Where is the gear shift button for the 2021 Classic Sylphy automatic transmission?

1 Answers
SanNora
07/29/25 2:32pm
2021 Classic Sylphy automatic transmission gear shift button is located next to the gear lever. Information about the Nissan Sylphy automatic transmission is as follows: Meaning: As the name suggests, the driver does not need to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Gear introduction: P stands for Parking gear, used when parking (when turning off the engine and for long-term idling parking); R stands for Reverse gear; N stands for Neutral gear, which has the same meaning as the neutral gear in manual transmission, used for temporary parking; D stands for Drive gear, under which the transmission will automatically switch between gears 1 to 5 based on speed and throttle conditions.
Was this review help?
13
2
Share
More Forum Discussions

What type of fuel should the Trumpchi M6 use?

The Trumpchi M6 should use 92-octane gasoline, as recommended in the vehicle's official user manual. In addition to checking the appropriate fuel grade in the user manual, you can also find it indicated on the fuel tank cap. Generally, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, those between 10.0-11.5 should use 95-octane gasoline, and those with higher compression ratios should use 98-octane gasoline. However, with the use of new technologies, the compression ratio alone cannot determine the required fuel grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the fuel grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If you occasionally use the wrong fuel grade for the Trumpchi M6, simply switch back to the correct grade after the current tank is used up. However, prolonged use of the wrong fuel grade can have the following effects: Using a higher-octane fuel in a vehicle designed for a lower grade will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. Using a lower-octane fuel in a vehicle designed for a higher grade can cause engine knocking. The significantly lower octane rating lowers the fuel's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance occurs during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine issues, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to engine seizure.
14
5
Share

Will I get points deducted for making a U-turn on a white dashed line?

Making a U-turn on a white dashed line is allowed and will not result in points deduction, provided there are no signs prohibiting U-turns or left turns, or separate U-turn signal lights. Vehicles can make a U-turn as long as it does not interfere with normal traffic flow and safety is ensured. Permissible situations for U-turns: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn is allowed. If there is a U-turn signal light, follow its instructions. In the absence of a signal light, make the U-turn based on the specific situation, ensuring it does not obstruct other vehicles or pedestrians. Intersections without explicit prohibitions: If there are no signs explicitly prohibiting U-turns or left turns, a U-turn is allowed. "No explicit prohibition" means the absence of signs like "No U-turn," "No left turn," or solid center lines, in which case you can safely make a U-turn. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones typically marked at intersections prone to congestion due to temporary stops, entrances of important facilities, or other designated areas. Stopping on these lines (including waiting at traffic lights) is a violation. Although parking is prohibited in yellow grid zones, U-turns are permitted as long as there are no central barriers—these zones are effectively "U-turn allowed" areas. Intersections with U-turn signal lights: This is straightforward—if there is a U-turn signal light, follow it. Only proceed with the U-turn when the light is green. When "No left turn" and "U-turn allowed" signs coexist: U-turns are permitted, but left turns are prohibited. Note that "No U-turn" is not the same as "No left turn." Points to note when making a U-turn: Observe road markings: If the line is solid, U-turns are strictly prohibited under any circumstances. Continue driving until you find a suitable spot. If there is a "No left turn" sign ahead, even if "No U-turn" is not mentioned, U-turns are not allowed at that intersection because U-turns inherently involve a left turn movement. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to oncoming traffic when making a U-turn. Proceed only if it does not disrupt the flow of straight-moving vehicles; otherwise, you will bear full responsibility for any accidents. Near intersection stop lines, lanes often have guiding arrows indicating permitted movements. Not all leftmost lanes have left-turn arrows—if a lane has a straight arrow, U-turns are prohibited even without explicit "No U-turn" signs. Making a U-turn on a crosswalk is also a traffic violation.
3
1
Share

Why does the electronic brake vacuum pump make noise when braking?

Electronic brake vacuum pump makes noise when braking because electric vehicles lack an engine, reducing the vacuum source originally provided by the engine intake manifold, necessitating the addition of an electric vacuum pump. Here are some extended details: 1. Function: It mainly extracts air from the vacuum booster in the braking system to enable the booster to provide actual assistance. Therefore, braking consumes the vacuum source inside the vacuum booster. 2. Reduced vacuum level: When the vacuum pressure sensor detects a decrease in the vacuum level inside the booster, it activates the vacuum pump, causing it to work and produce noise. Each brake application consumes vacuum, so every time the brake is pressed, the vacuum pump operates.
15
1
Share

How to Deal with Water Leakage in a Car Sunroof?

To address water leakage in a car sunroof, follow these steps: 1. Inspect the rubber seal and grooves of the sunroof for dirt such as sand, leaves, or small branches; 2. When using a high-pressure water gun to wash the car, avoid directly spraying water at the sealing ring around the sunroof, as this can cause the seal to deform under the high-pressure water stream, leading to potential water leakage over time; 3. Regularly check the sunroof sealing ring for signs of aging. During spring and autumn, clean the sealing ring with a damp sponge every season. Before long-term parking, thoroughly clean the sunroof with talcum powder to prevent the rubber seal from undergoing chemical changes and natural aging due to prolonged exposure to air.
15
3
Share

What engine does the Bestune T77 use?

Bestune T77 is equipped with a 1.5T engine, delivering a maximum output power of 124 kW and a peak torque of 258 N·m. For the transmission system, the Bestune T77 offers either a 5-speed manual or a 7-speed dual-clutch transmission. The vehicle dimensions are 4525mm in length, 1845mm in width, and 1615mm in height, with a wheelbase of 2700mm. Safety features of the Bestune T77 include: Auto Hold, automatic parking assist, electronic stability control, hill start assist, traction control, hill descent control, LED daytime running lights, streaming media rearview mirror, front parking radar, anti-lock braking system (ABS), side curtain airbags, brake assist, full LCD instrument panel, among others.
5
1
Share

What are the applications of diesel engines?

Various ground transportation vehicles (such as cars, tractors, diesel locomotives, etc.), machinery in mining, petroleum, construction, and engineering sectors, agricultural machinery, forestry machinery, and power stations extensively use internal combustion engines as their power source. Below are relevant introductions: 1. Water transportation: Can serve as the main and auxiliary engines for inland and marine vessels. In aviation, some small civil aircraft still use internal combustion engines for power. 2. Wide usage: Internal combustion engines are also widely used in military equipment, such as tanks, armored vehicles, infantry fighting vehicles, heavy weapon tractors, and various surface ships and submarines, where they are extensively utilized.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.