···
Log in / Register

Where is the fuse located in the BMW X3?

5 Answers
LeFelicity
07/29/25 2:46am

BMW X3 fuse is located in the fuse box inside the glove compartment on the passenger side. Here is more information about the BMW X3: 1. Model: The BMW X3 is an SUV model with a length, width, and height of 4454mm, 1798mm, and 1545mm respectively, and a wheelbase of 2760mm, giving it a unique personality. It introduces the new SUV Sports Activity Vehicle concept and is equipped with BMW's patented xDrive intelligent all-wheel drive system. 2. Powertrain: The BMW X3 uses a very classic 2.0T turbocharged engine, paired with an 8-speed automatic transmission. This powertrain system has been widely used across BMW models, demonstrating strong stability and durability, with very powerful performance. The 0-100 km/h acceleration time can be controlled within 6.8 seconds.

Was this review help?
12
2
Share
SanOlive
08/12/25 12:58pm

Hey, I drive a BMW X3 quite often, and the fuse box is usually hidden under the hood or in front of the passenger seat. After opening the engine hood, check the left or right side—you'll spot a black plastic box, which marks the fuse box location. If you can't find it in the engine compartment, try the passenger side. Remove or slightly pull open the glove compartment beneath the dashboard to reveal the fuse set. The position might vary slightly depending on the car's model year—for example, post-2018 models tend to have it closer to the inner corner. Always turn off the engine and remove the key before searching—safety first, as touching live wires can be dangerous. The user manual includes a detailed diagram, so checking it can save time. If your headlights or audio system act up, a blown fuse is a likely culprit. Instead of randomly searching, it's often easier to just take it to a repair shop.

Was this review help?
8
2
Share
Expand All
Kim
10/02/25 4:45am

Over the years, I've frequently worked on BMW repairs. The fuse box locations in a BMW X3 are divided into two parts: The engine compartment fuse box is typically located on the right or left side under the hood, near the battery; while the interior one is found inside the passenger-side dashboard, accessible after opening the glove compartment where you'll see a small box. Note that designs vary between model years like the 2015 and 2020 versions, with the engine compartment type being more common and easier to locate. Always remember to never work on fuses while they're live – first use a test light to check fuse status. During routine maintenance, take a moment to inspect fuse connections to prevent loose contacts that could cause electrical issues. Address any problems promptly to ensure driving safety, as cars, like people, require careful attention.

Was this review help?
9
2
Share
Expand All
LeMorgan
11/15/25 6:29am

As a car enthusiast, I know the BMW X3's fuse box is mainly located under the hood or in interior corners. In the engine compartment, after lifting the hood, it's often found on the left side or near the battery. There's also a location behind the glovebox under the dashboard on the passenger side, easily accessible by removing the trim panel. Beyond just locations, what do fuses do? They're little protectors of electrical circuits - if current gets too high, they melt to prevent damage to components like headlights or AC. When checking, always turn off the engine first, then simply use a multimeter to test their condition. New owners should get familiar with their vehicle; occasionally inspecting during maintenance can extend the car's lifespan without unnecessary expenses.

Was this review help?
11
2
Share
Expand All
GavinMarie
01/05/26 8:06am

I find the BMW X3 quite user-friendly, and the fuse box locations are pretty easy to locate: under the hood, it's usually in the left corner of the engine bay; the more commonly used one is inside the dashboard in front of the passenger seat—just open the door, crouch down, and look behind the glove compartment, where you'll find a small box. The design considers ease of access, avoiding the need for female drivers to bend over uncomfortably. Before searching, make sure the car is turned off, the seatbelt is fastened, and be careful not to cut your hands. If you encounter issues like lights or the horn not working, it's likely a fuse problem—don't panic, just check these spots first. The manual has diagrams to guide you. Addressing small car issues early saves big troubles later, keeping your vehicle in perfect condition for a smooth and enjoyable drive.

Was this review help?
8
1
Share
Expand All
More Forum Discussions

What Mercedes-Benz car has a 4.0-liter engine?

Mercedes-Benz GL SUV-class vehicles are equipped with 4.0-liter engines. Engine displacement and automobiles: The space volume that the piston moves from top dead center to bottom dead center is called cylinder displacement; if the engine has multiple cylinders, the sum of all cylinders' working volumes is called engine displacement. It is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, which represents the size of the engine more accurately than bore diameter and cylinder count. Many engine specifications are closely related to displacement. Displacement classification: In China, passenger vehicle classification is determined by engine displacement. Mini cars have displacements ≤1.0L; compact cars range from 1.0-1.6L; midsize cars range from 1.6-2.5L; executive cars range from 2.5-4.0L; and luxury cars have displacements >4.0L.
5
4
Share

Does the 10th-generation Accord have a chassis lifting function?

10th-generation Accord does not have a chassis lifting function. Introduction to the chassis: The chassis refers to the combination of the transmission system, running system, steering system, and braking system on a car. Functions of the chassis: To support and install the car engine and its various components and assemblies, forming the overall shape of the car, bearing the engine power, and ensuring normal driving. Related functions of the chassis: The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, and receiving the power of the engine to make the car move and ensure normal driving.
18
5
Share

Where is the three-way catalytic converter located in the 10th generation Civic?

Installed in the vehicle's exhaust system, it is the most important external purification device. Working principle: When high-temperature exhaust gases pass through the purification device, the purifying agents in the three-way catalytic converter enhance the activity of CO, HC, and NOx gases, promoting specific oxidation-reduction chemical reactions. CO oxidizes at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds oxidize into water (H2O) and carbon dioxide; NOx reduces into nitrogen and oxygen. These three harmful gases are transformed into harmless gases, thereby purifying the vehicle's exhaust. Electronic fuel injection system: The electronic fuel injection system in a car engine generally consists of three major components: the fuel injection circuit, sensor group, and electronic control unit. If the injector is installed in the original carburetor position, meaning there is only one gasoline injection point for the entire engine, this is called single-point fuel injection. If injectors are installed on the intake pipe of each cylinder, meaning gasoline is injected into the cylinders from multiple locations (at least one injection point per cylinder), this is called multi-point fuel injection.
13
3
Share

How long does it take to fully charge the BAIC EU5 with fast charging?

The battery capacity of the BAIC EU5 is 54 kWh, and it takes approximately 7.7 hours to fully charge. BAIC New Energy EU5 interior: The interior design of the EU5 is relatively simple and elegant, without many complicated buttons, but it doesn't replace everything with a large screen like many new energy models. The floating center console design gives a relatively fashionable feel, and the interior quality has also been greatly improved. It emphasizes the concept of intelligent connectivity, and its performance in terms of configuration is also quite good. BAIC New Energy EU5 powertrain: The R500 version has a pure electric comprehensive range of 416 km, while the R550 version has a pure electric comprehensive range of 450 km, which is basically the top level among domestic electric models. The new car is equipped with a motor with a maximum power of 160 kW. The BAIC New Energy EU5 has strong product competitiveness, but there are also several issues that need optimization. Although the entry price of the R500 model is 129,900 yuan, which is in line with the industry average, it does not have any cost-performance advantage. Moreover, BAIC's brand premium in China cannot keep up with automakers like Geely, BYD, and Great Wall.
1
4
Share

Where is the key sensing area for the 10th generation Accord?

Under normal circumstances, the remote key for the 10th generation Accord can function properly at a distance of over 10 meters. Introduction to remote keys: A remote key utilizes the wireless remote function of the central locking system, allowing doors to be opened or locked from a distance without inserting the key into the keyhole. Working principle of remote keys: Simply put, the working principle involves the key emitting a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU, Electronic-Control Unit) then identifies the signal code, and the system's actuator (motor or electromagnetic coil) executes the locking/unlocking action.
14
2
Share

What is the fuel tank capacity of the BAIC Huansu S6?

The fuel tank capacity of the BAIC Huansu S6 is 60 liters, as officially announced. The BAIC Huansu S6 uses 92-octane gasoline, with a fuel consumption of 7.7-7.8L per 100 kilometers. A full tank can cover a distance of 769-779 kilometers. During daily driving, it is important to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the specified tank capacity.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.