CAN) data link, cruise control and other equipment experience no signal. 3. P3443: Heated oxygen sensor 3, cylinder 6 deactivation system/intake valve control detects no activity.

9

5

Share

Is the spare tire of Honda XRV the same as the original tire?

Honda XRV's spare tire is the same as the original tire. Here is an introduction about XRV: 1. Introduction: The XRV is a strategic model launched by Dongfeng Honda for the compact SUV market, and it is another specialized model developed after the Jade, catering to the needs of China's young population. 2. Exterior: While inheriting the excellent quality of the CR-V, the XR-V incorporates Honda's latest design concepts, featuring a sporty and individualistic appearance, finely crafted interior with exquisite textures, and dazzling colors, all thanks to Honda's innovative MM concept packaging layout. 3. Advantages: With the spaciousness and comfort of an SUV, the 1.8L model comes standard with a panoramic sunroof across the entire lineup, making it a truly cutting-edge and fashionable SUV that provides a brand-new automotive lifestyle experience for urban young people who love fun and entertainment.

12

2

Share

What is the correct method for making a left turn at an intersection?

When making a left turn at an intersection ahead while driving a motor vehicle, you should activate the left turn signal in advance before turning, observe pedestrians and oncoming traffic ahead, and proceed with the left turn after confirming safety. Additionally, at intersections with traffic lights, pay attention to the traffic signals and the movement of pedestrians and vehicles. According to Article 51 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicles passing through signal-controlled intersections shall comply with the following rules: at intersections with designated lanes, enter the appropriate lane based on the intended direction of travel; vehicles preparing to enter a roundabout must yield to vehicles already inside the intersection; when making a left turn, turn from the left side of the intersection's center point. Activate the turn signal when turning, and use low beams when driving at night; proceed in sequence when the signal permits; stop beyond the stop line when the signal requires a stop. If there is no stop line, stop before entering the intersection; when making a right turn and encountering a vehicle in the same lane waiting for the signal, stop and wait in sequence; at intersections without directional signal lights, turning vehicles must yield to straight-moving vehicles and pedestrians. Right-turning vehicles from the opposite direction must yield to left-turning vehicles. Article 57 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states that motor vehicles shall use turn signals as follows: activate the left turn signal in advance when making a left turn, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn; activate the right turn signal in advance when making a right turn, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside.

6

5

Share

Where is the Haval H4 transmission from?

Do all cars with auto start-stop shake?

How Many Turns of the Car Key Are Needed to Start the Engine?

What is the correct sequence for depressing the clutch and shifting gears?

What does Audi fault code p218800 mean?

Is the spare tire of Honda XRV the same as the original tire?

What is the correct method for making a left turn at an intersection?

Why does the oil can light come on and then disappear after starting?

How Often Should a Vehicle's Battery Be Replaced?

What does brake fluid maintenance service mean?

How to reset the Volkswagen EPC warning light by yourself?