Where is the fuse located in the Honda City?

1 Answers
DelEsther
07/29/25 6:09pm
The fuse in the Honda City is located in the engine compartment, at the rear of the left front headlight, next to the car battery. It is a black square box containing the car's fuses and relays. The City is a compact car with body dimensions of 4450mm in length, 1695mm in width, and 1477mm in height, with a wheelbase of 2600mm. In terms of power, the City is equipped with a 1.5-liter naturally aspirated engine that produces a maximum power of 88kW at 6600rpm and a maximum torque of 145Nm at 4800rpm. This engine is paired with either a 5-speed manual transmission or a CVT transmission. For the suspension, the front uses a MacPherson strut independent suspension, while the rear uses a torsion beam non-independent suspension.
Was this review help?
3
4
Share
More Forum Discussions

Can a C1 license be directly upgraded to an A2 license?

A C1 license cannot be directly upgraded to an A2 license. If you already have a C1 driver's license, the fastest way to obtain an A2 license is to upgrade to a B1 or B2 license after holding the C1 license for one year. After obtaining the B1 or B2 license, you must have three years of driving experience before you can apply for the A2 license. Therefore, upgrading from a C1 to an A2 license takes at least four years. Alternatively, you can take a second approach by directly obtaining a B2 license. After holding the B2 license for three years with driving experience, you can then upgrade to the A2 license. This method is faster, but it does not involve upgrading directly from a C1 license. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123) of the People's Republic of China, the following conditions must be met for upgrading a license: Article 14: If you already hold a motor vehicle driving license and wish to apply for an additional permitted vehicle type, you must not have accumulated 12 penalty points in the current scoring cycle or the most recent scoring cycle before applying. For applying to add medium-sized buses, tractor-trailers, or large buses to the permitted vehicle types, the following regulations apply: To apply for adding medium-sized buses to the permitted vehicle types, you must have held a license for urban buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled cars for at least three years and must not have accumulated 12 penalty points in the most recent three consecutive scoring cycles before applying. To apply for adding tractor-trailers to the permitted vehicle types, you must have held a license for medium-sized buses or large trucks for at least three years, or have held a license for large buses for at least one year, and must not have accumulated 12 penalty points in the most recent three consecutive scoring cycles before applying. To apply for adding large buses to the permitted vehicle types, you must have held a license for medium-sized buses, urban buses, or large trucks for at least five years, or have held a license for tractor-trailers for at least two years, and must not have accumulated 12 penalty points in the most recent five consecutive scoring cycles before applying. In temporary residence areas, the permitted vehicle types that can be applied for include small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles. Article 15: Under any of the following circumstances, you are not allowed to apply for large buses, tractor-trailers, medium-sized buses, or large trucks as permitted vehicle types: Being responsible for a traffic accident resulting in death with equal or greater liability. Driving under the influence of alcohol. Having your motor vehicle driving license revoked or rescinded within the past ten years. According to the "Permitted Vehicle Types and Codes" (Ministry of Public Security Order No. 139) of the People's Republic of China: The A1 permitted vehicle type is large buses, covering large passenger vehicles, and allows driving A3, B1, B2, C1, C2, C3, C4, and M vehicle types. According to the "Permitted Vehicle Types and Codes" (Ministry of Public Security Order No. 139) of the People's Republic of China: The A2 permitted vehicle type is tractor-trailers, covering heavy and medium-sized full trailers and semi-trailers, and allows driving B1, B2, C1, C2, C3, C4, and M vehicle types.
16
2
Share

What are the procedures required for motorcycle title transfer?

Motorcycle title transfer requires the following procedures: 1. Bring both the buyer's and seller's driving license, registration certificate, and ID card to the local used car trading market to pay the used car transaction tax; 2. Take all the documents to the traffic management office where the motorcycle is registered to complete the motor vehicle transfer; 3. Then go to the local office to complete the motorcycle registration procedures. A motorcycle is a two- or three-wheeled vehicle driven by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, fast, and widely used for patrol, passenger and cargo transportation, as well as a sports equipment. Broadly speaking, motorcycles are divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.
15
3
Share

Is a car tire pressure of 2.0 bar normal?

A car tire pressure of 2.0 bar is not normal. According to the provisions and requirements of the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5 bar. 2.0 bar is below the minimum value of the standard tire pressure, so it is not normal. Hazards of low tire pressure: The friction coefficient with the road surface increases, leading to higher fuel consumption; Causes the steering wheel to become heavy and prone to deviation, among other factors that are detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the function of the cord and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; The friction between the tire and the ground increases exponentially, causing the tire temperature to rise sharply, the tire to soften, and its strength to drop drastically. High-speed driving may lead to a tire blowout; Increases tire body deformation, making the tire side prone to cracking, while generating flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, cord breakage, and also increasing the tire's contact area with the ground, accelerating shoulder wear.
13
2
Share

Where is the Mazda6 engine serial number located?

Mazda6 engine serial number is located on the side of the engine block. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, enterprise or industry practices, and engine attributes to a batch of identical products. It represents information such as the manufacturer, specifications, performance, characteristics, technology, purpose, and production batch of the engine. Taking the 2015 Mazda6 Automatic Classic as an example: The manufacturer of this car is FAW Mazda, classified as a mid-size car with gasoline as the energy type. The car's dimensions are 4670mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2675mm. It features a naturally aspirated intake form and a unibody structure.
3
0
Share

What Causes Car Headlights to Stop Working?

The reasons for car headlights not working include: burnt-out bulbs, overheated wires, damaged relays or combination switches, open/short circuits in wiring, blown fuses, and poor electrical connections. The first step should be checking whether the fuse is intact, as sudden headlight failure is most commonly caused by a blown bulb fuse. If the bulb lights up briefly when turned on but then goes out, this may indicate poor wiring connections or open/short circuits - short circuits can easily burn out bulbs. If bulbs frequently burn out, check whether the generator voltage regulator is set too high. Sudden headlight failure requires prompt attention, and it is recommended to visit a certified professional repair shop or 4S dealership for inspection.
17
3
Share

What is the difference between high and low power versions of Volkswagen's 2.0T engine?

The differences between the high and low power versions of Volkswagen's 2.0T engine are: 1. Different boost pressure settings in the engine ECU; 2. The compression ratio of the high-power version is lower than that of the low-power version; 3. Different arrangement positions of the variable valve lift system. The automobile engine is the machine that provides power for the car, affecting its power performance, fuel economy, and environmental friendliness. Volkswagen AG is an automobile manufacturing company headquartered in Wolfsburg, Germany, founded by Ferdinand Porsche on March 28, 1937. The company owns brands such as Audi and Volkswagen. The VW in the Volkswagen logo stands for the first letters of its full name, appearing as three 'V's formed by middle and index fingers, symbolizing the company's and its products' victory.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.