Where is the handbrake located in a Hyundai car?

What does the flashing oil light on a Chevrolet Lova mean?

The flashing oil light on a Chevrolet Lova indicates low oil pressure or dirty oil. Here are the specific details: 1. Oil indicator light flashing: When the oil indicator light flashes, it means the oil pressure is low or the oil is too dirty, leading to reduced lubrication quality in the engine. This causes abnormal wear on the vehicle. In such cases, you should drive at low speed and have the lubrication system thoroughly checked at a 4S shop. 2. Oil pressure: An oil pressure warning indicates insufficient oil pressure, which is not the same as insufficient oil level. Even if the oil reaches the F mark, it only means there is enough oil. Oil pressure depends on the supply from the oil pump, which circulates oil through the engine's oil channels to all parts requiring lubrication. Oil is stored at the bottom of the engine, and the oil pump's power ensures lubrication reaches the top of the engine.

10

2

Share

The difference between Mobil 1 Silver Fashion Edition and Mobil 1 Silver?

The differences between Mobil 1 Silver Fashion Edition and Mobil 1 Silver are as follows: 1. Engine oil: Both Mobil 1 Gold and Mobil 1 Silver are fully synthetic oils, but Mobil 1 Gold contains more SUPERSYN formula, which is longer-lasting and has superior performance. The gold version is a fully synthetic oil with lower viscosity and higher quality. Mobil 1 Silver is much better than the original factory oil in terms of quality and provides better engine protection. 2. Origin: Mobil 1 Gold is packaged in Singapore, and most of it now comes from Japan. Mobil 1 Silver 5W30 belongs to the 5th generation formula and has average performance. 3. Fuel efficiency: In terms of fuel efficiency, Mobil 1 Silver is not as outstanding as Mobil 1 Gold. Mobil 1 Gold 5W30 and 0W40 are the top-tier Mobil 1 engine oils, with a relatively new formula, belonging to the 6th generation formula.

15

3

Share

How to adjust the high clutch of the Qashqai?

Methods to adjust the high clutch of the Qashqai: 1. Park the car under the lift, release the handbrake, locate the position of the chassis jacking point, and raise the lift foot to the position of the chassis jacking point; 2. Lift the vehicle, find the clutch location, and the clutch cable will appear next to the clutch; 3. Use a wrench to loosen one side of the screw. If the clutch is too low, loosen the left screw and tighten the right screw. If the clutch is too high, loosen the right screw and tighten the left screw towards the right. The Qashqai's body dimensions are 4401 mm in length, 1837 mm in width, and 1593 mm in height, with a wheelbase of 2646 mm. The Qashqai features front-wheel drive, with a front suspension type of MacPherson strut independent suspension and a rear suspension type of multi-link independent suspension, and the body structure is a unibody.

13

0

Share

Will drivers be penalized with points and fines for not yielding to pedestrians?

Drivers will be penalized with points and fines for not yielding to pedestrians. The specific details are as follows: 1. If a motor vehicle fails to stop and yield when encountering pedestrians crossing at a crosswalk, a fine of 50 yuan and 3 demerit points will be imposed. 2. If a motor vehicle fails to yield to pedestrians crossing the road on a street without traffic signals, a fine of 50 yuan and 3 demerit points will be imposed. 3. If a turning motor vehicle fails to yield to straight-going vehicles or pedestrians, a fine of 100 yuan and 3 demerit points will be imposed. The standards for motor vehicles yielding to pedestrians are as follows: 1. When pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, motor vehicles on the left side should slow down and may proceed through the crosswalk after ensuring safety. 2. When pedestrians are waiting outside the separation line of the motor vehicle lane and non-motor vehicle lane and have not entered the motor vehicle lane, motor vehicles A and B should slow down and may proceed through the crosswalk after ensuring safety. 3. If pedestrians cross the separation line of the motor vehicle lane and non-motor vehicle lane and enter the aforementioned areas, and motor vehicles A and B fail to stop and yield, this constitutes a violation and should be penalized. 4. After pedestrians enter the lane where motor vehicle A is located along the crosswalk, motor vehicle B should slow down and may proceed through the crosswalk after ensuring safety; if motor vehicle A fails to stop and yield, this constitutes a violation and should be penalized. 5. If pedestrians are waiting at the centerline of the road and have not entered the lanes where motor vehicles A and B are located, and motor vehicles A and B fail to stop and yield, this constitutes a violation and should be penalized. 6. If pedestrians cross the centerline of the road and enter the motor vehicle lane, and the motor vehicle fails to stop and yield, this constitutes a violation and should be penalized. 7. If the road center is separated by a green belt and pedestrians are waiting in the central waiting area, motor vehicles should slow down and may proceed through the crosswalk after ensuring safety.

1

2

Share

How long after a B2 downgrade can one apply for a B2 upgrade?

You can apply for an upgrade if there is no demerit record within one year. According to the Regulations on the Application and Use of Motor Vehicle Driving Licenses, Article 14: If you already hold a motor vehicle driving license and apply to add a permitted driving model, you must not have a record of 12 demerit points in this scoring cycle and the most recent scoring cycle before the application. Below is relevant information: 1. Situations where an upgrade is not allowed: Being held equally or more responsible for a traffic accident resulting in death; Driving under the influence of alcohol leading to license revocation or if the motor vehicle driving license has not been held for 10 years. 2. Vehicles that can be driven with a B2 license: A B2 license permits driving heavy-duty, medium-duty trucks or large, heavy, medium-sized special-purpose vehicles. Heavy-duty and medium-duty trucks are mostly trucks, such as the large trucks commonly seen on the road carrying construction waste, which belong to the heavy-duty truck category. Large, heavy, medium-sized special-purpose vehicles refer to vehicles equipped with special equipment or devices, such as water sprinklers, concrete mixers, fire trucks, etc.

6

0

Share

How Many Subjects Are There in the Driving Test and What Are They?

There are mainly 4 subjects in the driving test. Below are the basic details of each subject: 1. Subject 1 Test Content: Primarily covers basic knowledge such as road traffic safety laws and regulations, traffic signals and their meanings, and traffic rules. Evaluation Criteria: A total of 1,325 questions, with 100 randomly selected to form a test paper. Each question is worth 1 point, with a full score of 100. A passing score is 90, and the test duration is 45 minutes. 2. Subject 2 Test Content: Includes five mandatory items: reverse parking into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. Some regions may have additional items. Currently, except for the requirement to complete slope starting within 30 seconds, time limits for reverse parking and parallel parking are still in the pilot phase and not fully implemented. Evaluation Criteria: Full score is 100, with a passing score of 80 or above. Those who fail can retake once on the spot. If the retake is unsuccessful, they can reschedule the test after 10 days. 3. Subject 3 Test Content: Includes 16 driving skills such as vehicle preparation, starting, driving straight, gear shifting, changing lanes, parking by the roadside, going straight through intersections, turning left and right at intersections, passing crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and light simulation. Evaluation Criteria: Full score is 100, with a passing score of 90. A retake is allowed on the spot. If the retake is unsuccessful, the test can be rescheduled after 10 days. 4. Subject 4 Test Content: Mainly includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Like Subject 1, it is a theoretical test (computer-based). Evaluation Criteria: A total of 1,128 questions, with 50 randomly selected to form a test paper. Question types include true/false, single-choice, and multiple-choice. Each question is worth 2 points, with a full score of 100. A passing score is 90, and the test duration is 30 minutes.

13

2

Share

Where is the handbrake located in a Hyundai car?

What does the flashing oil light on a Chevrolet Lova mean?

The difference between Mobil 1 Silver Fashion Edition and Mobil 1 Silver?

How to adjust the high clutch of the Qashqai?

Will drivers be penalized with points and fines for not yielding to pedestrians?

How long after a B2 downgrade can one apply for a B2 upgrade?

How Many Subjects Are There in the Driving Test and What Are They?

How to Reset the Tire Pressure Monitoring on the Verano?

What Does Audi Mild Hybrid System Mean?

What is the speed corresponding to C1 gear?

What does the button 'a' in the car mean?