Where is the handbrake located in the Elysion?

2 Answers
MichaelFitz
07/29/25 1:10am
The Elysion only has a handbrake in its high-end models, which are equipped with an electronic handbrake located below the air vent on the left side of the driver's seat, making it very convenient to use. For the low-end models, there is no handbrake; instead, a foot brake is used, which is located to the left of the brake pedal. Here is some information about the Elysion: 1. In terms of dimensions, the Dongfeng Honda Elysion measures 4935/1845/1805mm in length, width, and height, with a wheelbase of 2900mm. 2. In terms of power, it is equipped with Honda's Earth Dreams Technology 2.4-liter direct-injection engine, with a maximum power output of 137 kW and a maximum torque of 243 Nm. 3. In terms of the transmission system, the Elysion is paired with the new-generation 'G-design-shift' CVT continuously variable transmission.
Was this review help?
2
2
Share
MacJayla
08/12/25 5:19am
When I first drove the Elysion, I was also curious about this. You can find the electronic parking brake on the center console. It's usually a small button with the letter "P" located on the upper part of the center console near the driver's right side, close to the driver's seat. It's quite convenient to operate—just press it lightly while stepping on the brake pedal to activate it. The close placement is designed for quick response to emergencies while driving, avoiding distractions. Actually, many cars now use electronic parking brakes instead of traditional mechanical levers, as they are safer and more reliable, less prone to jamming or being forgotten to release. I’d remind you to regularly check the electronic system’s functionality, like confirming it’s activated by the indicator light after parking to prevent rolling. Driving this kind of MPV is mostly for family trips, so having it well-positioned allows for more focused driving without affecting conversation, making it much safer. Overall, the design is simple and clear, making it hassle-free to use.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

What is the vehicle management office license plate selection process?

Prepare the required documents and wait in line for vehicle inspection. After the inspection, take the receipt to select a license plate number. The selection is random, with 10 groups of numbers, each containing 10 options. Choose one from them. Once selected, proceed to collect the license plate. Bring the receipt to the counter to pay 100 yuan. Obtain the vehicle registration certificate, then take the receipt to have the license plate installed.
12
4
Share

How to adjust the audio system of BYD Song Plus?

You can set the bass value to 8-9, the midrange value to 2-3, and the treble value to 5-6. The left-right balance can be adjusted to the middle position, and the front-rear balance can also be set to the middle position. When adjusting the car audio system, you can first turn off the midrange and treble of the front and rear channels, listen to the subwoofer separately, and adjust the crossover based on the sound. Control the ratio of mechanical noise to subwoofer properly, then reduce the rear channel volume before testing the subwoofer again.
9
0
Share

How to Operate the Great Wall Pao Automatic Transmission?

First, press the brake pedal and start the engine; do not release the brake pedal at this time, shift into D gear; release the brake pedal and the vehicle will move forward. When turning off the engine, press the foot brake to stop the car; shift the gear from D to P; pull up the handbrake; release the foot brake, turn back the key; turn off the power and pull out the key.
19
3
Share

How to Set Up Automatic Locking for RAV4

Hold down the ignition switch, press the lock button for about 5 seconds, and the hazard indicator will flash twice to indicate successful setup. If you confirm that your vehicle has an automatic locking function but it fails to activate automatically, you can adjust the settings through the car's onboard computer.
16
0
Share

How to install the timing for Haima Family 479q?

Use the positioning plate to clamp the positioning square on the camshaft to determine the precise position of the camshaft at the top dead center of the first cylinder. Insert the positioning pin into the positioning pin holes on the cylinder block and flywheel to fix the crankshaft in place. The connection between the camshaft timing pulley and the camshaft is secured with bolts, while the connection between the crankshaft timing pulley and the crankshaft uses positioning pins and bolts. Tighten the connecting bolts between the camshaft timing pulley and the camshaft, then remove the positioning plate and positioning pin to complete the installation of the timing wheel system.
4
1
Share

How to Get Insurance to Treat a Flood-Damaged Car as a Total Loss

There is no separate total loss standard for flood-damaged vehicles. Whether they are deemed a total loss follows the same criteria as vehicles damaged by other causes. When the repair costs exceed 80% or more of the vehicle's value, the insurance company will process the claim as a total loss. If the vehicle still fails to meet the national safety technical standards for in-use vehicles after repairs and adjustments, it must be declared a total loss.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.