Where is the GAC Trumpchi factory located?

1 Answers
VanArthur
07/30/25 12:20am
GAC Trumpchi (abbreviated as Trumpchi) is produced by Guangzhou Automobile Group Co., Ltd. and currently has four factories: the Guangzhou Panyu Factory, the Urumqi Factory in Xinjiang, the Hubei Factory, and the Hangzhou Factory. Below is an introduction to GAC Trumpchi: 1. Overview: GAC Trumpchi (abbreviated as Trumpchi) is a domestic brand created by GAC Group to enhance core competitiveness and achieve sustainable development. In December 2010, the first model, the Trumpchi GA5 sedan, was successfully launched in the market, followed by multiple models. In 2017, GAC Trumpchi's sales reached 508,600 units, a year-on-year increase of 37%. GAC Trumpchi has the capability to compete with joint-venture brands and imported brands of the same level in terms of technology, configuration, and quality. As a pioneer among independent brands, it continues to impact the mid-to-high-end market. 2. Marketing Network: GAC Trumpchi has established sales and service channels in 14 countries, including Kuwait, the UAE, Chile, Cambodia, and Nigeria, and plans to enter the North American market in 2019. The Trumpchi GS4 and Trumpchi GS7 made their global debut at the North American International Auto Show, becoming the first Chinese brand to enter the main exhibition hall in the 110-year history of the show and the first Chinese automotive brand to participate in the National Automobile Dealers Association (NADA) conference. 3. Safety Ratings: In the C-NCAP crash safety performance tests, the Trumpchi GS8, Trumpchi GS5, Trumpchi GS3, Trumpchi GA8, Trumpchi GA6, Trumpchi GA5, and Trumpchi GA3 all received the highest five-star safety ratings.
Was this review help?
10
3
Share
More Forum Discussions

What kind of engine oil is used for Changan CS55?

Changan CS55 uses 5w40 or 0w40 fully synthetic engine oil, with an oil capacity of approximately 4L. The Changan CS55 is a compact SUV under Changan Automobile, with body dimensions of 4500mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2650mm. In terms of power, the vehicle is equipped with a 1.5T turbocharged all-aluminum engine, model JL476ZQCD, with a maximum power output of 115kw and a peak torque of 225nm. The transmission system is matched with a 6-speed manual or 6-speed automatic transmission. The body colors are primarily Dynamic Red and Starry Blue.
1
5
Share

Under What Circumstances Does a Vehicle Need a Wheel Alignment?

Circumstances under which a vehicle needs a wheel alignment: 1. When the vehicle has traveled 20,000 kilometers or one year, whichever comes first, a wheel alignment must be performed; 2. If you need to grip the steering wheel tightly to keep the vehicle from veering off course while driving straight on a flat road, a wheel alignment check is necessary; 3. If the vehicle feels unstable or floats during normal driving, similar to when turning or driving on rough roads, it is recommended to check and perform a wheel alignment; 4. If one side of the front or rear tires shows significant wear, a wheel alignment is also needed; 5. After installing new tires or following a collision, steering, or suspension system repair, it is advisable to perform a wheel alignment. Wheel alignment is based on the vehicle's four-wheel parameters and involves adjustments to ensure optimal driving performance and reliability.
3
5
Share

Is the Atz Engine Imported?

The Atz engine is imported from Japan. The Atz is equipped with 2.0 and 2.5 naturally aspirated engines, which incorporate Mazda's Skyactiv Technology. Compared to traditional naturally aspirated engines, the new Atz comes standard with features such as an intelligent idle stop system and brake energy regeneration system. The Atz 2.5L model accelerates from 0 to 100 km/h in just 8.3 seconds. The vehicle is fitted with high-performance MacPherson strut front suspension and multi-link rear suspension, which have been structurally optimized to achieve both weight reduction and increased rigidity. The car measures 4870mm in length, 1840mm in width, and 1445mm in height, with a wheelbase of 2830mm.
15
1
Share

How to Replace Engine Spark Plugs?

Method for replacing engine spark plugs: 1. Prepare the necessary tools for disassembly, including 10mm, 14mm, and 16mm sockets, a long extension bar, a ratchet wrench, a magnetic pickup tool, and a rag; 2. After the engine has completely cooled down, unplug the ignition coil connector, then use a 10mm socket to remove the mounting bolts. Once the ignition coil is removed, you can see the spark plug in the cylinder; 3. Depending on the size of the spark plug nut, use either a 14mm or 16mm socket with a long extension bar to loosen it by turning counterclockwise. Once loosened, use the magnetic pickup tool to remove the spark plug; 4. After removing the spark plug, if you don't install a new one immediately, reinsert the ignition coil or plug the spark plug hole with a rag to prevent dirt from falling in; 5. Use the magnetic pickup tool to hold the new spark plug and insert it into the hole, then reassemble following the reverse steps mentioned above. The torque for tightening the spark plug should not be too high, approximately 20Nm is sufficient; 6. After replacing all spark plugs, start the engine to check if they are functioning properly.
13
4
Share

Is a Wheel Alignment Necessary After Tire Replacement?

After replacing tires, a wheel alignment is not necessary, but wheel balancing is essential, which is unrelated to wheel alignment. If the vehicle does not pull to one side while driving and the steering wheel remains straight, alignment is not required. However, wheel balancing is mandatory; otherwise, vibrations may occur during driving. A car's wheel is an assembly consisting of the tire and the rim. Due to manufacturing variations, the mass distribution of this assembly may not be perfectly uniform. When the wheel rotates at high speeds, this can lead to dynamic imbalance, causing wheel vibrations and steering wheel shudder during driving.
5
2
Share

How to adjust the front and rear seats of the Haval H6?

The front and rear adjustment of the Haval H6 seats is done through electric adjustment buttons, and the height can also be adjusted. The rear seats can adjust the angle of the backrest. There is a pull ring on both sides of the rear seats; manually pull the ring and then move the seat to adjust the angle of the backrest. The rear seats cannot be adjusted for height, but the pull rings on the seats allow the rear seats to be fully reclined. The electric seats consist of a seat cushion, backrest, headrest, frame, suspension, and adjustment mechanism. They can be adjusted with buttons without changing the sitting posture, making the adjustment process convenient. The Haval H6 has dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, with a wheelbase of 2738mm.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.