Where is the fuse for the Teana V6 air conditioning compressor?

What to Do If Your Car Is Flooded on a Rainy Day?

If your vehicle is flooded on a rainy day, you should notify the insurance company as soon as possible. Below is a detailed introduction on how to handle a flooded car: 1. Contact the insurance company: Get in touch with the insurance company and have their staff come to the scene for inspection. Do not move the vehicle on your own. 2. Do not start the vehicle: While waiting for the insurance inspector, do not attempt to turn the ignition key, and strictly avoid trying to start the vehicle. If the water is not too deep, disconnect the negative terminal of the battery to prevent the electronic modules inside the car from being damaged by water. 3. Send to a repair station as soon as possible: If you do not have insurance, after discovering that your car is flooded, call a tow truck immediately to have the car towed to a repair station. Leaving the car submerged in water for too long can damage the electronic components, leading to significant safety hazards in future use.

10

2

Share

Where is the car radiator support located?

Car radiator support is essentially the radiator frame, which is located at the front of the vehicle. There are three types of radiator frame materials available on the market: plastic, iron, or alloy. Structurally, they can be categorized into one-piece and split types. The one-piece design is the most common form in the market, while the split type is generally divided into three sections connected by bolts or welding points. Below are methods to check if the radiator frame has been replaced: 1. Inspect the welding points: Look for signs of re-grinding on the frame's welding points. 2. Examine the frame for repair marks: Check for any traces of reshaping. 3. Observe the paintwork: Verify if the frame's paint matches that inside the engine compartment and look for signs of touch-ups or complete repainting. 4. Check the vehicle's side panels: Look for any collision repair marks. 5. Inspect the doors for defects: Ensure they fit tightly with the body, show no warping, and have uniform gaps. Any repairs or replacements will inevitably leave certain defects.

19

4

Share

Where is the Tire Pressure Monitoring System on the 2018 Malibu?

The Malibu is equipped with an internal tire pressure monitoring system where the sensors are installed on the wheel hubs. After installation, a vehicle dynamic balance must be performed, which requires the service of a tire shop or repair facility. Below is a detailed introduction to the Chevrolet Malibu: Exterior: The Malibu adopts GM's wraparound design, with headlights featuring an integrated high/low beam structure and xenon light sources. Powertrain: The 2.0L model uses an all-aluminum engine, while the 2.4L model is equipped with an SIDI direct injection engine, with plans to introduce a direct injection + turbocharged engine in the future. Both models come with a 6-speed automatic transmission. The Malibu will be powered by either a 2.0L or 2.4L SIDI direct-injection naturally aspirated engine, both of which are also found in the Buick Regal, with maximum power outputs of 147 horsepower and 186 horsepower, respectively.

3

2

Share

What details should you pay attention to when buying a new car?

When buying a new car, you need to pay attention to the following seven details: 1. Check the vehicle's appearance: First, inspect whether there are any obvious paint damages on the body. Be thorough in your examination. 2. Check each door: Open all four doors separately to check if the opening force is the same for the corresponding left and right doors. Then observe the doors for any sagging and ensure the door stoppers are functioning. 3. Inspect the chassis and battery: Look for any corrosion on the connectors and check if the battery indicator window is green. 4. Check the engine oil color: Start the engine and let it run for three minutes before turning it off. Pull out the dipstick and wipe it with a tissue—discard if the oil is black. 5. Inspect the cockpit: 6. Verify all expenses: When picking up the new car, make sure to clearly review all expenses, from the car itself to additional accessories and maintenance documents. Double-check everything. 7. Warranty and return policy: Confirm the warranty and return policies with the 4S dealership.

1

2

Share

Can ETC devices be installed by oneself?

ETC cannot be installed by oneself. The ETC device requires the input of vehicle information, model, etc., and must be installed and activated by staff before it can function properly. You can call the customer service hotline of the provincial ETC company for consultation. The following is extended information about ETC: 1. Definition: ETC is the abbreviation of Electronic-Toll-Collection, which is an electronic non-stop toll collection system. It refers to a system where vehicles, when passing through toll stations, use onboard equipment to achieve vehicle identification, information input (entry), and automatic deduction of corresponding funds from a pre-bound IC card or bank account (exit). It is an electronic toll collection system for roads, bridges, and tunnels that is being actively developed and promoted internationally. 2. Function: The electronic non-stop toll collection system (ETC) is the most advanced toll system in the world and one of the service functions of intelligent transportation systems. In parking management, to improve the efficiency of vehicle entry and exit, passing vehicles do not need to stop at the crossing, enabling automatic vehicle identification and automatic toll collection.

10

0

Share

What is the fuel tank capacity of the 2017 Kia K3 in liters?

The fuel tank capacity of the 2017 Kia K3 is 50 liters. The vehicle is equipped with a 1.6-liter naturally aspirated engine and features a front-engine, front-wheel-drive layout. Starting from the 2017 model year, the fuel tank capacity of the Kia K3 has been increased. The 2019, 2020, and 2021 models all have a 53-liter fuel tank. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel may exceed the marked capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E (Empty) and F (Full). When the needle is close to E, it indicates low fuel, while proximity to F indicates a sufficient fuel level.

17

5

Share

Where is the fuse for the Teana V6 air conditioning compressor?

What to Do If Your Car Is Flooded on a Rainy Day?

Where is the car radiator support located?

Where is the Tire Pressure Monitoring System on the 2018 Malibu?

What details should you pay attention to when buying a new car?

Can ETC devices be installed by oneself?

What is the fuel tank capacity of the 2017 Kia K3 in liters?

How many points are deducted for crossing the line during curve driving?

Does different tire tread patterns have any impact?

At what mileage does an engine typically require a major overhaul?

What car has a leopard as its logo?