Where is the fuse for the Lamando cigarette lighter located?

Where is the fuel tank cap switch on the Borgward BX5?

The fuel tank cap switch on the Borgward BX5 is located under the driver's seat. Pull it upwards to open the fuel tank cap. Taking the 2020 Borgward BX5 as an example, it is a compact SUV with body dimensions of 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm and a curb weight of 1525kg. The 2020 Borgward BX5 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW.

7

2

Share

What Causes the Squeaking Noise in the Magotan's Chassis?

The reasons for the squeaking noise in the Magotan's chassis are: 1. Exhaust or engine malfunction; 2. Aging of the shock absorber top buffer block and lower control arm rubber bushing; 3. Damage to the stabilizer bar link; 4. Loose chassis suspension system. The function of the car chassis is to support and install the car engine and its various components and assemblies, forming the body shape, receiving the engine's power to make the car move and maintain normal driving. The composition of the car chassis: It consists of the transmission system, steering system, running system, and braking system. Maintenance methods for the car chassis: 1. Regularly check the oil condition of important assemblies; 2. Pay attention to the wear of brake pads and clutch plates; 3. Perform four-wheel alignment periodically; 4. Monitor tire pressure and wear condition.

7

4

Share

Where is the fuel tank cap switch of Changan Automobile?

The fuel tank cap switch is located under the driver's seat in the main driving compartment. Since it is a mechanical lock, operating the fuel tank cap switch is not very convenient and requires manual operation. In fact, different car models have different designs, and there may be slight variations in the way the fuel tank cap is opened. In the trunk of the car, there is a backup fuel tank switch. By removing the plastic panel on the left side of the trunk, you can access the backup switch for the fuel tank cap. However, this operation should be performed by a professional mechanic at an auto repair shop. When opening the fuel tank cap, it is generally done by lifting it upwards. Therefore, it is important to apply the right amount of force to avoid damaging the operating lever. It is also advisable to prevent children from tampering with it, as a broken operating lever would make it impossible to open the fuel cap. The fuel tank cap refers to the container on the car used for storing gasoline. It is square-shaped, made of stainless steel, and has excellent sealing properties. It has only a small circular opening, about the size of a bottle cap, for easy storage. It is usually located at the rear of the car. In modern cars, the trunk and fuel tank cap can generally be controlled remotely from the driver's compartment.

8

3

Share

What does the car ECON switch mean?

The car ECON is short for the low-carbon and environmentally friendly driving mode. This button can turn the energy-saving mode on or off. Nowadays, cars generally have three driving modes to choose from: energy-saving mode, comfort mode, and sport mode. Below is information about these three modes: Energy-saving mode: When the car is in this mode, fuel consumption is relatively low. At this time, the sensitivity of the accelerator pedal will decrease, and the transmission will shift up more actively. Comfort mode: This mode can also be considered a normal operating mode for the car. In this mode, the accelerator pedal response will be more sensitive than in the energy-saving mode. Sport mode: The sport mode can be used during aggressive driving. After activating the sport mode, the accelerator pedal response will be very sensitive, and the transmission will delay the shift timing. The transmission will only shift up after the engine speed reaches the redline zone. After switching to sport mode, the engine speed will be maintained at around 3000 RPM, ensuring better power response during acceleration. When the car enters ECON mode, it can achieve reduced fuel consumption and energy savings, but the car's power will weaken. ECON can be understood as the abbreviation for 'economy.' In most cases, it is recommended to keep the ECON mode on. Only when high torque output is needed (such as when climbing a slope) or when the car's speed is very high should the ECON mode be turned off. After pressing the ECON button, the car enters the low-carbon and environmentally friendly driving mode. Next, the ECU, engine, and transmission intelligently execute the driver's intentions in the lowest fuel consumption mode, achieving optimal fuel economy through quick upshifts and smooth acceleration. When the driver presses the accelerator pedal deeply, the ECON system will effectively control the opening and closing of the intake valves to ensure smooth engine operation and energy savings. Although the ECON mode is simple and effective to operate, it cannot work under certain conditions: When the car speed exceeds 120 km/h, priority is given to speed, and the energy-saving mode will automatically deactivate. This means that if the speed exceeds the economical speed range (usually between 60-90 km/h), the ECON mode will not save fuel. The key to the ECON mode is the use of computer-independent operation while the car is moving to make it effective. Therefore, when idling or in N, P, or manual modes, ECON will not work.

20

0

Share

What are the physical requirements for obtaining a driver's license?

The physical requirements for obtaining a driver's license are as follows: Height: Applicants for large buses, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. Vision: For large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams, applicants must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the requirement is at least 4.9. Color vision: No red-green color blindness. Hearing: Applicants must be able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork. Those with hearing impairments who can meet this requirement with hearing aids may apply for a license for small cars or small automatic transmission vehicles. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement. Applicants with missing fingertip segments or a missing right thumb may apply for licenses for small cars, small automatic transmission vehicles, low-speed trucks, or three-wheeled vehicles. Lower limbs: Both lower limbs must be intact with normal movement, and the length difference should not exceed 5 cm. Applicants with a missing or non-functional left lower limb may apply for a small automatic transmission vehicle license. Those with missing or non-functional right or both lower limbs who can sit independently may apply for a license for specially modified small automatic transmission passenger vehicles for the disabled. Torso and neck: No movement disorders.

14

3

Share

What time does the Subject 4 exam start in the morning?

Subject 4 morning sessions generally start around 9:00 AM. The Subject 4 exam is typically divided into morning and afternoon sessions, with morning sessions usually starting around 9:00 AM and afternoon sessions at 1:00 or 1:30 PM. However, specific times may vary by location. The exam duration for Subject 4 is 45 minutes, the same as Subject 1, allowing sufficient time for completion at a normal pace. The Subject 4 exam consists of 50 questions, presented in formats such as case studies, images, and animations, with a perfect score of 100 and a passing score of 90. The exam covers topics like safe driving, civilized driving, handling emergencies, and traffic accident procedures. Subject 4, also known as the theoretical driving test, is part of the motor vehicle driver's license assessment. Each Subject 4 exam session offers one retake opportunity. If a candidate fails the first attempt, they can request a retake by having the examiner rescan their ID card. However, failing the retake results in a failed exam, requiring re-registration for Subject 4. Within the three-year validity period, there is no limit to the number of Subject 4 exam registrations. After recent reforms, the Subject 4 question bank has expanded from over 700 to more than 1,000 questions. A practical study method is to complete all questions in the bank before taking mock exams. Upon passing the Subject 4 exam, candidates can receive their driver's license immediately. In addition to the license, they will also receive a probationary driver's badge, which must be displayed on the rear of the vehicle during the probationary period. The back of the driver's license indicates the permitted vehicle types. For example, a C1 license allows driving small cars, small automatic transmission vehicles, low-speed trucks, and three-wheeled vehicles.

14

4

Share

Where is the fuse for the Lamando cigarette lighter located?

Where is the fuel tank cap switch on the Borgward BX5?

What Causes the Squeaking Noise in the Magotan's Chassis?

Where is the fuel tank cap switch of Changan Automobile?

What does the car ECON switch mean?

What are the physical requirements for obtaining a driver's license?

What time does the Subject 4 exam start in the morning?

What are the impacts of idling the car for 10 minutes to warm up?

How to repair a single broken window button?

How often should a China 5 diesel fuel filter be replaced?

Does the six-speed manual-automatic transmission belong to AT or CVT?