Where is the fuse for the cigarette lighter in a BMW 520?

1 Answers
Leanne
07/30/25 2:09am
BMW 525i cigarette lighter fuse is located at the rear right side of the trunk. Related information: 1. Introduction: The cigarette lighter is a component found in all vehicles, designed to provide a flame source for drivers who smoke. A cigarette lighter is essentially a device used for lighting cigarettes. When not used for smoking, it serves as a power outlet from the car, also known as a cigar lighter. 2. Additional details: The power supply is typically 12V DC (may vary depending on the vehicle model), with the central spring contact as the positive pole and the side clamps (ears) as the negative poles. It is directly connected to the car's battery, sharing the same current and power specifications as the battery.
Was this review help?
7
3
Share
More Forum Discussions

Where is the fuel tank cap switch located on the Fit?

The fuel tank cap switch on the oldest Fit model is located on the left side of the driver's seat; on the newer Fit models, the fuel tank cap switch is positioned at the left footrest area, which can be opened directly by pulling. Below is more information about the Fit: 1. The Fit is a hatchback launched by GAC Honda, with body dimensions of 4065mm in length, 1695mm in width, and 1525mm in height, and a wheelbase of 2530mm. 2. The Fit is equipped with a 1.5L direct-injection DOHC-i-VTEC engine, delivering a maximum power of 96kW and a peak torque of 155N•m, paired with an M-CVT transmission for responsive acceleration and smooth gear shifting.
3
1
Share

Will I Be Fined at Every Intersection for Forgetting to Wear a Seat Belt?

For the same violation of not wearing a seat belt within a single day, the driver will only be penalized once with points deduction and a fine, and will not face repeated penalties. Below is relevant information: Seat Belt: The car seat belt is a safety device designed to restrain occupants during a collision, preventing secondary collisions with the steering wheel, dashboard, etc., or avoiding injuries or fatalities caused by being ejected from the vehicle during a crash. Origin: Seat belts existed even before the invention of automobiles. In 1885, when horse-drawn carriages were commonly used in Europe, seat belts were simple devices meant to prevent passengers from falling off the carriage. By 1910, seat belts began to appear on airplanes.
5
3
Share

What are the brands of German lubricants?

German engine oils are renowned for their quality, with brands such as Liqui Moly, Ravenol, Repsol, and Novi. Below is a related introduction: Liqui Moly Engine Oil: Liqui Moly is the world's first company to grind the solid anti-friction product molybdenum disulfide to less than 0.3μm and successfully suspend it in liquid, achieving the world's first liquid molybdenum disulfide anti-wear product. Engine Oil: Engine oil, also known as engine lubricant, is used to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine.
11
5
Share

Will Recalled Vehicles Depreciate in Value?

Generally, proactive recalls do not necessarily lead to depreciation in the value of used vehicles. However, passive recalls and improper handling methods can not only affect the resale value of used cars but also have a negative impact on the overall brand. More relevant information is as follows: 1. Factors Affecting Resale Value: There are many factors that influence the resale value of used cars, including vehicle condition, age, new car prices, and market-related factors such as car ownership, market demand, and brand reputation. Recalls occur due to issues with critical components, which affect the vehicle's performance and safety. Subsequent "patch" solutions further dissatisfy consumers, and recall incidents may, to some extent, impact the vehicle's resale value. 2. Component Issues: Recalls caused by non-critical component issues do not significantly affect the residual value of vehicles and will not cause price fluctuations.
10
3
Share

Is there a time limit for taking the Subject 4 test after passing Subject 3?

Yes, there is a time limit. Starting from the issuance of the Learning to Drive Certificate by the vehicle management office after passing Subject 1, the validity period is three years. If the Subject 4 test is not completed within these three years, the passing scores of the previous tests will be invalidated. Therefore, it is essential to pass the Subject 4 test within the validity period, although there is no limit on the number of attempts. After passing Subject 3, taking the Subject 4 test can be divided into three scenarios: taking it directly on the same afternoon; taking it within 9 days without an appointment, where you can go to the Subject 4 test center with your ID within 9 days of passing Subject 3; or scheduling an appointment after 10 days, with the success of the appointment depending on the current number of examinees, the priority of the student, and temporary arrangements at the test center. Subject 4, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. It includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Subject 4 test considerations: Test duration: The test lasts 45 minutes, and making 12 mistakes (6 questions) will terminate the test. Number of questions: Depending on the type of driver's license being tested, 50 questions are selected proportionally from the Subject 4 test bank, with each question worth 2 points. Question types: The test includes single-choice questions (including true/false questions) and multiple-choice questions, covering animated questions, picture-based questions, scenario recognition questions, and text-based questions. Retake considerations: If Subject 4 is not passed, only Subject 4 needs to be retaken. The driving school will schedule the retake, with no limit on the number of retakes. Retakes for Subject 4 do not require additional fees. Subject 4 test tips: Strengthen weak areas by identifying the reasons for mistakes. For marked questions, avoid merely memorizing the correct answers. Instead, consult regulations, textbooks, or reference materials to understand and internalize the reasons for errors. Categorize and summarize test questions. Refer to the test bank's analysis for grouping and identifying similar questions. The test bank contains many similar questions that can be confusing, so it's important to analyze and summarize them. For example, traffic signs for walking, hiking, pedestrian caution, crosswalks, and crosswalk caution are very similar and easily confused. Grouping them during study can help avoid mistakes. Find memorization techniques: Many questions in the test bank involve numbers. Summarizing these numbers can make memorization easier. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 divided into two parts. Subject 4 is the colloquial term for the Subject 3 Safe and Civilized Driving Knowledge Test and is not a separate subject. Subject 1 refers to the test on road traffic safety laws, regulations, and related knowledge; Subject 2 refers to the field driving skills test; and Subject 3 refers to the road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Subject 3.
20
0
Share

What is the difference between Audi's 190 horsepower and 252 horsepower?

190 horsepower = 139.7447625 kW of power, 252 horsepower = 185.345685 kW of power, with a difference of approximately 45.6 kW between the two. A 45.6 kW difference is a significant value. The 190 horsepower version uses a low-power 2.0-liter turbocharged engine, while the 252 horsepower version uses a high-power 2.0-liter turbocharged engine. Additional information: Horsepower represents the engine's maximum output power. The formula for calculating power is: Power = Top speed × Thrust. The thrust of a car is equivalent to its driving resistance, which includes aerodynamic drag. The magnitude of aerodynamic drag is related to the car's body shape, weight, and tires.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.