···
Log in / Register

Where is the gasoline filter of Volvo S90 located?

4 Answers
Geoffrey
08/28/25 4:30am

The gasoline filter of this car is located on the firewall behind the engine compartment. Introduction to the oil filter: The oil filter is a component that filters the engine oil. Engine oil contains a certain amount of gum, impurities, water, and additives; during engine operation, metal shavings generated by friction between parts, impurities from the intake air, and oxides in the oil are all filtered by the oil filter. If the oil is not filtered and directly enters the oil circuit, it will adversely affect the engine's performance and lifespan. Removal of the oil filter: Open the engine hood, unscrew the oil cap, locate the oil pan, find the nut on the oil pan, loosen it with a wrench, and place a waste oil bucket underneath to catch the black waste oil. Once the waste oil has completely drained, use a specialized tool to remove the oil filter.

Was this review help?
5
5
Share
IsabellaMarie
09/10/25 3:00am

To be honest, as someone who frequently performs DIY car maintenance, I think the fuel filter of the Volvo S90 is most likely hidden inside the fuel tank. Most modern cars are designed this way, mainly to prevent dust and contaminants from entering the engine. You'll need to lift the rear seat cushion or trunk floor to access the fuel tank cover, as it's usually integrated with the fuel pump. Replacing it is a bit troublesome, but checking it every 20,000 kilometers can prevent engine shaking or starting issues. Remember, don't operate in dusty environments, and make sure the engine has cooled down before starting—safety first. Last time I changed it, I saved a few hundred dollars in labor costs, but if you're not familiar with the process, it's better to go to a professional shop. After all, the S90 is a premium car, and you don't want to risk damaging it.

Was this review help?
20
4
Share
Expand All
VonFaith
10/24/25 3:48am

Speaking from my experience as a novice car owner, the gasoline filter of the Volvo S90 is most likely located under the chassis or inside the fuel tank. The exact position depends on the model year. Newer models often have it built into the fuel tank, requiring the fuel pump module to be disassembled for access, while older models may have it externally mounted near the rear wheels under the chassis. Its function is to filter impurities from the gasoline, preventing clogging of the fuel injectors. I recommend checking it every 15,000 to 20,000 kilometers; otherwise, fuel efficiency will drop, and the car will feel sluggish. If the car has difficulty starting or experiences jerky acceleration, the filter might be clogged. If you plan to replace it yourself, prepare gloves and tools, but since the S90 has a low chassis, it's best to use a jack to lift the car for the operation to avoid scratching the paint.

Was this review help?
19
1
Share
Expand All
ODaniela
12/07/25 4:12am

I've been driving the S90 for several years. The fuel filter is usually located inside the fuel tank and connected to the fuel pump, which provides maximum protection for the engine. Replacing it isn't too complicated, but requires some patience—you need to drain the fuel from the tank and remove the cover to access the filter component. Why is it designed this way? To minimize the risk of external contamination. Don't forget, regular maintenance of this part can improve fuel efficiency. I replace mine every 20,000 kilometers, and it takes about half an hour to complete.

Was this review help?
5
0
Share
Expand All
More Forum Discussions

What is the best installation location for adding an inverter to a car?

The best installation location for adding an inverter to a car is inside the car's cigarette lighter socket. Here are the relevant details: 1. Car inverter: (Switch power converter, Power-Inverter) is a device that can convert DC12V direct current into AC380V alternating current with the same voltage, for use by general electrical appliances. It is a convenient vehicle power converter. 2. Precautions: To ensure safety, it is recommended that when using a high-power inverter, the ground wire clip should be attached to some metal material connected to the wall or the ground to prevent leakage or generate static electricity.
13
3
Share

Is the Audi Q5L a Class C or B?

The Audi Q5L is a Class B vehicle. Below are the relevant details about the Audi Q5L: 1. Exterior: It adopts Audi's new design language, with changes to the headlights and grille style, giving it a more youthful and sporty appearance overall. The new model will continue to offer two different exterior styles for consumers to choose from. The dimensions of the Audi Q5L are 4770mm in length, 1893mm in width, 1667mm in height, with a wheelbase of 2907mm. 2. Configuration: In addition to featuring leather seats in lower trim models, it also includes dual-tone seats, ambient lighting, and other configurations. For the driving system, it adds features such as panoramic imaging, intelligent parking, and side assist. 3. Powertrain: The Audi Q5L still utilizes two power variants of the 2.0T engine—low and high power. The low-power version delivers 140kW and 320N·m of torque, while the high-power version offers 185kW and 370N·m of torque, paired with a 7-speed dual-clutch transmission.
3
3
Share

What does the Audi emergency braking warning system indicate?

Audi emergency braking warning system may appear due to reasons such as damaged warning system sensors, radar system failure, or issues with the warning control system. Below are detailed explanations: 1. Audi Basic Occupant Protection System: Tightens seat belts and allows reversible adjustment of front seat belts; If vehicle control is insufficient or excessive, windows and sunroofs close leaving only a small gap; Activates hazard warning lights. The Audi Basic Occupant Protection System is activated when the vehicle speed exceeds 30 km/h. 2. Audi Front Occupant Pre-Safe System: The Audi Front Occupant Pre-Safe System includes all functions of the Audi Basic Occupant Protection System. Additionally, it calculates the possibility of rear-ending the vehicle ahead under system constraints. When a collision risk is detected, the following devices are triggered: Adjusts the electric headrests, head restraints, and pneumatic side bolsters on the front and outer rear seats.
17
3
Share

How to Install a License Plate?

The method for installing a license plate is as follows: On the front and rear of the car, you can see fixed points where the license plate is to be mounted. All fixing screw components must be tightened without any gaps. Once the license plate is in the correct position, tighten all the screws, but do not apply excessive force. The screws should not come loose and should be firm with slight pressure. Align the cap with the spacer and press it inward, applying slight pressure to secure the cap in place. Note that once the screws and caps are fixed, they cannot be removed. License Plate Introduction: License plates, commonly known as vehicle plates, refer to the plates hung on the front and rear of a vehicle. License Plate Materials: The commonly used materials are aluminum, iron, plastic, or paper, on which the vehicle's registration number, registration region, or other relevant information is engraved.
20
4
Share

How Many Years Is a New Car Exempt from Inspection?

New cars fall under the 6-year inspection exemption policy. However, according to national regulations, owners still need to visit the vehicle management office every 2 years to apply for an annual inspection sticker. Failure to obtain this sticker is equivalent to not having the vehicle inspected. Certain documents are required to apply for the exemption. For private vehicles over 10 years old, the original inspection cycle still applies: once a year for vehicles aged 10 to 15 years, and every six months for vehicles over 15 years old. According to the opinions on strengthening and improving motor vehicle inspection work issued by the Ministry of Public Security and the General Administration of Quality Supervision, Inspection and Quarantine, non-operational passenger cars and other small and mini passenger vehicles within 6 years are exempt from inspection on a trial basis. The exemption policy applies to non-operational passenger cars and other small and mini passenger vehicles, excluding vans and vehicles with 7 or more seats. If an operational motor vehicle passes the safety technical inspection within the specified inspection period, it does not need to undergo a repeat safety technical inspection.
20
2
Share

What procedures need to be completed after paying off the car loan?

After paying off the car loan, you need to complete the vehicle release of mortgage procedures. When purchasing a car with a loan, the "Motor Vehicle Registration Certificate" (commonly known as the green book) is mortgaged to the lending institution, while the vehicle itself and the vehicle license remain in the owner's possession. Many people mistakenly believe that simply repaying the loan is sufficient, but in reality, it's necessary to visit the lending institution to complete the release of mortgage procedures and retrieve the green book. The materials required for the vehicle release of mortgage procedures include: 1. Vehicle Registration Certificate; 2. Original "Motor Vehicle Mortgage Registration or Pledge Filing Application Form" with the mortgagee's official seal; 3. Identity documents and copies of both the vehicle owner and the mortgagee; 4. Power of attorney from the mortgagee with an official seal.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.