Where is the fuse for the windshield wiper of Lavida Plus?

Is it necessary to pause when shifting gears?

There is no need to pause in neutral when shifting gears. Precautions for shifting gears: When shifting gears, keep the steering wheel steady. During gear shifting, one hand controls the steering wheel while the other operates the gear lever. Since only one hand is used, it's less stable than using both hands, so it's important to maintain steady control. Avoid violently shaking the gear lever back and forth. Simply depress the clutch and move the gear lever to the appropriate position—there's no need to shake it unnecessarily. Coordinate the clutch properly when shifting gears: Whether using the double-clutch shifting method or the single-clutch shifting method, it's essential to fully depress the clutch pedal when engaging it. After completing the gear shift, before fully releasing the clutch, gently press the accelerator, then slowly release the clutch, maintaining a semi-engaged state until the vehicle speed stabilizes before completely releasing the clutch.

4

5

Share

Should the Exhaust Valve Be Closed When Driving on the Highway?

It is best not to close it. The function of the exhaust valve is to control the exhaust sound and the size of the exhaust back pressure. More relevant information is as follows: 1. Introduction: The exhaust valve is an essential auxiliary component in pipeline systems, widely used at the highest points, elbows, or areas where air may be trapped in pipelines. It helps to remove gas from the pipeline to ensure smooth operation. Without this valve, the pipeline may experience air resistance at any time, preventing it from achieving the designed water capacity. Additionally, power outages during pipeline operation can cause vibrations or even ruptures. 2. Working Principle: During the exhaust state, the float, due to gravity, pulls one end of the lever downward, causing the lever to tilt. This creates a gap between the lever and the exhaust hole, allowing air to escape through this gap. As the air is expelled, the water level rises, and the buoyancy of the water causes the float to rise. The sealing end of the lever gradually presses against the exhaust hole until it is completely blocked.

1

Share

Is it free to repair a new car less than one year old at a 4S store?

As long as it is within the warranty period. However, the relevant damaged parts must be ensured not to have undergone any repair treatment, otherwise the 4S store will not recognize it. Also, it depends on what parts are under warranty. Rubber parts are generally covered for three to six months, major assemblies are covered for two years or within a limited mileage, and paint is usually covered for three years. The specific details should be checked in the vehicle manual. The functions of maintenance include: Ensuring the vehicle is in excellent performance condition; improving the vehicle's efficiency and reducing the wear of its parts and tires; enhancing driving safety; avoiding potential hazards caused by vehicle issues; reducing noise and environmental pollution; maintaining the vehicle's appearance and preventing damage. The methods to check the warranty period are: Check the invoice date of the car, and calculate from that date; check the warranty certificate. The new car warranty period refers to the time frame during which the car manufacturer provides free repairs and maintenance for faults caused by quality issues when selling the product to consumers.

6

3

Share

Are headlights and clearance lights the same?

Clearance lights and headlights are controlled by the same button - pressing it once turns on the clearance lights, while pressing it twice activates the headlights. When headlights are turned on, clearance lights will automatically activate by default. Headlights are the illumination lights at the front of the vehicle, which can switch between low beam and high beam by pushing the turn signal lever forward or backward. Clearance lights are the outermost lights at the front and rear of the vehicle. More relevant information is as follows: 1. Clearance lights: Literally, "clearance" means warning and "light" refers to outline, so clearance lights are warning lights that alert other vehicles. They are installed along the top edges of the vehicle to indicate both height and width. According to safety standards, vehicles taller than three meters must be equipped with clearance lights. The color of clearance lights is white at the front and red at the rear. 2. Headlights: These are the main lights. The headlight assembly is one of the crucial components ensuring safe vehicle operation. The longer the illumination distance and better the light distribution characteristics of headlights, the higher the safety performance of the vehicle.

10

5

Share

Should the left turn signal be up or down?

When making a left turn, the turn signal should be pushed downward. Function of turn signals: As signal lights, turn signals primarily serve to alert surrounding vehicles during daily driving, indicating an upcoming turn and prompting other vehicles to yield to avoid collisions. Whenever a vehicle needs to steer away from its current lane, the turn signal should be activated in advance - this is a fundamental principle of safe driving. Working principle of turn signals: Turn signal lamps use xenon tubes with microcontroller-controlled circuits that alternately flash left and right continuously. When voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core, yoke, armature, and working air gap. Under the magnetic field's influence, the armature is attracted to the iron core's pole face, causing normally closed contacts to open and normally open contacts to close. When the voltage or current at both ends of the coil drops below a certain threshold and the mechanical reaction force exceeds the electromagnetic attraction, the armature returns to its initial state, with normally open contacts opening and normally closed contacts closing.

14

2

Share

Should Dunlop tires be replaced after 6 years?

Dunlop tires should be replaced after 6 years. Generally, passenger car tires need replacement within 3-5 years. Even if the tire wear appears good, rubber products will show significant aging signs after 4-5 years. Even if the car tires use special rubber with stronger durability, the safe service life is around 5 years. In other words, tires should be replaced after 6 years of use. Below are the functions of car tires: 1. Supporting the entire weight of the vehicle: Car tires support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Improving vehicle performance: Car tires transmit traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby improving the vehicle's power performance, braking performance, and passability. They work together with the car suspension to cushion impacts during driving and dampen resulting vibrations. 3. Preventing early damage to vehicle components: Car tires prevent vehicle components from suffering severe vibrations and early damage. They adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.

5

4

Share

Where is the fuse for the windshield wiper of Lavida Plus?

Is it necessary to pause when shifting gears?

Should the Exhaust Valve Be Closed When Driving on the Highway?

Is it free to repair a new car less than one year old at a 4S store?

Are headlights and clearance lights the same?

Should the left turn signal be up or down?

Should Dunlop tires be replaced after 6 years?

What is the purpose of paddle shifters?

What are the rear combination lights respectively?

How to Remove the Golf Dashboard Panel?

What does Beijing Hyundai TGDI mean?