···
Log in / Register

Where is the handbrake of the Reiz?

3 Answers
MacKaleb
09/02/25 2:00am
Toyota Reiz does not have a handbrake; it is equipped with a foot brake across all models. Below is more information about the Toyota Reiz: 1. The dimensions of the Reiz are 4750*1795*1450mm, with a wheelbase of 2850mm. 2. The Reiz is equipped with two powertrains: the Toyota 5GR-FE-V6 all-aluminum engine and the 3GR-FE-V6 all-aluminum engine. Both engines feature DOHC (Double Overhead Camshaft) and DUAL-VVT-i technology, with maximum power and torque outputs of 145 kW, 242 Nm and 170 kW, 300 Nm respectively. 3. The Reiz (REIZ) is the domestic name for the Japanese Toyota MARK-X model. It was produced in October 2005 at the Tianjin FAW Toyota Plant No. 2, sharing the production line and chassis with the Crown, and equipped with the same six-speed automatic transmission as the Crown.
Was this review help?
4
4
Share
SanKennedy
09/14/25 4:24am
I've driven the Toyota Mark X (Reiz) for several years, and its handbrake is usually hidden on the left side of the driver's seat, near the floor, resembling a small lever. It was quite tricky to find at first—I had to bend down or reach down to locate it. When parking, make sure to pull it tight and avoid leaving it too loose, otherwise the car might slide on a slope, which is dangerous. Regular maintenance is important; check the handbrake cable for wear periodically to ensure it lasts longer. If you're a new owner, I recommend exploring its location with a friend—it’s especially helpful for nighttime parking.
Was this review help?
11
5
Share
Expand All
JocelynDella
10/28/25 5:05am
From an automotive design perspective, the handbrake in the Reiz (Mark X) is typically a traditional mechanical type, positioned beside the driver's left leg for convenient operation without occupying excessive space. Some modern variants may feature an upgraded electronic button near the center console, but older Reiz models predominantly maintain this layout. When using it, remember to depress the foot brake before engaging the handbrake to ensure absolute safety. During rainy days or when parking on slopes, its clearly defined position helps minimize misoperation risks and prolongs component lifespan.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

How to Deal with a Flooded Car Body?

If the water level does not exceed one-third of the tire height, there is no need to worry too much. Just perform a simple inspection to eliminate potential hazards. If the water exceeds one-third of the tire height, promptly clean the soundproofing cotton. This is the threshold for determining whether post-flooding maintenance is required. If the water reaches the axle center or higher, it indicates the vehicle has experienced significant flooding, and various critical components inside the car need to be inspected.
19
2
Share

Does Keeping the Eco Mode On Damage the Car?

Keeping the fuel-saving Eco mode on for a long time has no impact on the engine. Here is some relevant information: 1. ECO: The name ECO is derived from the combination of Ecology, Conservation, and Optimization. From its inception, it has been designed with the fundamental concepts of technology, environmental protection, and economy. These three qualities have also become the consistent pursuit of the ECO intelligent engine family series. 2. Principle: The main principle of the ECO mode is not very complicated. It mainly involves comprehensive judgment and analysis of factors such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature that affect fuel consumption during vehicle movement. The ECU control unit calculates the optimal fuel amount to provide to the engine for operation, effectively reducing fuel consumption compared to normal driving mode. Simply put, it controls the engine speed with reasonable gear selection to reduce unnecessary fuel consumption.
12
3
Share

How to Deal with a Keyless Start Car Not Detecting the Key?

There are three solutions: turn the steering wheel left and right; shift the gear into P; replace the car key battery. The one-button start system is part of a smart car, a button device that simplifies the starting process and can also turn off the engine. This device is modified at the original car key lock position or installed as a separate panel. Below is relevant information about the one-button start system: 1. Precautions: Installing a car one-button start system mainly involves three points: the wiring plug under the ignition switch, the position of the button, and the handling of the steering lock. 2. Advantages: The vehicle has anti-theft and automatic warning functions, possessing all the features of anti-theft devices, as well as additional functions like automatic window closing and trunk opening controlled by a microcomputer.
13
4
Share

How to Brake with Handbrake and Gear Engagement?

The sequence for starting a car is to engage first gear, release the handbrake, slightly press the accelerator, and slowly lift the clutch. The sequence for stopping a car is to press the brake to bring the vehicle to a halt, shift to neutral, engage the handbrake, and turn off the engine before exiting. For automatic transmission vehicles, when parking, first shift into P (Park) mode, then firmly engage the handbrake. With automatic transmission models, it is acceptable to either engage the handbrake first or shift into P mode first when parking. For manual transmission models when parking, you can also press the clutch pedal first, then firmly engage the handbrake before shifting into neutral. The starting sequence is the same for both automatic and manual transmissions: first shift into gear, then release the handbrake. Once the gear is engaged, the power transmission path of the gearbox is connected. When first shifting into gear, the transmission is in first gear, where the torque is the highest. If the brake is not properly applied, the car may suddenly lurch forward. Below are some braking techniques for manual transmission cars: Braking in curves: Always brake before entering a curve to reduce speed, then accelerate when exiting the curve. If you need to brake while in a curve, adjust the braking force according to the vehicle's arc to avoid skidding or drifting. Smooth braking: Brake in advance by pressing the pedal slowly. As the vehicle comes to a stop, gradually release the brake until the vehicle halts completely, then release the brake entirely.
7
4
Share

Is the Annual Inspection for Commercial Vehicles Converted to Non-Commercial Vehicles Troublesome?

For commercial vehicles converted to non-commercial vehicles, the annual inspection follows the normal procedure and is not considered troublesome. Below are the relevant details: 1. Detail one: The vehicle undergoing a change in usage nature or transfer registration should be within 1 year of use (including 1 year), and the usage nature, ownership, or administrative region of registration must not be altered. 2. Detail two: If a commercial passenger vehicle and a non-commercial passenger vehicle are converted between each other in terms of usage nature, they will be subject to the scrappage regulations for commercial passenger vehicles, meaning mandatory scrappage after 8 years. According to the annual inspection regulations, vehicles within 5 years require inspection once a year, while those over 5 years require inspection every 6 months.
10
1
Share

What brand are the tires on the 2021 Buick Excelle?

The tires on the 2021 Buick Excelle are from the Maxxis brand. Below is relevant information about Maxxis: 1. Introduction: For over 40 years, Maxxis International has consistently provided high-quality tire products for passenger cars, light trucks, bicycles, motorcycles, ATVs, trailers, go-karts, and lawn mowers. Maxxis products are sold in over 170 countries, with business operations spanning Asia, Europe, and the Americas. With more than 30,000 employees worldwide, Maxxis is one of the largest and most respected tire companies in the world. 2. Company Honors: Maxxis Tires has always been fully dedicated to the automotive tire industry, sparing no effort in research and development to create products that continuously exceed customer expectations. With meticulous and down-to-earth enthusiasm, Maxxis Tires is writing its own legend and myth. Over the years, Maxxis Tires has received numerous awards and recognitions from international, national, regional, and professional organizations.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.