···
Log in / Register

Where is the fuse for the Mazda 6 cigarette lighter located?

4 Answers
LaylaMarie
09/01/25 4:01am

The fuse for the Mazda 6 cigarette lighter is located in the fuse box near the driver's left foot, rated at 15A, and can be removed using a fuse puller. The cigarette lighter is a standard component in cars, designed to provide a flame source for smokers. It's important to note that some cigarette lighter sockets remain powered even after the car is turned off, so it's advisable to unplug the lighter when not in use. The Mazda 6 is equipped with two engine options: a 2.0-liter and a 2.3-liter inline four-cylinder engine. The 2.3-liter engine features Sequential Valve Timing (S-VT) and Variable Valve Timing (VVT) technologies, which enhance engine performance, delivering more torque and greater power.

Was this review help?
2
1
Share
VonAlexandra
09/13/25 6:49am

I often encounter this issue at the repair shop. The Mazda6 cigarette lighter fuse is usually located in the fuse box under the dashboard, specifically near the left knee position of the driver's seat. Lift the small cover, and you'll see fuses labeled with their functions—look for the 20-amp fuse marked CIG or LIGHTER. The most common cause of a blown fuse is overloading when plugging in a phone charger. For replacement, it's safer to turn off the engine and remove the key first. You can change it yourself using needle-nose pliers to pull out the old fuse and insert a new one of the same specification, then test it. Don't worry too much about the hassle, but be careful not to touch other components. Small electrical faults in the car, if left unattended, could lead to bigger component failures. I recommend keeping a few spare fuses on hand for emergencies to ensure smoother travels.

Was this review help?
13
1
Share
Expand All
MariaAnn
10/27/25 7:36am

As a car owner, I find it quite annoying when the cigarette lighter breaks. The fuse is usually located in the car's fuse box near your left foot. Just lift the cover and look for the CIG label, typically rated between 15 to 20 amps. It's not difficult to replace it yourself—first disconnect the power to prevent electric shock, then buy a new fuse and plug it in. It's a quick fix. Actually, when using the cigarette lighter for charging or lighting cigarettes, be careful not to overload or cause a short circuit. Regular maintenance like checking the fuse box and cleaning out dust can help prevent issues. A car is a daily tool, and keeping it running smoothly ensures peace of mind and saves money without needing to rely on others.

Was this review help?
9
0
Share
Expand All
Robyn
12/10/25 7:52am

Check the cigarette lighter fuse. Locate the 20A fuse labeled CIG in the instrument panel fuse box under the driver's seat. If it's blown, simply replace it, but remember to turn off the vehicle first for safety.

Was this review help?
12
2
Share
Expand All
More Forum Discussions

What are the consequences of not handling a red light violation?

If a red light violation is not handled, the motor vehicle will not pass the annual inspection. If the vehicle fails to obtain a compliance mark three times in a row, it will be forcibly scrapped. For vehicle owners who suspect they may have run a red light but are unsure, they can check using the following methods: 1. Log in to the local traffic police website, click on the violation information query, enter the license plate number and engine identification code (also known as the VIN), some websites may require the engine number, and then enter the website verification code. Click confirm, and all violation information will be displayed. 2. Bring your ID card, driver's license, and vehicle registration certificate to the local violation handling office for inquiry. At the office, submit the documents to the staff, who will then retrieve the violation information. 3. Call the information hotline for inquiry.
20
3
Share

Is It Normal for the Engine Warning Light to Come On in Winter?

It is normal for the engine warning light to come on in winter. Here is a detailed explanation: 1. This situation may occur because the temperature is relatively low in winter. At this time, the internal temperature of the engine is also low, so when the car starts, the engine needs to reach a certain temperature to complete basic monitoring. 2. This fault will be detected, and the engine warning light will come on. When the engine temperature reaches a certain level, the fault will disappear, and naturally, the warning light will turn off. 3. If the warning light comes on in winter, don’t panic. Wait for the engine temperature to rise and see if the warning light turns off. If it does after the temperature rises, there is no problem, and you can drive normally. 4. If the warning light remains on when starting, it is likely due to excessive carbon deposits in the cylinders. Since carbon absorbs oil, the temperature in the cylinders may not reach a stable level. In this case, you still need to wait for the engine temperature to rise to ensure the issue is resolved.
4
4
Share

How to Adjust the Driver's Seat Properly?

Methods for adjusting the driver's seat: 1. Seat height adjustment: (1) Car seat adjustments are divided into manual and electric adjustments. Depending on the vehicle configuration, some models may have different seat adjustment functions. (2) After entering the car, the first step is to adjust the seat height. For most sedans and SUVs, there should be a distance of 1-2 fists between the top of your head and the roof (this may vary slightly for different models). Ensure that the height of your eye level is slightly above the center of the vertical distance of the front windshield. 2. Seat forward and backward adjustment: When adjusting, always remember the principle: your feet should be able to fully depress the clutch and brake pedals; when holding the steering wheel, your arms should be slightly bent. 3. Backrest angle adjustment: The backrest angle should also be adjusted properly. It should not be too reclined or too upright, as this reduces the distance between your body and the steering wheel, which may increase the risk of injury from the airbag in an emergency.
8
0
Share

What are the reasons for severe engine vibration in the Lingdong?

The reasons for severe engine vibration in the Lingdong are: 1. Low engine temperature; 2. Severe engine carbon buildup; 3. Engine misfire; 4. Spark plug failure. Taking the 2020 Lingdong as an example, it is a compact car with body dimensions of: length 4610mm, width 1800mm, height 1450mm, wheelbase of 2700mm, minimum ground clearance of 152mm, and a body weight of 1319kg. The 2020 Lingdong is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 130PS, maximum torque of 211Nm, and maximum power of 95.6kW, paired with a 7-speed dual-clutch transmission.
19
0
Share

Can You Add Engine Oil Right After Turning Off the Car?

You can add engine oil right after turning off the car. The method for adding engine oil is as follows: 1. Pull out the oil dipstick, wipe it clean, and measure again to see how much oil is missing; 2. Open the oil cap to add oil, then close the cap and start the car for a few minutes. After the oil has circulated in the engine for a while, check the oil dipstick again. If the level has dropped, continue adding more. The main functions of engine oil are: 1. Lubrication; 2. Assisting in cooling; 3. Cleaning; 4. Sealing and preventing leaks; 5. Rust and corrosion prevention; 6. Shock absorption; 7. Anti-wear. The method for changing engine oil is: 1. Lift the car, remove the undercover, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the undercover and lower the car, then use a funnel to add oil through the filler port.
13
1
Share

What is the method to open the engine hood?

The method to open the engine hood is: 1. Locate the engine hood release lever under the left side of the driver's seat; 2. Pull the engine hood release lever upward; 3. Fully open the engine hood and support it with the prop rod. The function of the engine is: to convert the thermal energy of gasoline into mechanical energy by burning it in a sealed cylinder, expanding the gas, and pushing the piston to perform work. Engine maintenance methods include: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Periodically remove carbon deposits from the engine; 5. Replace the vehicle's air filter, oil filter, and fuel filter on time; 6. Check the condition of the spark plugs; 7. Maintain normal engine speed.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.