Where is the handbrake on the Honda XRV?

2 Answers
AbelDella
07/29/25 11:30am
Honda XRV handbrake is located next to the gear lever. Introduction to the electronic handbrake is as follows: Types of handbrake: The handbrake of Honda XRV is an electronic handbrake, and the icon of the electronic handbrake is: a circle with the letter P inside. Electronic handbrake: The electronic handbrake is also known as the electronic parking brake system. The electronic parking brake system integrates the temporary braking during driving and the long-term braking after parking, and realizes the parking braking technology through electronic control. Basic functions of the electronic handbrake: From the basic parking function to the automatic parking function AUTOHOLD. It allows the driver not to brake for a long time when the vehicle stops. When the automatic electronic parking brake is activated, it can prevent unnecessary sliding of the vehicle.
Was this review help?
16
1
Share
DelLane
08/13/25 7:18pm
I've been driving the Honda XR-V for a while now, and the handbrake in this car is an electronic button, conveniently located on the center console area to the right of the driver's seat, right next to the gear shift or below the steering wheel. When parking, just lightly press the button marked with a P—it's super simple and effortless, unlike the hassle of pulling a lever in older cars. The electronic handbrake is designed with a reasonable position that minimizes accidental touches, and it responds quickly, making it safe and reliable, especially during frequent stops in congested city traffic. New drivers don't need to worry about finding it; it's very conspicuous, and you'll get familiar with it in just five minutes. Remember to ensure it's fully engaged when parking on a slope to prevent rolling, as this is crucial for driving safety.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How Long Does It Take to Transfer Ownership of a Used Car?

Local ownership transfer can usually be completed on the same day as long as all required documents are in order. Duration for out-of-town used car ownership transfer: Transferring ownership of an out-of-town used car requires extracting the vehicle's major and minor files, which typically takes about 7 working days to complete. Before proceeding with an out-of-town transfer, it is advisable for the buyer to consult the local traffic management department regarding the vehicle relocation policy. The seller should also check the local regulations on vehicle relocation. Important notes for used car ownership transfer: When engaging in a used car transaction, remember not only to transfer the ownership but also the car insurance to avoid unnecessary complications in the future. The insurance transfer for a used car is essentially a post-transaction procedure, which involves changing the beneficiary and license plate number on the original insurance endorsement after completing the owner information update and obtaining the new vehicle license plate and registration certificate.
14
3
Share

What is the actual fuel consumption per 100 kilometers for the Changan CS75?

There are currently 3 latest models of the Changan CS75 available for sale. Among them, the 2022 Blue Whale Edition 1.5T DCT Premium and Luxury models are equipped with a 180-horsepower engine, with an NEDC fuel consumption of 6.5L per 100 kilometers. The 2022 Blue Whale Edition 1.5T Manual Elite model is also equipped with a 180-horsepower engine, with an NEDC fuel consumption of 6.2L per 100 kilometers. The fuel tank capacity of the Changan CS75 is 58L. The distance that different models can travel on a full tank of fuel is as follows: For the 2022 Blue Whale Edition 1.5T DCT Premium and Luxury models, the distance on a full tank is 58/6.5*100=892km. For the 2022 Blue Whale Edition 1.5T Manual Elite model, the distance on a full tank is 58/6.2*100=935km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.
12
3
Share

What brand is irelli tires?

irelli is Pirelli tires. The following is an introduction to Pirelli tires and their characteristics: Introduction to the Pirelli brand: Pirelli tires are headquartered in Italy and are a well-known European tire brand. Pirelli is one of the world's most renowned tire companies, founded in Italy in 1872, and is the fifth-largest tire manufacturer globally, currently operating 24 factories worldwide. Prestigious automotive brands such as Audi, Bentley, Ferrari, Lamborghini, BMW, and Mercedes-Benz all designate Pirelli tires as their original equipment tires. Introduction to the characteristics of Pirelli tires: The single-directional tread features two wide lateral grooves that provide higher safety on wet roads, while innovative blade-shaped longitudinal grooves ensure traction during precise steering and improve grip on snowy surfaces; they reduce fuel consumption and CO2 emissions. With green performance technology, they can reduce rolling resistance by up to 20%, thus achieving fuel savings of up to 4%; environmentally friendly materials are used in production, minimizing environmental impact during both the manufacturing phase and the tire's lifecycle.
2
5
Share

What does Class II chassis mean?

Class II chassis generally refers to a chassis that is fully equipped except for the installation of the vehicle body. Introduction to Class II chassis: The so-called Class II chassis refers to an automotive chassis that comes with a cab. Each chassis has a corresponding chassis model number, similar to an ID card, and can be used for specialized vehicles such as liquefied gas tankers, various tank trucks, cranes, refrigerated trucks, van trucks, etc. Methods for chassis inspection: Check for signs of rust. Due to long-term exposure to extremely harsh working conditions, the chassis is subject to the greatest harm and erosion. During rainy weather, the chassis comes into direct contact with rainwater; in snowy conditions, it directly contacts cold snow. Inspection of chassis equipment and components: The chassis carries many important vehicle components, and the exhaust assembly is one of the key items to inspect. Although part of the exhaust assembly is located in the engine compartment, most of it is mounted on the vehicle chassis.
8
5
Share

Can You Avoid Being Caught by Cameras When Not Following Lane Directions?

Not following lane directions may not always be captured by cameras, but the chances are relatively low. Penalties for not following lane directions: Depending on the situation, traffic police may impose different penalties. Generally, it results in a fine and a deduction of 2 to 3 points. Alternatively, making a U-turn or left turn in areas where it is not allowed or prohibited can lead to a fine and a deduction of 3 points. Additionally, entering dedicated lanes without permission, such as bus lanes, specific vehicle lanes, or bicycle lanes, will result in a fine and a deduction of 3 points. Methods to avoid penalties for lane direction violations: When approaching traffic light intersections, avoid crossing solid lines and ensure your vehicle stays within the designated lane. Crossing solid lines at traffic light intersections is easily captured by electronic cameras. If you intended to go straight but ended up in a left-turn lane, do not proceed straight from the left-turn lane. Instead, make a left turn and find the next intersection to make a U-turn. When driving on ramps, pay attention to road signs and follow the regulations.
9
1
Share

Can 12123 handle cross-province violation points deduction?

Traffic management 12123 cannot handle cross-province violation points deduction for out-of-town violations. For out-of-town violations, you can go to the local traffic detachment to handle it or have a local friend handle it on your behalf. Methods for vehicle violation inquiry: Go to the office hall of the traffic detachment in each city or district and inquire through the touch query terminal, or log in to the external service website of the Public Security Traffic Management Bureau of each city: find the vehicle violation inquiry, enter the license plate number and vehicle engine number, and click to inquire. Consequences of not handling violations: If the points exceed 12 within a scoring cycle and the violation is not inquired in time, there may be multiple similar violations. However, a scoring cycle (one year) is 12 points, and if the points exceed this limit, after paying the fine and late fee, the points will not be automatically eliminated. You should also go to the traffic management department of the public security organ where the motor vehicle driver's license was issued or where the violation occurred to receive seven days of education on road traffic safety laws, regulations, and related knowledge.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.