Where is the fuse for the interior reading light?
2 Answers
The fuse for the reading light is located inside the cabin, under the cover above the hood release switch. You can see it by removing the cover. However, it is recommended to use the white plastic clip from the engine compartment fuse box when removing the fuse. Here is some information about the reading light: Function: Provides interior lighting. The reading light offers sufficient illumination for passengers when the interior lighting is insufficient, without affecting the driver's normal operation. Some car owners forget to turn off the interior reading light after locking the car, which may lead to battery drain and the car failing to start. If the battery is drained, you can seek help from another car for a jump-start: Connect the red jumper cable to the positive terminal of the dead battery, then connect the black jumper cable to a metal part of the dead car's engine compartment (ensure the positive and negative terminals do not touch); connect the other end of the red jumper cable to the positive terminal of the working car's battery, and the black jumper cable to the negative terminal of the working car's battery.
I've been driving for over a decade. The fuse for the interior reading light is usually located in the fuse box, with its position varying by vehicle model. In most cars, you can find a small box under the dashboard on the driver's side, easily reachable by hand; some vehicles have it in the engine compartment or behind the glove box on the passenger side. I remember last year when my dome light suddenly went out. I checked the owner's manual, which had a fuse box diagram indicating the position labeled 'Dome Light' or 'Interior Light'. Replacing it is simple: first, turn off the engine, use special pliers to pull out the old fuse, check if it's blown, and if so, replace it with a new one of the same amperage—commonly 10A or 15A. Avoid using a higher amperage fuse as it can cause a short circuit. Fuses often blow due to a short in the light or aging. It's advisable to first check if the bulb is intact to prevent recurrence. Safety first—wear gloves to prevent static electricity when handling, and avoid leaving the light on for too long to save power.
