Where is the fuse for the low beam headlight of Changan CS35 located?
3 Answers
The fuse for the low beam headlight of Changan CS35 is located in the engine compartment. The fuse box housing the low beam headlight fuse is responsible for the safety of the vehicle's external electrical components, such as the ECU, windshield washer fluid, lights, horn, ABS circuit protection, etc. The CS35 also has another fuse box that ensures the proper functioning of interior electrical components, such as the cigarette lighter, power windows, electric seats, and airbags, typically located on the left side of the steering wheel. The Changan CS35 is the first SUV independently developed by Changan Automobile, featuring a sporty, sleek, and stylish design with a technological touch. Its body dimensions are 4160mm in length, 1810mm in width, and 1670mm in height.
I remember that the fuse for the Chang'an CS35's low beam headlights is usually located under the dashboard inside the cabin, mostly above the passenger side footwell. You need to first get into the car, turn off the engine and all power sources, then lift the small panel on the passenger side or pry open the plastic cover to reveal the fuse box. Inside, there are various small fuses marked with icons—the one for the low beam is typically indicated by a symbol representing lights, such as a bulb or the words LOW BEAM. Once found, use a plastic clip to pull it out and inspect it. If there's a black burn mark indicating it's blown, replace it with a new fuse of the same specification. Fuses often blow due to a short circuit or overload, so it's advisable to also check the bulb's condition or for any aging wires. After repair, promptly test the headlights to avoid accidents when driving at night. Developing a habit of regular checks can save a lot of trouble.
I've encountered a similar issue before where the car headlights suddenly stopped working. After struggling for a while, I found out it was a blown fuse. The fuse box in the Changan CS35 is mainly located in the cabin, specifically in the small compartment in the footwell area on the passenger side. After sitting in the car and turning off the power, you can feel around or gently pry open the cover with a tool. Inside, there are rows of labels corresponding to different components, with the low beam usually marked with a number or a light icon. When replacing, use a dedicated fuse puller—never pull it out with your bare hands to avoid the risk of electric shock. There are various reasons for a blown fuse, such as voltage instability or loose connections. After fixing it, don’t forget to check the entire circuit to ensure safe and worry-free driving. During regular maintenance, take a quick look at the fuse condition to prevent these small issues from affecting your driving experience.
