Where is the fuse for the Magotan's windshield wipers located?

1 Answers
McAlexis
07/29/25 11:33am
The fuse for the Magotan's windshield wipers is located in the following positions: 1. Inside the fuse box, which is situated on the left side of the engine compartment, next to the battery. 2. Open the cover, and you will see clear markings inside indicating the location of the fuses for various components, including the SB22 fuse, which is a 25A or 30A fuse. Below is some information about fuses: (1) Fuses are commonly referred to as such, but they are officially called circuit breakers in national standards. The function of a fuse is to protect the circuit (wiring) and electrical equipment. (2) Automotive fuses are a type of current fuse; when the circuit current exceeds twice the rated current of the fuse, it will melt within seconds, serving to protect the circuit. (3) They are commonly used for overcurrent protection in automotive circuits and also for overcurrent protection in industrial equipment.
Was this review help?
8
3
Share
More Forum Discussions

What does tank turn mean on a car?

The tank turn on a car means turning around in place like a tank. After activation, the vehicle will mimic the tank's turning behavior by reducing the turning radius. It controls the left or right rear wheel to minimize the turning radius, ensuring the vehicle can make a U-turn on very narrow roads. Here is more about the tank turn: 1. The principle of a tank turn is achieved by driving the tracks on both sides in opposite directions, allowing the tank to pivot around its center as the origin point, enabling an in-place turn. Alternatively, locking one track while driving the other normally will cause the tank to turn around the stationary track as the pivot point. 2. In actual vehicles performing a tank turn, the rear wheel on the turning side is electronically brake-locked and occasionally rotates, while the other three wheels turn normally, completing the turn during this process.
5
4
Share

What does 125cc mean for a motorcycle?

It refers to the engine displacement of the motorcycle being 125 milliliters. After gasoline combustion, the exhaust gases are measured in cubic centimeters (CC), where CC stands for milliliters. Here are detailed explanations about 125cc motorcycles: 1. Relationship between displacement and fuel consumption: The CC of motorcycles and cars refers to the engine displacement of the vehicle. Larger displacement means higher fuel consumption and greater horsepower, while smaller displacement results in lower fuel consumption and reduced horsepower. For example, common motorcycle displacements like 125cc and 150cc show that the latter has larger displacement, greater horsepower, and higher fuel consumption compared to the 125cc. 2. Motorcycles of the same model: In China, motorcycles with 125cc engines are produced by brands such as Suzuki Haojue, Prince motorcycles, Honda, BMW, Yamaha, etc., all of which have derivative models based on this displacement.
3
2
Share

How to Solve Overweight Issues in Light Truck Registration?

There are several main solutions to address overweight issues in light truck registration: 1. If the overweight is caused by self-installed facilities such as guardrails: Remove these self-installed facilities during inspection to enable normal registration. 2. If the newly purchased vehicle itself is overweight: It will fail the inspection and thus cannot be registered. For registration issues, consult the local vehicle management office. If registration is truly impossible, the only option is to return the vehicle. Here are some additional details: 1. Vehicle overweight affects braking distance: Changes in vehicle load directly impact the length of the braking distance. Experiments show that at a speed of 30 km/h, for a heavy-duty truck weighing more than 3 tons, each additional ton of weight extends the braking distance by 0.5-1.0 meters. 2. Overloaded vehicles have longer braking distances due to increased inertia: The extension of the non-safe zone often creates unexpected psychological pressure on drivers, leading to accidents.
2
2
Share

What is the name of the Volkswagen phldeon?

phldeon Volkswagen is the Volkswagen Phideon. Below is relevant information: Design Concept: The Volkswagen Phideon follows the design concept of the previous CCoupe concept car in its overall body design. It features the Volkswagen family-style front design, with the front grille integrated into the LED headlights and extending towards the sides of the body. The side waistline runs through the entire body and extends above the taillights. Additionally, the taillight design is particularly noteworthy, as the Phideon's taillights adopt a double-layer design, with the lower layer taillights tapering inward to create a staggered effect. Interior Design: The interior of the Volkswagen Phideon maintains the standard Volkswagen style, but it stands out in terms of configuration. The new car is equipped with a night vision system, a heads-up display, and other technological features. It also includes electrically adjustable rear seats with independent ventilation/heating functions.
14
4
Share

What is the common name for Volkswagen's MLB?

Volkswagen's MLB is derived from the German abbreviation 'Modularer Längsbaukasten,' which means Longitudinal Engine Standardization Platform. MLB, MQB, and MEB all belong to Volkswagen's modular systems. MLB helps achieve a balanced front-to-rear weight distribution in vehicles, enhancing driving stability and comfort. Below is additional information: Vehicle Module: The most significant feature of vehicle modules is their high compatibility. Whether it's independent suspension or beam axle, long or short wheelbase, A-segment or B-segment cars, they can all use the same module. The platform concept was first proposed and implemented by Volkswagen. Advantages: With modularization, Volkswagen's manufacturing costs are reduced. The commonality of parts across platforms also significantly lowers maintenance costs for car owners. Additionally, the price of commercial car insurance decreases accordingly. Therefore, modularization offers more benefits than drawbacks compared to traditional platform approaches.
7
1
Share

Is Cadillac domestically produced?

Yes, it is domestically produced. Cadillac's Chinese factory is located in Jinqiao Town, Pudong New District, Shanghai. The full name of the factory is SAIC General Motors Cadillac Jinqiao Plant. More information about the factory: 1. The factory has complete supporting facilities: The first phase of the SAIC General Motors Cadillac Plant has a total investment of 8 billion yuan, covering an area of 477,000 square meters, with a total planned production capacity of 160,000 units/year. It includes complete supporting facilities such as a body shop, paint shop, assembly shop, high-speed test track, and joint station house. 2. The factory adopts fully automated production methods: The SAIC General Motors Cadillac Plant has the first body shop in China with the capability to manufacture all-aluminum bodies. The shop has two fully automated production lines for steel and aluminum, achieving 100% automation in body connection technology.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.