Where is the fuse of Baojun 360 located?

Should You Release the Accelerator When Shifting from D to L Gear?

When shifting from D to L gear, you should release the accelerator. This is because the automatic transmission in a car relies on hydraulic pressure for power transfer. During driving, the engine generates a certain load, and shifting gears under load can negatively impact the vehicle. An automatic transmission refers to a system where the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The correct method to start an automatic transmission car is: 1. Fasten the seatbelt, insert the key, and turn it clockwise to the first position to initiate the vehicle's self-check; 2. After the self-check is completed, turn the key clockwise to the second position, shift into D gear, and release the handbrake and foot brake.

7

0

Share

What does the 205/55r16 tire mean?

205/55r16 is the specification size of a tire, representing a tire section width of 205 millimeters, an aspect ratio of 55, 'r' indicating a radial tire, and 16 meaning it can be mounted on a 16-inch rim. Tire maintenance methods are as follows: 1. Inspection: Pay special attention to the condition of the tires, checking for any debris or foreign objects lodged in them. If found, clean them promptly. If not removed in time, some may automatically fall off during driving, while others may gradually 'erode' the tire, penetrating deeper over time. When reaching a certain extent, they can puncture the tire, leading to rupture, blowout, or air leakage, posing potential dangers. 2. Timely Replacement: During inspection, if the tire valve is found to be made of rubber and has turned dark red, it indicates aging and an inability to maintain good airtightness. Replacement is advisable. 3. Check Balance: During driving, experiences such as collisions, high-speed driving, sharp turns, emergency braking, or crossing obstacles may cause the tire to lose balance. This can result in vehicle deviation, bumpiness, or uneven tire wear (commonly known as 'tire cupping'), affecting driving safety. 4. Check Tire Pressure: Monitoring tire pressure is the most crucial aspect of daily tire maintenance. It is advisable to develop a good habit of checking tire pressure regularly (preferably once a week) to eliminate potential safety hazards in their early stages. Tire pressure should be checked when the tires are cold. This is because driving heats up the tires, increasing the pressure above the actual value. If the pressure of a hot tire is reduced, it will be insufficient once cooled.

20

2

Share

Where to Obtain the Annual Inspection Decal for a New Car?

New car annual inspection decals can be obtained at the vehicle management office and inspection stations designated by the vehicle management office. Nowadays, vehicles can be inspected nationwide, eliminating the need for owners to spend considerable time returning to the registration location. Vehicles can be directly inspected and qualified decals can be applied for in areas other than the registration location, without the need for an out-of-region inspection authorization letter. Vehicle annual inspection refers to a mandatory test for vehicles that have obtained official license plates and registration certificates, equivalent to an annual physical examination for the vehicle according to the safety technical conditions for motor vehicle operation. Its purposes are: 1. Timely elimination of potential safety hazards in vehicles; 2. Encouragement of enhanced vehicle maintenance; 3. Reduction of traffic accidents.

10

5

Share

Why Does Car Glass Frost Over?

Car glass frosts over due to the temperature difference between the inside and outside of the vehicle. When the interior temperature is higher than the outdoor temperature, the car glass comes into contact with the colder external environment, causing moisture inside the cabin to condense on the glass and form frost. Solutions to remove frost from car glass include: 1. Applying anti-fog spray; 2. Using the air conditioning's cooling and dehumidifying function to reduce air humidity; 3. Utilizing the air conditioning's warm air function to minimize the temperature difference and eliminate frost on the windows. Methods to prevent car glass from frosting over include: 1. Applying soapy water, detergent, ethylene glycol, glycerin, or polyvinylpyrrolidone; 2. Coating with thick plastic film and silicon, followed by hydroxyethyl methacrylate siloxane; 3. Applying a solution of carboxymethyl cellulose and salt onto the glass.

12

2

Share

What to Do When a Car's Wheels Run Out of Alignment?

The solution for a car's wheels running out of alignment is: perform a four-wheel alignment, check if the tire pressure is normal. If the alignment is not the issue, it might be due to excessive looseness between the steering wheel's gear teeth and the rack, or severe looseness in the main ball joint, which should be checked one by one. The four-wheel alignment function is based on the vehicle's four-wheel parameters, adjusted to ensure good driving performance and a certain level of reliability. The benefits of four-wheel alignment include: 1. Enhancing driving comfort; 2. Increasing tire lifespan; 3. Ensuring straight-line stability of the vehicle; 4. Reducing wear on chassis suspension components; 5. Improving driving safety.

19

2

Share

How to open the engine hood of Haval M6?

Haval M6 engine hood opening method: There is a handle at the lower left of the main driver's compartment. Pull the handle to release the engine hood latch, then go to the front of the car to open the hood. The Haval M6 is a compact SUV under the Haval brand, with dimensions of 4664mm in length, 1830mm in width, and 1729mm in height, and a wheelbase of 2680mm. The front suspension of the Haval M6 is a MacPherson independent suspension, and the rear suspension is a double-wishbone independent suspension. It is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 150PS, a maximum torque of 110Nm, and a maximum power of 210kW, paired with a 6-speed manual transmission.

6

2

Share

Where is the fuse of Baojun 360 located?

Should You Release the Accelerator When Shifting from D to L Gear?

What does the 205/55r16 tire mean?

Where to Obtain the Annual Inspection Decal for a New Car?

Why Does Car Glass Frost Over?

What to Do When a Car's Wheels Run Out of Alignment?

How to open the engine hood of Haval M6?

Can a Manual Transmission License Drive an Automatic Transmission Car?

What Causes the Engine Start-Stop Light to Illuminate?

How much fuel is consumed when idling with the air conditioning on for one hour?

Where is the water pump located on the Ford Mondeo?