Where is the gasoline filter located on the Changan CS75?

Is It Overloading to Have Five Adults and One Child?

For vehicles with a rated seating capacity of six or more, it is not considered overloading. However, for a sedan carrying five adults and one child, it is considered overloading. Below is more information about overloading: 1. Reason: Overcrowding does not specify any regulations regarding the height, weight, or age of passengers. This means that as long as they meet the definition of a human being, even an infant counts as a complete individual. If a car is rated for five people, having an extra one-month-old baby would still be considered overloading. 2. Legal Basis: According to Article 92 of the Road Traffic Safety Law, if a passenger vehicle exceeds its rated passenger capacity, a fine of 200 to 500 RMB will be imposed; if it exceeds the rated passenger capacity by 20% or carries cargo in violation of regulations, a fine of 500 to 2,000 RMB will be imposed. If a freight vehicle exceeds its rated load capacity, a fine of 200 to 500 RMB will be imposed; if it exceeds the rated load capacity by 30% or carries passengers in violation of regulations, a fine of 500 to 2,000 RMB will be imposed. 3. Consequences: If a transport unit's vehicle falls under the situations described in the first or second clause and fails to rectify the issue after being penalized, the directly responsible supervisor will be fined 2,000 to 5,000 RMB.

20

4

Share

What Inspections Should Be Done Before Driving on the Highway?

Before driving on the highway, it is necessary to inspect the vehicle's condition, including the fuel gauge, tire pressure, lights, brakes, and other aspects, as well as checking the spare parts. Here are some specific items to inspect before highway driving: 1. Check the fuel level: When driving on the highway, fuel consumption is higher than expected. For example, a car with a fuel consumption of 10 liters per 100 kilometers will consume about 10 liters when driving at 50 km/h for 100 kilometers. However, when driving at 100 km/h on the highway for the same distance, it will consume approximately 16 liters. Highway driving significantly increases fuel consumption, so ensure you have sufficient fuel. 2. Check the tire pressure: While driving, tires undergo compression and expansion, known as tire deformation. This phenomenon is more pronounced when tire pressure is low and speed is high. Under such conditions, the internal temperature of the tire rises abnormally, leading to separation of the rubber layers or fragmentation of the outer tread, which can cause a blowout and result in an accident. Therefore, before highway driving, the tire pressure should be slightly higher than usual. 3. Others: Inspect other components such as engine oil, coolant, fan belts, steering, transmission, lights, and signals.

4

Share

What does AQS in car air conditioning mean?

Car air conditioning's AQS refers to the Air Quality Sensor in the vehicle. This sensor can detect air turbidity, humidity, and the presence of toxic substances, thereby controlling the air conditioning's internal and external circulation. The AQS system is highly sensitive to vehicle exhaust. During traffic congestion in urban areas, the AQS system will automatically close the external circulation and switch to internal circulation. Cars equipped with the AQS system usually come with automatic air conditioning, which is more intelligent than standard car air conditioning. When driving at high speeds, it's not suitable to open windows for ventilation, so the external circulation function of the air conditioning can be activated. In urban driving, when encountering traffic jams or areas with high dust levels, the internal circulation of the air conditioning should be used. The car's air conditioning system should be cleaned at least once a year. Otherwise, bacteria can proliferate inside the system, and the air blown out when the air conditioning is turned on may have an unpleasant odor. The air conditioning filter should also be replaced regularly to prevent bacterial growth and odors. If the air quality in your area is poor, you can replace the standard air conditioning filter with one that filters PM2.5 particles. This way, even when the external circulation is activated, there's no need to worry.

3

0

Share

Which Side of the Spare Tire Should Face Outward During Installation?

When installing a spare tire, the side marked 'inside' should face inward, and the side marked 'outside' should face outward. Relevant information about spare tires is as follows: 1. Spare Tire: It is an extra tire prepared for a car in case of a flat or other tire issues, serving as a temporary replacement. 2. When using a spare tire: The maximum speed is lower than that of a standard tire, and it is advisable to replace it with a standard tire as soon as possible upon reaching the destination. This is usually indicated in prominent multilingual labels. Types of spare tires include: 1. Full-size Spare Tire: A full-size spare tire has the same specifications as the other four tires on the vehicle and can replace any temporarily or permanently unusable tire. 2. Compact Spare Tire: This type of spare tire has a slightly smaller diameter and width compared to the other four tires, making it suitable only for temporary use on non-driving wheels, with a maximum speed not exceeding 80 km/h. 3. Run-flat Tire: Also known as a 'safety tire' or commonly referred to as a 'run-flat tire,' it is professionally termed as 'tire with run-flat capability.' Compared to regular tires, run-flat tires do not lose air or lose air very slowly when punctured, maintaining the driving profile and keeping the tire bead fixed on the rim, allowing the car to drive to a service station safely for an extended period or temporarily.

12

4

Share

How many days does it take to check the violation information for running a red light in Beijing?

If you go to the vehicle management office or traffic police team to inquire, you can check the next day; if you check online, it will take 3-7 days; if you wait for an SMS, you will generally receive it within 10 days. Common ways to check for running a red light are as follows: You can check for running a red light through the "Traffic Management 12123" APP. After opening it, log in with your ID card, then find and click on the illegal handling option. In the illegal handling section, you can see the current status of your vehicle. If there is a violation, the specific content of the violation will be displayed. Go to the office hall of the traffic branch teams in various districts and counties of each city to check through touch query terminals. Log in to the external service website of the Public Security Traffic Management Bureau of each city: find the vehicle violation query, enter the license plate number and vehicle engine number, and click to query. Article 2, Paragraph 1, Item 2 of the "Scoring Standards for Road Traffic Safety Violations" stipulates that driving a motor vehicle in violation of road traffic signal lights will result in 6 points deducted at one time. Article 3, Paragraph 1, Item 8 stipulates that driving a motor vehicle in violation of prohibition signs or prohibition line instructions will result in 3 points deducted at one time.

5

1

Share

What Vehicles Can a G License Drive?

G license is an agricultural machinery license, which only permits driving tractors. After May 1, 2004, with the implementation of the Road Traffic Safety Law, the new driver's license no longer includes the G category. The G license is issued by agricultural machinery supervision departments, while the C license is a nationally recognized regular driver's license issued by public security traffic management departments. These two licenses belong to different authorities and should not be confused. According to Article 8 of the 'Tractor and Combine Harvester Driver's License Management Regulations,' the types of machinery that tractor and combine harvester drivers are permitted to operate are classified as follows: Wheeled tractor, code G1; walking tractor, code K1; crawler tractor, code L; wheeled tractor transport unit, code G2 (permitting operation of wheeled tractors); walking tractor transport unit, code K2 (permitting operation of walking tractors); wheeled combine harvester, code R; crawler combine harvester, code S. Article 12 of the 'Tractor and Combine Harvester Driver's License Management Regulations': First-time applicants for a driver's license shall fill out an application form and submit the following materials: the applicant's identity proof; physical condition proof. Article 13: Applicants seeking to add permitted machinery types shall apply to the agricultural machinery supervision authority at the place of license issuance or residence, fill out an application form, and submit the driver's license and the materials specified in Article 12 of these regulations.

17

3

Share

Where is the gasoline filter located on the Changan CS75?

Is It Overloading to Have Five Adults and One Child?

What Inspections Should Be Done Before Driving on the Highway?

What does AQS in car air conditioning mean?

Which Side of the Spare Tire Should Face Outward During Installation?

How many days does it take to check the violation information for running a red light in Beijing?

What Vehicles Can a G License Drive?

What Causes the XRv Tire Pressure Yellow Light to Illuminate Unexpectedly?

How Does the Insurance Company Compensate for a Damaged Car?

What Causes No Airflow from the Rear Air Conditioning in a Lexus?

How many points will be deducted for a child sitting in the front passenger seat?