Where is the fuse of Changan Eado located?

1 Answers
LydiaRose
07/29/25 9:29pm
Changan Eado's fuse is located in the fuse box within the engine compartment. Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. They are commonly used for overcurrent protection in automotive circuits and also for overcurrent protection in industrial equipment. Below are precautions for replacing fuses: 1. Replace the fuse according to the rated current value indicated on the fuse box cover. Do not use a fuse with a higher rated current. 2. If the new fuse blows immediately, it indicates a possible fault in the circuit system, and it should be inspected and repaired as soon as possible. 3. In the absence of a spare fuse, you can replace it with a fuse from other equipment that does not affect driving and safety. 4. If a fuse with the same current load cannot be found, you can use one with a lower rated current than the original fuse.
Was this review help?
7
4
Share
More Forum Discussions

How to Replace an Angle Valve?

Replacing an angle valve involves the following steps: Turn off the water supply by closing the main valve, then remove the metal hose connected to the angle valve by turning it counterclockwise. Use a specialized wrench to grip the triangular position of the angle valve and turn it counterclockwise to remove. Avoid using excessive force during removal. Once removed, install the new angle valve. An angle valve, also known as an angle stop valve, is similar to a ball valve, with its structure and characteristics derived from modifications of the ball valve. The key difference is that the outlet and inlet of an angle valve form a 90-degree right angle. Angle valves are also referred to as triangle valves, angle-shaped valves, or corner water valves, named for the 90-degree turn the pipeline makes at the valve.
9
2
Share

What brand of car is ranqerover?

ranqerover is the Land Rover Range Rover, which is one of the world's top four-wheel-drive luxury car models today. Advantages of the Land Rover Range Rover: The Land Rover Range Rover maintains its classic boxy design, with its greatest strengths being spacious interiors, excellent handling, and fuel efficiency. It comes with three different engines, each with its own advantages, providing ample power and enhancing the experience for both passengers and drivers. Car Performance: In terms of off-road capabilities, the new Range Rover's body rigidity is more than double that of the previous generation, with improved approach angles and ground clearance. Its air suspension system can adjust the vehicle height from a minimum of 208mm to a maximum of 281mm. Although it features a rare four-wheel independent suspension system for an off-road vehicle, the manufacturer states that the suspension travel is 50mm and 100mm more than the previous generation's non-independent suspension, showcasing the engineering achievements of the new model.
2
2
Share

What is the method for replacing the reverse light on the Changan CS35?

Changan CS35 reverse light replacement method is: 1. Disconnect the power supply and remove the dust cover on the back of the light; 2. Press the rotating handle at the rear of the light and unscrew it; 3. Replace with a new light, and after installation, reattach the dust cover. Taking the 2017 Changan CS35 as an example, it belongs to the small SUV category, with body dimensions of: length 4170mm, width 1810mm, height 1670mm, and a wheelbase of 2560mm. The 2017 Changan CS35 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 125PS, maximum power of 92kW, maximum torque of 160Nm, and is paired with a 5-speed manual transmission.
6
5
Share

What brand is the engine of the Geely Boyue Pro?

The engine of the Geely Boyue Pro is a Boyue brand engine, which is independently developed. The transmission comes from the DSI 6AT automatic transmission, and its power performance is excellent. Taking the 2020 Geely Boyue Pro as an example, it belongs to the compact SUV category. Its body dimensions are: length 4544mm, width 1831mm, height 1713mm, with a wheelbase of 2670mm, a fuel tank capacity of 58 liters, and a curb weight of 1685kg. The 2020 Geely Boyue Pro features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum torque of 300Nm, paired with a 7-speed dual-clutch transmission.
14
5
Share

Which BYD models have Chinese characters in their names?

BYD models with Chinese characters in their names include the BYD Qin, Tang, Song, and Yuan. Appearance: The BYD Song features a hexagonal large-sized grille with horizontal dot-matrix elements inside. The headlight design is sharp, paired with a sporty front bumper. The side profile of the new car showcases smooth lines, with folded-line treatments on the side skirts and wheel arches, complemented by exquisite multi-spoke alloy wheels. The rear lights adopt a full-width design, with a slim chrome trim in the middle and a stylish silver underguard at the bottom. Powertrain: The BYD Song fuel version is equipped with a 1.5T turbocharged engine, delivering a maximum power of 185 horsepower. The pure electric version will feature BYD's third-generation permanent magnet synchronous motor, available in two different calibrations with maximum power outputs of 163 horsepower and 184 horsepower respectively. For the battery, the new car will use a lithium iron phosphate battery pack, offering maximum ranges of 405 kilometers and 505 kilometers.
1
4
Share

Where to Position the Jack?

Position the jack on the raised section of the side rail closest to the tire being replaced. Before lifting, align the grooved end of the jack with the designated point and loosen the lug nuts of the tire to be removed by one turn. The steps for using a jack are: 1. Retrieve the car jack from the vehicle; 2. Locate the jacking point beneath the side door panel; 3. Place the jack at the designated support point; 4. Use the crank to raise the jack—clockwise to lift, counterclockwise to lower. Precautions for jack usage include: 1. Secure the vehicle to prevent instability after lifting; 2. Implement proper safety warning measures; 3. Assess ground conditions and choose a stable surface for jack placement; 4. Check the jack's weight capacity; 5. Align with the vehicle's chassis support points; 6. Place a spare tire under the car for additional safety; 7. Perform lifting operations steadily and slowly.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.