Where is the Haima M6 Air Conditioning Filter Located?

1 Answers
MacBrantley
07/29/25 10:06pm
The air conditioning filter of the Haima M6 is located inside the glove compartment on the passenger side. You need to remove the glove compartment to access it. More details about the Haima M6 are as follows: 1. As a mid-size car under the Haima brand, the Haima M6 has an overall length of 4700mm, a width of 1802mm, and a height of 1478mm, giving it a sporty appearance. The front grille features horizontal chrome trim with the brand logo embedded in the middle, presenting a bold and elegant look. The headlights on both sides resemble blades and use halogen bulbs. 2. The Haima M6 is equipped with a total of 6 airbags, including those for the driver, front passenger, side, and side curtain airbags, which is a rare safety feature in its class. Additionally, it comes with an ESP electronic stability control system and a reverse radar, highlighting the model's emphasis on safety. 3. In terms of power, it utilizes a self-developed platform by Haima, including a 1.6L NG116 engine with a maximum horsepower of approximately 118. The transmission is paired with a 5-speed manual gearbox. This model is also Haima's first to apply T-power technology.
Was this review help?
20
1
Share
More Forum Discussions

Can I switch to automatic transmission after failing the manual test four times?

After failing the manual transmission test four times, you can go to the driving test center to switch to automatic transmission for the final attempt. Additional information is as follows: Manual transmission: A manual transmission (MT), also known as a manual gearbox, requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed variation. Working principle: The pump wheel and turbine form a working pair, similar to two fans placed opposite each other. The wind from one fan drives the blades of the other, with the wind acting as the medium for kinetic energy transfer. If liquid replaces air as the medium, the pump wheel drives the turbine to rotate via the liquid. By adding a guide wheel between the pump wheel and turbine, a speed difference can be achieved through reaction forces, enabling variable speed and torque. Automatic transmission principle: Since the torque converter's automatic speed and torque variation range is insufficient, multiple planetary gear sets are connected in series behind the turbine to improve efficiency. The hydraulic control system automatically operates the planetary gears based on engine conditions, achieving automatic speed and torque variation. The auxiliary mechanism's automatic gear shifting cannot meet all driving needs, such as parking or reversing, so an intervention device, the manual shift lever, is included. It features markings like P (Park), R (Reverse), N (Neutral), and D (Drive), with additional "2" and "1" positions in Drive for starting or climbing slopes. The transmission range is divided into several gear ratio segments, with continuous variation only within specified segments, making AT a semi-automatic transmission between stepped and continuously variable types.
14
1
Share

Will You Definitely Be Caught Making a U-Turn Over Double Yellow Lines?

Making a U-turn over double yellow lines does not necessarily mean you will be caught. Here are specific details about being caught for making a U-turn over double yellow lines: Not being caught: If the section of the road where the vehicle makes the U-turn does not have electronic camera surveillance, the U-turn will not be recorded. Being caught: If the location where the vehicle makes the U-turn is monitored by electronic cameras, the vehicle's movement will be recorded, constituting a traffic violation. Traffic violations committed by motor vehicles can be handled through the mobile app "Traffic Management 12123" or directly at the vehicle management office or the traffic management department of the public security authorities. Regardless of the method used to address the traffic violation, it can be effectively resolved without affecting the normal use of the motor vehicle.
6
1
Share

Should the left lane yield to the right when two lanes merge into one?

When two lanes merge into one, it is not a case of the left lane yielding to the right, but rather yielding to vehicles traveling in the lane being merged into. Below are some important considerations for car driving: Cold engine warm-up: Proper warm-up helps form an "oil film" between engine components, reducing wear. Timely gear shifting: When driving a manual transmission vehicle during the break-in period, shift gears promptly and appropriately, avoiding incorrect behaviors like high gear with low RPM or low gear with high RPM, and don't use one gear for extended periods. Scheduled maintenance: Simply follow the manufacturer's recommendations in the vehicle manual - perform inspections and maintenance (including oil and filter changes) after reaching certain mileage or time intervals, along with a comprehensive chassis system check. Avoid emergency braking: Emergency braking not only impacts the breaking-in brake system but also increases stress on both the vehicle chassis and engine.
19
0
Share

What is the difference between 215 and 225 tires?

The differences between 215 and 225 tires are: different cross-sectional widths: the cross-sectional width of 215 tires is 215mm; the cross-sectional width of 225 tires is 225mm. In addition, the 215 tires have reduced grip and driving stability, as well as reduced friction, which results in lower fuel consumption and easier steering. However, the 225 tires, being wider, offer stronger stability and greater friction, which increases fuel consumption, but they provide better comfort compared to narrower tires. The functions of tires are: To support the entire weight of the vehicle and bear the load of the car; to prevent severe vibrations and early damage to car components; to transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and passability. When choosing tires, it is important to select the appropriate ones for the vehicle. For example, low-profile tires used in sports cars are not suitable for family cars. Generally, the tires that come standard with family vehicles already balance comfort and fuel economy. In addition to the model, tires also have the following common data marked on them: Tire carcass cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tires. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: indicates the rim size compatible with the tire.
11
2
Share

How to Choose Antifreeze for Winter?

In winter, you should choose antifreeze with a freezing point 10-15°C lower than the local average minimum temperature. Here are some details about antifreeze: 1. The full name of antifreeze is antifreeze coolant, which is a type of coolant containing special additives. In addition to preventing freezing, it also has excellent properties such as preventing scale and corrosion throughout the year. 2. It is mainly used in liquid-cooled engine cooling systems. It has the functions of preventing freezing in winter and boiling in summer, and can prevent the coolant from freezing and expanding the radiator or damaging the engine cylinder block when the vehicle is parked in cold winter. 3. Antifreeze can protect the engine's cooling system, improve heat dissipation, and enhance engine efficiency.
15
1
Share

What does ECU flashing mean?

ECU flashing, currently also known as ECU upgrade, automotive computer upgrade, or ECU modification in China, is in fact officially referred to as ECU tuning. Below are specific details about ECU: Components: It consists of a microcontroller (MCU), memory (ROM, RAM), input/output interfaces (I/O), analog-to-digital converters (A/D), as well as large-scale integrated circuits for shaping and driving. Operating Range: The ECU typically operates within a voltage range of 6.5-16V (with voltage stabilization devices at key internal points), a current range of 0.015-0.1A, and a temperature range of -40℃ to 80℃. Primary Function: It controls the vehicle's driving state and enables various functions. This is primarily achieved through data collection and exchange via various sensors and buses to determine the vehicle's state and the driver's intentions, then manipulating the vehicle through actuators.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.