Where is the handbrake required in Subject 2?

1 Answers
StAdeline
07/29/25 6:55pm
In Subject 2, the handbrake is required wherever there is a need to stop the vehicle. Related information: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items for small cars C1 and C2 include reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns) as the five mandatory test items (some regions also include a sixth item, high-speed card collection). 2. Expansion: The test items for large vehicles A1, A2, A3, B1, and B2 include stake test, stopping and starting on a slope, parallel parking, passing through a single-plank bridge, driving through curves, turning at a right angle, passing through a width-restricted gate, passing through continuous obstacles, driving on undulating roads, making a U-turn on a narrow road, and simulating highway driving.
Was this review help?
3
4
Share
More Forum Discussions

How to Remove Sticky Substances from Car Paint?

Sticky substances on car paint can be removed using Wanhua oil, essential balm, or medical alcohol. The primary step is to pour the solution onto a cloth and then wipe the affected area directly. After wiping, rinse with clean water to ensure no residue remains on the paint, as it could potentially corrode the finish. Depending on the vehicle's usage, perform this cleaning every 3 to 6 months. When cleaning the exterior of the vehicle, avoid using laundry detergent, as its ingredients can significantly damage the paint. Instead, use foam specifically designed for car cleaning. After removal, apply wax to the vehicle's exterior to effectively protect and maintain the paint.
12
5
Share

What is the chassis code for the rear-wheel-drive BMW X1?

The chassis code for the rear-wheel-drive BMW X1 is E84. The BMW X1 is a compact SUV under the BMW brand. The dimensions of this vehicle are 4454mm in length, 1798mm in width, and 1545mm in height, with a wheelbase of 2760mm. The BMW X1 is equipped with two naturally aspirated engines: a 2.0-liter naturally aspirated engine and a 3.0-liter naturally aspirated engine. The 2.0-liter naturally aspirated engine in the X1 delivers a maximum power of 110 kW and a maximum torque of 200 Nm, with the maximum torque achieved at 3600 rpm and the maximum power at 6400 rpm.
9
1
Share

What Causes Engine Shaking During Vehicle Acceleration?

Here are the reasons for shaking during vehicle acceleration: 1. Engine operation issues. When a car is running, the engine must maintain optimal working conditions. Generally, insufficient air intake or poor fuel-air mixture can lead to suboptimal engine performance, causing shaking during operation. 2. Ignition system failure may occur due to incorrect ignition timing or prolonged use of worn-out spark plugs. 3. Extended use of spark plugs can cause aging, leading to increased ignition gaps. Abnormalities in the engine's ignition system can also result in shaking during acceleration. It is recommended to replace spark plugs with higher-quality ones and the timing chain.
8
0
Share

What causes the abnormal noise when the car steering is turned to the limit?

The reasons for abnormal noise when the car steering is turned to the limit are: 1. Sound from the turn signal reset: If the turn signal is activated while turning, this sound is produced by the rebound clip of the turn signal's automatic reset mechanism; 2. Sound from interference with the clock spring: Remove the steering wheel clock spring and apply some grease to see if the noise persists. If it does, replace the clock spring; 3. Abnormal noise coming from inside the steering wheel; 4. Noise from the steering column dust cover: Lack of lubrication in the steering column dust cover can cause friction noise. In this case, simply applying some grease inside the dust cover will eliminate the noise.
9
1
Share

What are the reasons for a car's air conditioner to intermittently cool and then stop cooling?

Car air conditioner intermittently cooling and then stopping cooling may be due to internal blockages, excessive moisture in the air conditioning system, abnormal refrigerant levels, etc. Here is a detailed introduction about car air conditioners: 1. Overview: The car air conditioning device (air-conditioning-device), referred to as car air conditioning. It is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state. 2. Function: It can provide a comfortable riding environment for the driver, reducing travel fatigue; create good working conditions for the driver, ensuring driving safety. The car air conditioning system usually includes a cooling device, heating device, and ventilation device.
19
5
Share

What Causes All Dashboard Indicator Lights to Flash?

The reasons for all dashboard indicator lights flashing are as follows: 1. ECU CAN bus failure, poor contact at the ECU CAN interface; 2. Excessive dirt and carbon deposits, abnormal air flow, inability to accurately control normal air intake, leading to unstable gas content and poor engine performance; 3. Low fuel pressure and poor constant pressure performance result in low system atomization levels, making the car difficult to start. More related information is as follows: The car dashboard is a device that reflects the working conditions of various vehicle systems, including the speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging gauge, as well as warning lights such as the coolant level warning light and fuel level indicator.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.