···
Log in / Register

Where is the fuse located in the Great Wall Haval H6?

4 Answers
CamillaDella
07/29/25 8:49pm

The fuse of the Great Wall Haval H6 is located on the right side of the engine compartment. Fuses are one of the important components in automotive circuits, primarily used to protect the circuit and electrical equipment. Once the voltage exceeds the rated value, it will automatically blow to prevent accidents. They are commonly used for overcurrent protection in automotive circuits and also for overcurrent protection in industrial equipment. The Great Wall Haval H6 is a compact SUV launched by Great Wall Motors, with dimensions of 4645mm in length, 1860mm in width, and 1720mm in height, and a wheelbase of 2680mm. It is equipped with a 1.5T turbocharged engine with a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.

Was this review help?
14
0
Share
DiColeman
08/14/25 6:22pm

I'm very familiar with the fuse locations of the Great Wall Haval H6, as I've been driving this model for several years. There are two main locations: one is in the engine compartment, near the battery or firewall – you can see a small black box when you open the hood, with icons on the cover indicating the fuses; the other is inside the cabin, usually on the left side of the dashboard below the steering wheel, where a small panel can be opened. Remember to check the user manual for the location diagram. If you can't find it, check the engine compartment or the left leg area, but don't force anything to avoid damage. Fuses protect electrical circuits – for example, if your car lights or AC stop working, it might be a blown fuse. Replacing it is simple: first turn off the engine and remove the key, use a tool to pull out the old fuse and check its number, then buy the same model to replace it. Safety first – if you're unsure about the location, visit a 4S shop or professional garage to avoid unnecessary trouble.

Was this review help?
13
1
Share
Expand All
AmeliaFitz
10/16/25 6:48am

After driving my Haval H6 for a while, I found the fuse locations quite easy to locate. There are two spots: one is at the front of the engine compartment—just open the hood and check near the front of the car; the other is inside the cabin, under the driver's left leg where you can pry open a small cover. New drivers shouldn't stress—just refer to the manual diagrams or take photos with your phone for backup. Fuses can blow easily; for example, if the radio stops working, it might just be a blown fuse. Replacing it yourself takes less than a minute: turn off the car, pull out the old one, match the number to buy a new one, and plug it in. Remember to keep the wiring dry and free of dust to minimize repair needs—it's quite practical.

Was this review help?
1
5
Share
Expand All
SanTeagan
11/29/25 7:34am

Having driven the Haval H6 for over a decade, the fuses are usually located in the panel under the driver's seat. Simply lift the cover to access the fuse box. The position is fixed, and the manual includes diagrams for easy reference. In case of issues like the horn not working, checking here first is recommended.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

How to Use a Motorcycle License After Merging with a Car License?

After merging a motorcycle license with a car license, the usage rules are as follows: an individual can only ever possess one driver's license, with a total score of 12 points. Whether violating traffic laws while riding a motorcycle or driving a car, the demerit points will be recorded under the same license, affecting each other. Below is relevant information about the driver's license: 1. Introduction: The full name of the driver's license is the motor vehicle driver's license, also known as a 'driver's license.' It is a certificate required by law for individuals who operate motor vehicles. 2. Definition: A motor vehicle driver's license is a legal document issued by the administrative authorities to individuals who have learned to drive a motor vehicle, mastered traffic regulations and driving skills, and passed the required examinations, permitting them to operate a certain type of motor vehicle.
9
5
Share

How Much Horsepower Does the Isuzu 2.8T Diesel Engine Have?

Isuzu 2.8T diesel engine has a power output of 177 horsepower. Additional information is as follows: 1. Isuzu: Isuzu is a Japanese automobile manufacturing company headquartered in Tokyo, Japan, with integrated manufacturing and assembly. Its factories are located in Fujisawa City, Tochigi Prefecture, and Hokkaido, Japan, and it is renowned for producing commercial vehicles and diesel engines. 2. Engine: An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. The term engine can refer to both the power generation device and the entire machine including the power unit.
9
1
Share

What are the differences between China 6 and China 5 vehicle emission standards?

Here are the specific differences between China 6 and China 5 vehicle emission standards: 1. Different control levels: The China 5 standard's emission control level is equivalent to Europe's currently implemented Stage 5 emission standard. The China 6 standard for motor vehicle pollutant emissions was established to prevent environmental pollution from exhaust emissions of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. 2. Different release dates: The China 5 standard was released on September 17, 2013. The China 6 standard was released on June 22, 2018. 3. Different issuing authorities: The China 5 standard was issued by the Ministry of Environmental Protection. The China 6 standard was jointly issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine.
4
3
Share

Who is at fault when encountering a car that cuts in line and collides?

In general, the responsibility lies with the driver who collides with the car that cuts in line. Here are some driving precautions: 1. Pay attention to speed: Unless on a highway, it's generally advisable to maintain a stable speed around 60 km/h, which is more conducive to vehicle control. 2. Frequently check the rearview mirrors: Rearview mirrors allow you to observe the road conditions on both sides and behind the vehicle, especially when changing lanes, reversing, or overtaking, where they play a crucial role. 3. Maintain a safe distance: If the car in front brakes or cuts in, most drivers' immediate reaction is to hit the brakes. Sometimes, excessive tension can lead to oversteering, causing traffic accidents. Therefore, keeping a safe distance from the car ahead is crucial. When a car cuts in, it's important to slow down appropriately and yield.
19
0
Share

How many points are deducted and how much is the fine for driving in a bus lane?

Driving in a bus lane will result in a deduction of 2 points. Illegally occupying a bus lane violates the provisions of the Road Traffic Safety Law: motor vehicles driving not in accordance with the prescribed lane will be penalized with 2 points deducted from the driver's license and a fine of 200 yuan, which must be paid within 15 days. Precautions: 1. Be aware of the permitted access time: Understand the permitted access time for bus lanes. Many bus lanes are dedicated to buses during peak hours, while other vehicles can enter during non-peak hours. Be clear about the time slots dedicated to buses to avoid entering. 2. Familiarize yourself with the road: Familiarize yourself with the road in advance. If you are not familiar with the local roads, carefully identify road signs or follow taxis, which generally do not make mistakes. 3. Avoid being forced to yield the lane: Inexperienced drivers may be forced into the bus lane by other vehicles, so novice drivers should pay attention. When being forced, you can slow down and yield, but never give up the lane.
16
4
Share

What Documents Are Needed to Drive for Didi and Where to Apply?

You need to apply for the 'Online Car-hailing Transport Permit' at the local taxi administration department where the service is provided, either by the vehicle owner or the ride-hailing platform company. Below are the requirements for driving for Didi: 1. Vehicle requirements: Must have a local license plate, registered as 'reserved passenger transport for hire.' Passenger vehicles with 7 seats or fewer, and the vehicle must not have been in use for more than 4 years. Must be equipped with a satellite positioning device with driving record functionality and an emergency alarm device. The vehicle's technical performance must meet environmental and operational safety standards. 2. Requirements to become a ride-hailing driver: Must have local household registration or have held a local residence permit for more than 1 year, and must not have reached the statutory retirement age. Must hold a motor vehicle driver's license for the corresponding vehicle type and have at least 3 years of driving experience. No record of traffic crime, dangerous driving crime, drug use, drunk driving, and no record of accumulating 12 penalty points in the last 3 consecutive scoring cycles. No record of violent crimes.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.