···
Log in / Register

Where is the fuse for the Buick Excelle cigarette lighter located?

3 Answers
VanLondon
09/04/25 4:40am
Buick Excelle cigarette lighter fuse is located in the fuse box under the dashboard cover. Instructions for using the cigarette lighter: 1. Turn on the car power and insert the cigarette lighter into the car power socket; 2. Press down to lock; 3. The cigarette lighter begins heating. When the heating wire reaches the required temperature, it will automatically pop out or wait 5-8 seconds until the heating wire turns red, then manually remove it. Precautions for using the cigarette lighter: 1. Frequent plugging/unplugging may cause the lighter to get stuck in the socket and fail to heat; 2. When the heating wire reaches temperature and glows red, the retaining spring may deform due to high temperature; 3. Regularly check if the socket retaining spring has become loose.
Was this review help?
14
5
Share
ReaganFitz
09/16/25 5:44am
I've been driving a Buick Excelle for several years and have encountered the cigarette lighter losing power multiple times. The fuse location is crucial—it's usually right under the dashboard on the driver's side. Just look down, and you'll see a small panel. Pry it open to access the fuse box. Inside, you'll find a bunch of fuses; look for the one labeled "CIG" or with a cigarette lighter icon, typically rated at 10A or 15A. Remember to turn off the engine and remove the key to prevent electric shock or accidental short circuits. The first time I checked, I mistakenly opened the fuse box in the engine compartment, wasting time. After replacing the fuse, if the issue persists, it could be due to poor contact in the socket or a faulty cigarette lighter, requiring a visit to the repair shop. For daily use, avoid connecting too many USB devices simultaneously, as that can overload and blow the fuse. Maintaining a habit of regular checks can help prevent unexpected issues while on the road.
Was this review help?
12
0
Share
Expand All
OliveRose
10/30/25 6:17am
As someone who often helps friends with car repairs, I find dealing with the cigarette lighter fuse in a Buick Excelle quite straightforward. The fuse is located under the dashboard, specifically in a small panel near the driver's footwell. After prying it open, refer to the diagram on the fuse box cover to locate the corresponding number. The fuse for the cigarette lighter is usually blue or yellow, rated around 15A. Before replacing, ensure the vehicle is turned off. Use a flat-head screwdriver or a specialized tool to carefully remove the old fuse and insert the new one in one go. Avoid using the wrong specification, as it may cause bigger issues. If the cigarette lighter still doesn't work, check if the wiring has aged, a problem more common in winter. Preventive measures include avoiding overload usage, such as not running a phone charger and a cigarette lighter heating cup simultaneously.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What Causes the Audi Cigarette Lighter to Have No Power?

Audi cigarette lighter has no power: mainly caused by a blown fuse of the cigarette lighter. You can locate the fuse box for the vehicle's electrical components, where spare fuses are available, and replace it. Below is relevant information about the cigarette lighter: 1. Function: Vehicles are equipped with cigarette lighters for the convenience of drivers. Although smoking in the car is discouraged, this feature is not removed. Some high-end cars even have an additional cigarette lighter in the rear for the convenience of backseat passengers. 2. Power voltage: The power voltage of the Audi Q5 cigarette lighter is 12 volts. Exceeding this value can easily overload the cigarette lighter, leading to various hazards such as burning out the lighter.
14
4
Share

Does exceeding the oil dipstick upper limit have any impact?

Exceeding the oil dipstick upper limit does have an impact. If the oil level surpasses the upper limit mark on the dipstick, it is recommended that the vehicle owner drain some oil. Otherwise, it may increase the resistance during engine operation and potentially damage the catalytic converter. Below is relevant information about engine oil: 1. Engine oil is referred to as the lifeblood of the engine, serving functions such as lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention. 2. Without engine oil, the engine cannot operate properly. When adding oil, ensure the oil level is between the min and max marks. If the oil level falls below the min mark, the engine may experience poor lubrication.
3
1
Share

How to Correctly Use Lights When Entering and Exiting a Roundabout?

Here is the correct way to use lights when entering and exiting a roundabout: 1. When entering the roundabout and needing to merge into the inner lane, turn on the left turn signal. If the vehicle is turning left, choose the left lane inside the roundabout. At this time, the vehicle needs to move from the outer lane to the inner lane, so the left turn signal should be activated when entering the roundabout. Before exiting the roundabout, the right turn signal should also be turned on in advance, and after confirming safety, the vehicle should move from the inner lane toward the outer line of the roundabout to exit. 2. When entering the roundabout and staying in the outer lane, the turn signal may not be necessary. However, when exiting the roundabout, the right turn signal must be used. If the vehicle is going straight, choose the middle lane inside the roundabout. Since the vehicle does not need to change lanes after entering the roundabout, the left turn signal is not required when entering. However, when preparing to exit the roundabout to continue straight, since the vehicle will cross the right lane inside the roundabout, the right turn signal should be activated to alert other vehicles before exiting. 3. When entering the roundabout and needing to turn right, turn on the right turn signal. If the vehicle is turning right toward another intersection, it can choose the right lane inside the roundabout or use the outer lane with the right turn signal. If the situation when entering the roundabout is similar to going straight, the left turn signal is not required. However, after selecting the corresponding exit, the right turn signal should be activated in advance, and after confirming safety, the vehicle can turn right to exit the roundabout.
8
1
Share

How to Clean Asphalt Splashed on a White Car?

Here are the methods to clean asphalt splashed on a white car: 1. If asphalt is splashed on a white car, do not immediately scrub or rinse the car body to avoid damaging the paint surface. 2. Use high-pressure water to rinse the car body once for preliminary cleaning. 3. If the attached asphalt and other dirt remain, rinse these local areas again, and then wash them with soapy water. 4. If the asphalt has strong adhesion, you can use a special tar cleaner. Spray the tar cleaner on the asphalt, wait a few minutes for the asphalt to melt, and then rinse it thoroughly with water.
17
0
Share

What does ESC mean on a car?

ESC stands for Electronic Stability Control, which is an active safety technology that assists drivers in controlling the vehicle. More information about the Electronic Stability Control system is as follows: 1. The Electronic Stability Control system is an anti-skid device for vehicles that can control both the driving wheels and the driven wheels, including ABS (Anti-lock Braking System) and ASR (Anti-Slip Regulation). 2. While improving the vehicle's handling performance, the Electronic Stability Control system effectively prevents the car from reaching its dynamic limits. The electronic stability program enhances the safety and handling of the vehicle.
13
4
Share

Why Shouldn't You Coast in Neutral When Going Downhill in a Car?

Reasons why coasting in neutral downhill is not recommended: Coasting in neutral relies solely on the brakes for deceleration, which reduces braking effectiveness and increases the risk of accidents. More information about coasting in neutral is as follows: 1. Coasting in neutral, commonly referred to as engine braking, maintains a power connection between the engine and the drive wheels. 2. The primary reason against coasting in neutral is safety. When the gearshift is placed in neutral for coasting, the drive wheels lose their driving force, and the power connection between the engine and the drive wheels is severed. The car then moves forward solely by its own inertia. In case of an emergency requiring braking, all the braking force must be provided by the braking system alone, which has limited capacity.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.