Where is the fuse for the windshield washer motor in the Mercedes-Benz E300L?

What are the reasons for the poor cooling effect of the Magotan's air conditioning?

The poor cooling effect of the Magotan's air conditioning may be due to the following reasons: 1. Insufficient cooling capacity: First, determine if the air filter is clogged, leading to reduced airflow. This is a common issue. If the air is cool enough but the airflow is insufficient, it may feel like the cooling is inadequate. Replacing the air filter can resolve this. 2. If the air filter is not clogged but the airflow is still low: After checking the air conditioning system and finding no faults, this may be caused by excessive dust in the evaporator. Cleaning the air conditioning system is necessary. Generally, it is recommended to replace the air filter twice a year—once in winter and once in summer. Cleaning the air conditioning system should be done once every one or two years, depending on usage frequency, and should be performed in summer, as winter does not require cleaning for heating. 3. Dirty condenser: This is another reason for poor air conditioning cooling. The condenser is located in front of the radiator and is used to dissipate heat from the refrigerant. It can often become clogged with debris such as lint, leading to poor heat dissipation and reduced cooling performance. Simply rinsing it with a water gun during car washing can easily solve this issue.

7

0

Share

What engine does the Senya R7 use?

Senya R7 offers only two powertrain options, equipped with a 1.6L and a 1.5T engine. The engine model is CA4GB16, developed based on the EA111. The maximum power outputs are 85kW (116PS) and 110kW (150PS) respectively, with peak torques of 155N·m and 220N·m. Below is a related introduction about the Senya R7: 1. In terms of appearance, the Senya R7 features a simple chrome trim decorating the front grille, while the trapezoidal front bumper is equipped with a lower guard plate and fog lights. Regarding body dimensions, the FAW Senya R7 measures 4305/1780/1655mm in length/width/height, with a wheelbase of 2600mm. The trunk capacity is 375L, which can be expanded to 1350L when the rear seats are folded down. 2. In terms of configuration, the upgraded FAW Senya R7 now includes GPS navigation + Bluetooth, leather multifunction steering wheel + cruise control, smartphone connectivity, rearview camera, and an 8-inch embedded touchscreen as standard across all models. High-end models additionally feature a sunroof, a secondary instrument panel, and an electronic parking brake.

13

4

Share

Reasons and Solutions for Dongfeng Citroen Failing to Start

Dongfeng Citroen failing to start can be attributed to a dead battery, obstructed fuel flow, or poor ignition system performance. Below are the relevant explanations: 1. Dead battery: It is necessary to take the vehicle to a service station for battery charging. Method: When the battery voltage is below the rated value and the vehicle cannot start or operate normally, immediately call the service station for assistance. 2. Obstructed fuel flow: Do not wait until the fuel is almost empty before refueling. Method: Place the car in a warm environment, and it will start after a while. Alternatively, thoroughly clean the fuel system to resolve the issue. 3. Poor ignition system performance: Remove the spark plug, clean the oil between the electrodes, and reinstall it to get the car running. Method: Inspect the ignition system and address issues causing low ignition energy, such as spark plug electrode gap, ignition coil energy, and high-voltage line condition.

6

0

Share

How to Deal with Grooves on the Surface of Brake Discs?

Here are the methods to deal with grooves on the surface of brake discs: 1. If the grooves are not deep. You can remove the brake pads and smooth them with coarse sandpaper, then reinstall the polished brake pads. During use, the grooves on the brake discs can be eliminated. 2. If the grooves on the brake discs are deep. You can remove the brake discs and take them to a lathe workshop to grind off the grooves, which is known as resurfacing the brake discs. After installation, they can continue to be used. 3. If the grooves reach the wear limit. The brake discs need to be replaced. The following are the reasons for grooves on brake discs: 1. The brake pads are too hard, or the brake pads are severely worn, exposing metal parts that directly rub against the brake discs, causing grooves. At this time, there should also be a screeching sound. 2. There are sand particles or metal debris between the brake pads and discs, causing grooves after friction. 3. Normal wear of the brake discs. The maximum wear limit for brake discs is 2 millimeters. After reaching the limit, it is necessary to replace the brake discs with new ones.

15

2

Share

What Causes the Noise Under the Steering Wheel When Driving on Rough Roads?

Here are the specific reasons for the noise under the steering wheel when driving on rough roads: 1. Check the car's shock absorbers. It is best to go to a 4S shop or repair shop and use a lift to raise the vehicle to inspect whether there are gaps in the shock absorbers or faults in the suspension. If the shock absorber is leaking oil, it may be due to a faulty oil seal gasket, and the shock absorber needs to be replaced. Generally, the service life of a shock absorber is 80,000-100,000 kilometers. When the car reaches 80,000 kilometers, the technician should be asked to check the condition of the shock absorbers during regular maintenance, and repair any faults promptly. 2. Excessive clearance in the steering tie rod ball joint may also cause noise when turning. In severe cases, it may lead to steering wheel shaking or uneven tire wear. The ball joint should be replaced at a 4S shop or repair shop as soon as possible. 3. Excessive clearance or looseness in the lower control arm. The lower control arm is an important component that maintains the elasticity of the car body and is part of the car's suspension. It connects the axle and the frame, helping to absorb the impact of rough roads on the car. Once the lower control arm fails, it should be replaced promptly at a 4S shop or repair shop.

13

0

Share

What to Do When the Anti-Theft System Locks and the Engine Won't Start?

Methods to unlock the anti-theft system when the engine won't start: 1. Turn on the vehicle's power three times in succession, then turn it off. 2. Disconnect the vehicle's battery for 15 seconds. 3. Wait until the engine warning light appears on the dashboard, do nothing, and wait for a while before attempting to start the engine. Here is some additional information about the anti-theft system: 1. The car's anti-theft system consists of an electronic controller, key control, and actuators, designed to prevent theft of car items. 2. While the car is in motion, it can prevent doors from opening unexpectedly. Most car models are equipped with central locking, which allows centralized control of the car's door locks and trunk lock, better achieving the purpose of car theft prevention. 3. With the continuous development of the automotive industry, the anti-theft system has been continuously upgraded. Currently, the car's anti-theft system can increase the difficulty of car theft, prolong the time required for theft, and achieve the purpose of car theft prevention.

1

3

Share

Where is the fuse for the windshield washer motor in the Mercedes-Benz E300L?

What are the reasons for the poor cooling effect of the Magotan's air conditioning?

What engine does the Senya R7 use?

Reasons and Solutions for Dongfeng Citroen Failing to Start

How to Deal with Grooves on the Surface of Brake Discs?

What Causes the Noise Under the Steering Wheel When Driving on Rough Roads?

What to Do When the Anti-Theft System Locks and the Engine Won't Start?

Where is the OBD port located on the BAIC Huansu S2?

Why Does Changing to Larger Wheels Actually Save Fuel?

Why Shouldn't Rear-Wheel Drive Cars Floor the Accelerator?

Does Tesla have mandatory scrapping?