Where is the fuse for the Magotan's windshield wipers?

1 Answers
SanPhoebe
07/24/25 7:37pm
The fuse for the Magotan's windshield wipers is located on the left side of the engine compartment. Open the hood, and you will find it in the box on the right-hand side. Windshield wipers are important accessories installed on the windshield, designed to clear rain, snow, and dust that obstruct the driver's view, thus playing a crucial role in driving safety. The Magotan is FAW-Volkswagen's first B-segment sedan, with dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, and a wheelbase of 2812mm. The car features a dual-zone independent automatic air conditioning system that can automatically adjust to the different temperature needs of the driver and passengers, providing a personalized and considerate experience for the owner.
Was this review help?
20
2
Share
More Forum Discussions

Is it necessary to install a grounding strip to remove static electricity from private cars?

It is necessary to install a grounding strip to remove static electricity from private cars. Static electricity buildup in winter can lead to hazards: Especially in winter or abnormally dry environments, static electricity cannot dissipate through the air. Installation ensures improved vehicle safety. For older vehicles with minor oil seepage, static electricity may generate sparks that pose certain life safety threats. While driving, unexpected static shocks may cause excessive fright, potentially leading to traffic accidents. Static electricity can harm human health: Accumulated static electricity in the human body can damage health, severely affecting metabolism, raising blood sugar levels, causing skin diseases, and leading to autonomic nervous system disorders, reduced immunity, and increased susceptibility to illnesses like colds. Particularly during refueling at gas stations, it may also trigger accidental incidents.
11
2
Share

Can I Switch from 95 Octane Gasoline to 92 Octane Gasoline for My Car?

Car 95 octane gasoline can be switched to 92 octane gasoline. Different compression ratios apply: Generally, cars with a compression ratio between 8.5 and 9.5 should use 92 octane gasoline; cars with a compression ratio greater than 9.5 should use 95 octane gasoline. The choice is relatively based on the fuel tank settings of the car itself. Different octane levels: The octane level of 92 octane gasoline is lower than that of 95 octane gasoline. That is, 92 octane gasoline contains 92% isooctane, while 95 octane gasoline has an octane level of 95%. Different fuel prices: The unit price of 92 octane gasoline is cheaper than that of 95 octane gasoline.
19
3
Share

How Many Lumens Does the SST40 LED Emit?

Around 2000. Below is an introduction to the lumens of LED car lights: 1. Halogen Low Beam: For LED car light bulbs using halogen low beam, around 1000 lumens is suitable, while for high beam, around 1200 lumens is appropriate. 2. Xenon Lights: If equipped with xenon lights, over 2000 lumens is suitable. Below are additional details on related topics: 1. Car Headlights: Also known as car front lights or LED daytime running lights, it is essential to use car headlights properly during daily driving to ensure road safety. Xenon headlights differ from traditional halogen lights as they are high-voltage discharge lamps. 2. Light Emission Principle: The light emission principle involves stimulating a chemical reaction between xenon gas and rare metals using positive and negative electricity. Therefore, the lamp contains a glass bulb filled with xenon gas and a small amount of rare metals.
11
5
Share

What Causes a BMW 5 Series to Shake and Stall After Ignition?

The reasons why a BMW 5 Series shakes and stalls after ignition: 1. Triggered car anti-theft system: If the car anti-theft system is triggered, the car engine can start but cannot operate normally, so the vehicle will stall after starting. This situation is prone to occur after replacing the car key, so it is necessary to recode the key after replacing it or installing a new battery. 2. Ignition switch failure: If the car ignition switch fails, the car will experience issues such as stalling after starting and the vehicle fault warning light turning on. This situation is relatively complex and requires inspection and repair by professionals at an auto repair shop or 4S store. 3. Severe engine carbon deposits: If the car engine has severe carbon deposits and the fuel cannot effectively burn in the cylinder, the vehicle will stall after starting. In this case, the engine carbon deposits need to be cleaned promptly. 4. Car fuel system pressure: If the car lacks fuel system pressure, the fuel will not burn effectively. This situation requires professionals to inspect the car fuel system.
4
1
Share

How to Step on the Gear Shift Pedal?

When the vehicle is driving at high speed, there is no need to worry about stalling. After shifting gears, let the left foot follow the clutch pedal to release it, and then immediately step on the accelerator with the right foot. When shifting into first or second gear, if the clutch is released too quickly and the accelerator is not engaged in time, the engine is very likely to stall. Release the clutch to the semi-engaged position and gently press the accelerator with the right foot. If you follow the driving school method of slowly releasing the clutch until it is fully disengaged before pressing the accelerator, there is no need to coordinate the clutch and accelerator in this situation. Although this method is safe in reality, it is prone to stalling when going uphill. Therefore, when releasing the clutch to the semi-engaged position, lightly press the accelerator with the right foot to ensure smooth gear shifting.
2
4
Share

What causes a wide right side during right reverse parking?

There are several reasons for a wide right side during right reverse parking: Steering wheel turned too late: A wide right side during right reverse parking is actually caused by turning the steering wheel too late during reversing. If the rear of the car is still far from the corner of the parking space (about 30 cm away) but the right front door handle has already reached the extension line of the right boundary of the parking space or even beyond it to the left, then the steering wheel has been turned too late, making it easy to hit the left corner or boundary of the parking space. The entire car body leaning left: If the car body is parallel to the parking space but the entire car body is leaning left, not adjusting it may cause the left front corner of the parking space to be hit when exiting to the left. Therefore, you can first turn the steering wheel to the right by 1/4 turn, observing that the front wheels do not easily cross the line. When the distance on the right side is about right, turn the steering wheel to the left by 1/4 turn. When the car body is parallel to the parking space again, straighten the steering wheel.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.