Where is the Handbrake on the Honda Jade?

1 Answers
MarleyFitz
07/29/25 10:33am
Honda Jade's handbrake is located to the left of the brake pedal, slightly smaller than the brake pedal. It uses a foot-operated parking brake. Pressing it all the way down is equivalent to pulling the handbrake, and pressing it again releases the handbrake, making it very convenient. Below is an introduction to the Honda Jade: 1. The Jade is a compact hatchback model under Honda, available in a five-seat configuration. 2. In terms of power, the Honda Jade offers two powertrain options: a 1.8L naturally aspirated engine and a 1.5L turbocharged engine. 3. The 1.8L engine delivers a maximum horsepower of 141 hp and a peak torque of 174 Nm, with the maximum torque achieved at 4,300 rpm and maximum power at 6,500 rpm. 4. It is equipped with Honda's i-VTEC technology and paired with a 5-speed automatic transmission. The 1.5L turbocharged engine variant produces 156 hp and a peak torque of 203 Nm, featuring direct injection technology, an aluminum cylinder head and block, and is paired with a CVT transmission.
Was this review help?
19
5
Share
More Forum Discussions

Where is the ECU located in a Chery A5?

Chery Tiggo 5's engine control unit (ECU) is located in the U-slot on the passenger side. Definition of automotive ECU: An automotive ECU is an electronic device that automatically processes input signals from various sensors according to predetermined programs, then outputs signals to actuators to control vehicle operation. Composition of automotive ECU: The main component of an automotive ECU is a single-chip microcomputer, which is a circuit board integrating microprocessor (CPU), memory, and input/output interfaces. The microprocessor serves as the core component - it converts input analog signals into digital signals, compares them with stored reference data for processing, calculates output values, and controls actuators after power amplification of output signals.
9
0
Share

Where is the ignition keyhole of the Baojun 510?

The ignition keyhole of the Baojun 510 is located on the right side of the steering wheel, which is a common position. It should be noted that some models come with a push-button start system, and these models do not have an ignition keyhole. Therefore, for push-button start models, you don't need to insert the key into the keyhole to start the car—simply press the brake and click the push-button start. The Baojun 510 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99 PS, a maximum power of 73 kW, and a maximum torque of 135 Nm, paired with a 6-speed manual transmission.
18
3
Share

Disconnect the Positive or Negative Terminal When Removing a Car Battery?

The correct removal procedure is to disconnect the negative terminal first. If the positive terminal is removed first, a short circuit may occur. A short circuit refers to the direct connection of the positive and negative terminals without any resistance. The phenomenon of sparking can occur for the following reasons: 1. If only the positive terminal is removed, a conductive metal object (such as a tool) coming into contact with the car body and the positive terminal will directly connect the positive and negative terminals, allowing a large current to flow and causing a short circuit. 2. If the negative terminal is disconnected first, no current will flow, so a short circuit will not occur unless a tool connects the positive and negative terminals together.
19
5
Share

Where are the positions of the accelerator, brake, and clutch?

The accelerator, brake, and clutch are located below the cockpit, arranged from left to right as clutch, brake, and accelerator. The functions of the clutch are: 1. Gradually increase the driving force of the car to allow for a smooth start; 2. Temporarily separate the engine and transmission for gear shifting; 3. Prevent overload of the transmission system; 4. Reduce torsional vibration impact from the engine, extending the lifespan of transmission gears. The function of the brake is to reduce speed or bring the vehicle to a stop. The functions of the accelerator are: 1. Control the engine speed by adjusting the pedal pressure; 2. The accelerator controls the carburetor to determine the engine's output power.
9
1
Share

What are the original tire specifications for the Audi A4L?

Audi A4L's original tire specifications are: 225/50R17, 245/40R18, 245/35R19. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. Mounted on metal rims, they support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee the vehicle's driving performance. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, fuel tank capacity 56L, and curb weight 1615kg.
12
5
Share

Is the Environmental Protection Label Still Required for Vehicle Inspection?

Vehicle inspection still requires the environmental protection label. Below are the specific details about annual inspection labels: 1. Inspection symbols: There are three types of labels affixed to the windshield: compulsory insurance label, annual inspection label, and environmental protection label. 2. Placement of inspection compliance labels as required: When driving on the road, vehicles must display license plates, place inspection compliance labels and insurance labels, and carry the vehicle driving license. Failure to place the inspection compliance label or insurance label as required will result in a fine and a deduction of 1 point. Forging, altering, or using another vehicle's insurance label will result in a fine and the vehicle being impounded.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.